GAGGIA Ruby Pro PRO 1G Pour Over Instructions
- June 13, 2024
- Gaggia
Table of Contents
GAGGIA Ruby Pro PRO 1G Pour Over Instructions
| Model | PRO 1G |
|---|
- Pour Over
|
- Direct Connection
Dimensions (WxHxD)| 16.8″ x 14.5″ x 20.2″
Weight| 55 lb
Power Cord Plug| NEMA 5-15P
Max Absorbed Power| 1640 W
Voltage & Frequency| 120 V / 60 Hz
GENERAL MACHINE ENVIRONMENT
- The installation area is clean and clear of dust and tools. It is not located in an active construction zone.
- The counter accommodates the machine size and weight (check selected model).
- An access hole has been pre-drilled in the counter for drainage and power in accordance with model installation template.
- Hole in counter is fitted with a collar to protect electrical cord, water line & drain tube.
- Machine can safely be installed with minimum clearances of 3” from the back wall, 4” on each side and 12” on top.
ELECTRICAL REQUIREMENTS
- The installation area is clean and clear of dust and tools. It is not located in an active construction zone.
- The counter accommodates the machine size and weight (check selected model).
- An access hole has been pre-drilled in the counter for drainage and power in accordance with model installation template.
- Hole in counter is fitted with a collar to protect electrical cord, water line & drain tube.
- Machine can safely be installed with minimum clearances of 3” from the back wall, 4” on each side and 12” on top.
ELECTRICAL REQUIREMENTS
- The installation area is clean and clear of dust and tools. It is not located in an active construction zone.
- The counter accommodates the machine size and weight (check selected model).
- An access hole has been pre-drilled in the counter for drainage and power in accordance with model installation template.
- Hole in counter is fitted with a collar to protect electrical cord, water line & drain tube.
- Machine can safely be installed with minimum clearances of 3” from the back wall, 4” on each side and 12” on top.
ELECTRICAL REQUIREMENTS
- Power outlet receptacle is NEMA 5-15R.
- Dedicated electrical circuit meets the selected Ruby model power requirements.
- No extension cord or power strip on the circuit.
SPECIFICATIONS
- pH range is between 6.5 & 7.5.
- Hardness (TDS) is between 89 PPM & 142 PPM.
Water Network
- Pressure is between 2.9 PSI & 72.5 PSI.
- The water network provides cold, drinkable tap water.
- Dedicated 3/8” diameter water line.
- Shutoff valve with a 3/8” G male pipe fitting on machine’s end.
- Machine water line is equipped with softness/filtration system and descaling device.
HIGHLY RECOMMENDED: Connection to a floor drain in accordance with local health code.
Evoca North America
2355, avenue Dalton, Québec (Québec) G1P 3S3 Canada
T: 800-561-6162
F: 800-463-2739
www.evocagroupna.com
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>