UDIRC P10-3032 Remote Control Car User Guide
- June 1, 2024
- Udirc
Table of Contents
UDIRC P10-3032 Remote Control Car
Transmitter operation guide
P10-3032
Twist forward to the maximum 3 times to turn on the emergency lights.
Transmitter function main interface
The steering rudder amount is recommended to be controlled within 75% to avoid excessive steering resulting in friction between the front wheel and the car shell, and the appropriate steering range can better maintain the body attitude and control comfort.
Assembly of the transmitter battery
Open the battery cover at the bottom of the transmitter and install correctly according to the battery polarity direction specified in the battery box. Or insert the lithium battery of the JST head into the external battery connector of the battery compartment.
Receiver
Frequency matching
After changing the transmitter
The transmitter should be turned on first, press and hold the code key of the receiver for 3 seconds, the indicator light will flash to indicate that it enters the code matching mode, and the receiver will automatically look for the nearest remote-control signal, the indicator light will be on after the code matching is successful.
Control
Throttle trigger
Steering wheel
Steering wheel
Turn left and move forward
Turn right and move forward
Turn left and move backward
Turn right and move backward
Low speed
Pull the throttle trigger back gently and the car will move forward slowly.
High speed
The throttle trigger is pulled to the maximum, and theca moves forward quickly.
Brake
When the car is moving forward, the throttle trigger is pushed forward and the car stops moving.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>