Canon EOS REBEL T6 Digital SLR Camera Instruction Manual
- June 13, 2024
- Canon
Table of Contents
Canon EOS REBEL T6 Digital SLR Camera
Product Information
The EOS REBEL T6 (W) or EOS 1300D (W) is a digital single-lens reflex camera featuring a fine-detail CMOS sensor with approximately 18.0 effective megapixels. It is equipped with DIGIC 4+ technology, a high-precision and high-speed 9-point autofocus system, and can shoot continuously at approximately 3.0 frames per second. The camera also supports Live View shooting and Full High-Definition (Full HD) movie shooting. Additionally, it has wireless functions including Wi-Fi and NFC connectivity.
Product Usage Instructions
Before starting to shoot, it is important to read the Safety Precautions (pages 13-15) and Handling Precautions (pages 16-18) to avoid any accidents or issues. It is also recommended to read the Camera Basic Instruction Manual carefully to ensure proper usage.
While using the camera, refer to the manual for further familiarization with its features and functions. It is suggested to take a few test shots and review the results to better understand the camera’s capabilities. Keep the manual stored safely for future reference.
After shooting, it is advisable to play back the images and confirm that they have been properly recorded. If any issues arise with the camera or memory card, Canon cannot be held liable for any loss or inconvenience caused.
It is important to note that copyright laws may prohibit the use of recorded images or copyrighted music and images with music for anything other than private enjoyment. Furthermore, certain public performances or exhibitions may prohibit photography even for private enjoyment.
Item Check List
Before starting, ensure that the following items are included with your camera:
- Camera (with eyecup and body cap)
- Battery Pack LP-E10 (with protective cover)
- Battery Charger LC-E10/LC-E10E*
- Strap
- Interface Cable
If any of the above items are missing, please contact your
dealer. If you purchased a Lens Kit, make sure to check if the
lenses are included. Depending on the Lens Kit type, lens
instruction manuals may also be included. Do not lose any of the
provided items.
If you require Lens Instruction Manuals, you can download them
from the Canon Web site. Please note that when purchasing the Lens
Kit, some of the accessories included with the lens may not match
those listed in the Lens Instruction Manual.
For more detailed information and instructions, refer to the
Camera and Wireless Function Basic Instruction Manual provided with
the camera. Additional Instruction Manuals (PDF files) can be
downloaded from the Canon Web site.
To download and view the Instruction Manuals (PDF files), visit
the Canon Web site mentioned in the user manual.
EOS REBEL T6 (W) EOS 1300D (W)
Camera Wireless Function
Basic Instruction Manual
Instruction manuals (PDF files) and software can be downloaded
from the Canon Web site (p.4, 103). www.canon.com/icpd
E
EOS REBEL T6 (W) EOS 1300D (W)
Camera Basic Instruction Manual
The Camera Basic Instruction Manual covers the most basic operations and
functions.
Introduction
The EOS REBEL T6 (W) or EOS 1300D (W) is a digital single-lens reflex camera
featuring a fine-detail CMOS sensor with approx. 18.0 effective megapixels,
DIGIC 4+, high-precision and high-speed 9-point AF, approx. 3.0 fps continuous
shooting, Live View shooting, Full HighDefinition (Full HD) movie shooting,
and wireless functions (Wi-Fi/NFC).
Before Starting to Shoot, Be Sure to Read the Following
To avoid botched pictures and accidents, first read the “Safety Precautions”
(p.13-15) and “Handling Precautions” (p.16-18). Also, read this manual
carefully to ensure that you use the camera correctly.
Refer to This Manual while Using the Camera to Further Familiarize Yourself
with the Camera
While reading this manual, take a few test shots and see how they come out.
You can then better understand the camera. Be sure to store this manual
safely, too, so that you can refer to it again when necessary.
Testing the Camera Before Use and Liability
After shooting, play images back and check whether they have been properly
recorded. If the camera or memory card is faulty and the images cannot be
recorded or downloaded to a computer, Canon cannot be held liable for any loss
or inconvenience caused.
