W-KING T9 Party Speaker User Manual

T9 Party Speaker

User Manual

INTRODUCTION

Thank you and congratulations on your choice of W-KING T9I1 Bluetooth Party Speaker. Before using this speaker, please take a few minutes to read this manual, which includes detailed messages concerning the proper operation of the unit.

WHAT’S IN THE BOX

1. Main unit x1
2. Wireless microphone x1
3. Remote control x1
4. Charging cable x1

PRODUCT OVERVIEW

1. Power
   Turn the power on or off. Double press it to enter TWS connecting.

2. Mode
   Press to toggle between Bluetooth, USB and AUX mode. Press and hold for 1 second to disconnect Bluetooth connection.

3. Light
   (1) Press to toggle between different light patterns. (2) 6 light patterns and state, switch order: pattern 1 pattern 2 — pattern 3 – pattern 4—pattem 5 – turn off

4. Speaker state Indicators
   ** Status or Actions| LED status**
   ---|---
   Power on/off| Blue LED on/off
   Bluetooth searching| Blue LED flashes
   Connect successfully| Blue LED constantly on
   ITWS searching| Blue and green LED flashes alternately
   TWS speakers connected, waiting for connecting with
   mobile| Primary speaker: blue LED flashes Secondary speaker: blue LED stays on
   AUX IN mode| Playing: green LED on; Mute: green LED flashes
   USB mode/TF card mode| Indoor mode, playing: green LED stay on Outdoor mode, playing: slowly flashes
   Pause: green LED blink
   EQ modes| Outdoor: stays on; Indoor: slowly flashes
   Low battery| Red LED flashes
   Reset| LED turns off

5. Battery capacity indicators One indicator flashes: voltage lower than 7.2V, capacity less than 30% Two indicators on: voltage 7.2V-7.8V, capacity 30% to 70% Three indicators on: voltage higher than 7.8V, capacity larger than 70%

6. PLAY/PAUSE/MUTE Press to play/pause the music Double press to switch between indoor and outdoor mode

7. Next Press to next song track.

8. Previous Press to previous song track.

9. Volume knob Clockwise: larger volume; Counterclockwise: lower volume.

1. USB storage device Connect to a USB storage device. The speaker can play music stored at the in device. Format: MP3, WAV, APE, FLAC, WMA
2. AUX Connect to an external audio device through a 3.5mm audio cable.
3. TF card reader Insert a TF card to enter TF card mode automatically. The speaker can play music stored at the TF card. Format: MP3, WAV, APE, FLAC, WMA
4. Charging port Insert the included cable to charge the speaker
5. Reset Insert a needle to reset.

USING YOUR W-KING T9

1. Bluetooth Connection
Connect your W-KING T9 with Bluetooth enabled devices.

1. Power on T911, it enters Bluetooth pairing mode automatically;
2. Choose “W-KING T9 ” to connect.
3. Once successfully connected, music will stream to this speaker.

Disconnect Bluetooth.

1. T9 can remember a maximum of 8 paired devices.
2. In Bluetooth mode, press and hold MODE button for 1 second to disconnected.

Remarks:

1. Automatically turn off when there is no connection for 10 minutes.
2. Bluetooth transmission distance may vary with environment.
3. When turn on this speaker next time, it will reconnect to the last connected device automatically. If not, please try manually.

2. TWS Connection
Connect 2pcs T9 together via TWS function

1. In Bluetooth mode, double press POWER Button on one speaker, LED flashes blue and green alternately to enter TWS automatically connection process;
2. After TWS connection build-up, the secondary speaker’s blue LED is constantly on, the primary speaker’s blue LED flashes.
3. Choose “W-KING T9 on you device Bluetooth setting page. Remark: * TWS two T9 should in the same software and hardware version.

3. Charging the Speaker

1. When battery voltage is lower than 6.2V, capacity less than 10%, T9 will power off automatically.
2. Please use included charging cable to charge the speaker.
3. Three battery indicators constantly on when fully charged.
   Remark:

• Remark: to protect the battery, please charge it at least once every 6 months when you don’t use it for a long time.

USING THE MICROPHONE

T9 included one high-quality wireless microphone
1. Pairing

1. Power on the microphone and speaker.
2. Press pairing button within 10 seconds after turn on the microphone, it will enter pairing mode, the display flashes.
3. When microphone display flashes, power on the speaker again, then the microphone will connect with speaker automatically;
4. Press pairing button again to exit pairing mode, then this button will use for switch frequency.
5. Once they are paired, they will reconnect to the speaker automatically.

USING THE REMOTE CONTROL

SPECIFICATIONS

Bluetooth version: 5.0
Product size: 37.219.3316.6cm
Bluetooth transmission distance: 10 meters
Speaker drivers: diameter 102mm, 2pcs, full range
S/N:?80dB
Frequency range: 80Hz-15 KHz
Working time: 6-9 hours
Charging: Type-C USB, 5V / 2A
Charging time: around 5 hours
Battery: built-in lithium battery, 4pcs battery cells total capacity 3.7V/10000mAh, Battery pack 7.4V/5000mAh

• Transmission distance is tested in open space without interference.
• The above data is based on WEIKING laboratory environment and test results; actual playtime may vary with environment and user habit, for reference only.

SAFETY NOTICE

1. Please read and keep this manual for reference.
2. Do not open (or modify in any way) the unit.
3. Do not attempt to repair the unit, or replace parts within it. Refer all servicing to your retailer or an authorized W-KING distributor.
4. Never use or store the unit in an extreme temperature, humid or dusty environment; please not expose the unit to rain or chemical materials, and it’s dangerous to put it in vibration places, please make sure it’s placed stable before using. Please avoid strong impact.
5. When use by children, please make sure an adult provide supervision until they are familiar with operation methods and safe operation notice.

www.w-king.com

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>