W-KING T9II Party Speaker User Manual

June 12, 2024
W-KING

W-KING T9II Party Speaker

INTRODUCTION

Thank you and congratulations on your choice of W-KING T9I Bluetooth Party Speaker.
Before using this speaker, please take a few minutes to read this manual, which includes detailed messages concerning the proper operation of the unit.

WHAT’S IN THE BOX

  1. Main unit ×1
  2. Wireless microphone ×2
  3. Remote control ×1
  4. Charging cable ×1

PRODUCT OVERVIEW

W-KING-T9II-Party-Speaker-1

  1. Power
    Turn the power on or off.
    Double press it to enter TWS connecting.

  2. Mode
    Press to toggle between Bluetooth, USB and AUX mode.
    Press and hold for 1 second to disconnect Bluetooth connection.

  3. Light

  4. Press to toggle between different light patterns.

  5. 6 light patterns and state, switch order: pattern 1 — pattern 2 — pattern 3 — pattern 4-pattern 5 – turn off

  6. Speaker state indicatorsW-KING-T9II-Party-Speaker-2

  7. Battery capacity indicators
    One indicator flashes: voltage lower than 7.2V, capacity less than 30%
    Two indicators on: voltage 7.2V-7.8V, capacity 30% to 70%
    Three indicators on: voltage higher than 7.8V, capacity larger than 70%

  8. PLAY/PAUSE/MUTE
    Press to play/pause the music
    Double press to switch between indoor and outdoor mode

  9. Next
    Press to next song track.

  10. Previous
    Press to previous song track.

  11. Volume knob
    Clockwise: larger volume;
    Counterclockwise: lower volume.

  12. USB storage device
    Connect to a USB storage device. The speaker can play music stored at the in device. Format:
    MP3, WAV, APE, FLAC, WMA

  13. AUX
    Connect to an external audio device through a 3.5mm audio cable.

  14. TF card reader
    Insert a TF card to enter TF card mode automatically. The speaker can play music stored at the
    TF card. Format: MP3, WAV, APE, FLAC, WMA

  15. Charging port
    Insert the included cable to charge the speaker

  16. Reset
    Insert a needle to reset.

USING YOUR W-KING T9I

Bluetooth Connection
Connect your W-KING T91 with Bluetooth enabled devices.

  1. Power on T9I, it enters Bluetooth pairing mode automatically;
  2. Choose “W-KING T9I” to connect.
  3. Once successfully connected, music will stream to this speaker.

Disconnect Bluetooth.

  1. T9I can remember a maximum of 8 paired devices.
  2. In Bluetooth mode, press and hold MODE button for second to disconnected.

Remarks:

  1. Automatically turn off when there is no connection for 10 minutes.
  2. Bluetooth transmission distance may vary with environment.
  3. When turn on this speaker next time, it will reconnect to the last connected device automatically.
    If not, please try manually.

TWS Connection
Connect 2pcs T9I together via TWS function

  1. In Bluetooth mode, double press POWER Button on one speaker, LED flashes blue and green alternately to enter TWS automatically connection process;
  2. After TWS connection build-up, the secondary speaker’s blue LED is constantly on, the primary speaker’s blue LED flashes.
  3. Choose “W-KING T9I” on you device Bluetooth setting page.

Remark:
TWS two T9I should in the same software and hardware version.

Charging the Speaker

  1. When battery voltage is lower than 6.2V, capacity less than 10%, T9I will power off automatically.
  2. Please use included charging cable to charge the speaker.
  3. Three battery indicators constantly on when fully charged.

Remark:
Remark: to protect the battery, please charge it at least once every 6 months when you don’t use it for a long time.

USING THE MICROPHONE

T9I included one high-quality wireless microphone

Pairing

  1. Power on the microphone and speaker.
  2. Press pairing button within 10 seconds after turn on the microphone, it will enter pairing mode, the display flashes.
  3. When microphone display flashes, power on the speaker again, then the microphone will connect with speaker automatically;
  4. Press pairing button again to exit pairing mode, then this button will use for switch frequency.
  5. Once they are paired, they will reconnect to the speaker automatically.

W-KING-T9II-Party-Speaker-4

USING THE REMOTE CONTROL

W-KING-T9II-Party-Speaker-5

SPECIFICATIONS

  • Bluetooth version: 5.0
  • Product size: 37.219.3316.6cm
  • Bluetooth transmission distance: 10 meters
  • Speaker drivers: diameter 102mm, 2pcs, full range
  • S/N:≥80dB
  • Frequency range: 80Hz-15 KHz
  • Working time: 6-9 hours
  • Charging: Type-C USB, 5V / 2A
  • Charging time: around 5 hours
  • Battery: built-in lithium battery, pcs battery cells total capacity 3.7V/10000mAh,
  • Battery pack 7.4V/5000mAh
    Transmission distance is tested in open space without interference.
    The above data is based on WEIKING laboratory environment and test results; actual playtime may vary with environment and user habit, for reference only.

SAFETY NOTICE

  1. Please read and keep this manual for reference.
  2. Do not open (or modify in any way) the unit.
  3. Do not attempt to repair the unit, or replace parts within it. Refer all servicing to your retailer or an authorized W-KING distributor.
  4. Never use or store the unit in an extreme temperature, humid or dusty environment; please not expose the unit to rain or chemical materials, and its dangerous to put it in vibration places, please make sure it’s placed stable before using. Please avoid strong impact.
  5. When use by children, please make sure an adult provide supervision until they are familiar with operation methods and safe operation notice.

www.w-king.com

Read User Manual Online (PDF format)

Loading......

Download This Manual (PDF format)

Download this manual  >>

W-KING User Manuals

Related Manuals