Copyrights
Copyright laws in your country may prohibit the use of your recorded images or
copyrighted music and images with music in the memory card for anything other
than private enjoyment. Also be aware that certain public performances,
exhibitions, etc., may prohibit photography even for private enjoyment.
2
Item Check List
Before starting, check that all the following items are included with your
camera. If anything is missing, contact your dealer.
Camera (with eyecup and body cap)
Battery Pack LP-E10 (with protective cover)
Battery Charger LC-E10/LC-E10E*
Strap
Interface Cable
- Battery Charger LC-E10 or LC-E10E is provided. (The LC-E10E comes with a power cord.)
The Instruction Manuals provided are listed on the next page. If you purchased a Lens Kit, check that the lenses are included. Depending on the Lens Kit type, lens instruction manuals may also be
included. Be careful not to lose any of the above items.
When you need Lens Instruction Manuals, download them from the Canon Web site
(p.4). The lens instruction manuals (PDF) are for lenses sold individually.
Note that when purchasing the Lens Kit, some of the accessories included with
the lens may not match those listed in the Lens Instruction Manual.
3
Instruction Manuals
Camera and Wireless Function Basic Instruction Manual The booklet is the Basic
Instruction Manual. More detailed Instruction Manuals (PDF files) can be
downloaded from the Canon Web site.
Downloading and Viewing the Instruction Manuals (PDF Files)
1 Download the Instruction Manuals (PDF files).
Connect to the Internet and access the following Canon Web site.
www.canon.com/icpd
Select your country or region of residence and download the Instruction
Manuals.
Instruction Manuals Available for Download
· Camera Instruction Manual · Wireless Function Instruction Manual · Camera
and Wireless Function Basic Instruction Manual · Lens Instruction Manuals ·
Software Instruction Manuals
2 View the Instruction Manuals (PDF files).
Double-click a downloaded Instruction Manual (PDF file) to open it.
To view the Instruction Manuals (PDF files), Adobe Acrobat Reader DC or other
Adobe PDF viewer (most recent version recommended) is required.
Adobe Acrobat Reader DC can be downloaded free from the Internet.
To learn how to use a PDF viewer, refer to its Help section.
Software can be downloaded from the Canon Web site (p.103).
4
Compatible Cards
The following cards can be used with the camera regardless of capacity: If the
card is new or was previously formatted by another camera or computer, it is
recommended that you format the card with this camera (p.44).
· SD memory cards · SDHC memory cards · SDXC memory cards
The camera can use UHS-I cards, but since it is not compatible with the UHS-I
standard, reading/writing speeds will be equivalent to SD Speed Class 10 at
most.
Cards that Can Record Movies
When shooting movies, use a large-capacity SD card rated SD
Speed Class 6 ”
” or higher.
If you use a slow-writing card when shooting movies, the movie may
not be recorded properly. Also, if you play back a movie on a card
with a slow reading speed, the movie may not play back properly.
To check the card’s reading/writing speed, refer to the card
manufacturer’s Web site.
In this manual, “card” refers to SD memory cards, SDHC memory cards, and SDXC
memory cards. * The camera does not come with a card for recording images/
movies. Please purchase it separately.
5
Quick Start Guide
1
Insert the battery (p.28).
To charge the battery, see page 26.
2
Insert the card (p.28).
With the card’s label facing toward
the back of the camera, insert it into
the card slot.
3 White index
Red index
Attach the lens (p.36).
Align the lens’s white or red mount index with the camera’s mount index of the
same color.
4
Set the lens’s focus mode switch to
5
6
Set the power switch to <1> (p.31).
When the LCD monitor displays the date/time/zone setting screens, see page 33.
Quick Start Guide
6
Set the Mode Dial to (Scene Intelligent Auto) (p.50).
All the necessary camera settings
will be set automatically.
7
Focus on the subject (p.39).
Look through the viewfinder and
aim the viewfinder center over the
subject.
Press the shutter button halfway, and
the camera will focus on the subject.
If necessary, the built-in flash will be
raised.
8
Take the picture (p.39).
Press the shutter button completely
to take the picture.
9
Review the picture.
The captured image will be
displayed for approx. 2 sec. on the
LCD monitor.
To display the image again, press
the
To shoot while looking at the LCD monitor, see “Live View Shooting” (p.69).
To view the images captured so far, see “Image Playback” (p.68). To delete an
image, see “Erasing Images” (p.98).
7
Conventions Used in this Manual
Icons in this Manual
<6>: Indicates the Main Dial.
bottom, left, and right.
<0>: Indicates the Setting button.
0, 9, 7, 8 : Indicates that each function remains active for approx. 4 sec., 6 sec., 10 sec., or 16 sec. after you let go of the button.
- In addition to the above, the icons and symbols used on the camera’s buttons and displayed on the LCD monitor are also used in this manual when discussing relevant operations and functionality.
3 M
(p.**)
: Indicates a function that can be changed by pressing the
: When shown on the upper right of a page, it indicates that the function is
available only in the Creative Zone modes (p.23).
: Reference page numbers for more information. : Warning to prevent shooting
problems. : Supplemental information. : Tips or advice for better shooting. :
Troubleshooting advice.
Basic Assumptions
All operations explained in this manual assume that the power switch is set to
8
Chapters
Introduction
2
1 Getting Started
25
2 Basic Shooting and Image Playback
49
3 Shooting with the LCD Monitor (Live View Shooting)
69
4 Shooting Movies
83
5 Image Playback
93
6 Software Start Guide / Downloading Images to a Computer
101
9
Contents
Introduction
2
Item Check List……………………………………………………………………… 3 Instruction Manuals ……………………………………………………………….. 4 Compatible Cards………………………………………………………………….. 5 Quick Start Guide ………………………………………………………………….. 6 Conventions Used in this Manual…………………………………………….. 8 Chapters………………………………………………………………………………. 9 Safety Precautions ………………………………………………………………. 13 Handling Precautions …………………………………………………………… 16 Nomenclature ……………………………………………………………………… 19
1 Getting Started
25
Charging the Battery ……………………………………………………………. 26 Installing and Removing the Battery and Card …………………………. 28 Turning on the Power …………………………………………………………… 31 Setting the Date, Time, and Zone…………………………………………… 33 Selecting the Interface Language…………………………………………… 35 Attaching and Detaching a Lens…………………………………………….. 36 Basic Operation…………………………………………………………………… 38 Q Quick Control for Shooting Functions ………………………………… 40 3 Menu Operations………………………………………………………… 42 Formatting the Card …………………………………………………………….. 44 Switching the LCD Monitor Display ………………………………………… 46 Feature Guide …………………………………………………………………….. 47
10
Contents
2 Basic Shooting and Image Playback
49
A Fully Automatic Shooting (Scene Intelligent Auto) ……………….50 A Full Auto Techniques (Scene Intelligent Auto)……………………..53 7 Disabling Flash ………………………………………………………………. 55 C Creative Auto Shooting…………………………………………………….56 2 Shooting Portraits ……………………………………………………………. 59 3 Shooting Landscapes ……………………………………………………… 60 4 Shooting Close-ups…………………………………………………………..61 5 Shooting Moving Subjects ……………………………………………….. 62 P Shooting Food …………………………………………………………………. 63 6 Shooting Night Portraits …………………………………………………….64 Q Quick Control………………………………………………………………….. 66
x Image Playback ………………………………………………………………68
3 Shooting with the LCD Monitor (Live View Shooting) 69
A Shooting with the LCD Monitor …………………………………………. 70 Using AF to Focus (AF
Method) …………………………………………….. 73
4 Shooting Movies
83
k Shooting Movies ……………………………………………………………..84
Autoexposure Shooting ……………………………………………………….84
Setting the Movie Recording Size……………………………………………89
5 Image Playback
93
x Searching for Images Quickly ……………………………………………94 u/y Magnified View
…………………………………………………………… 95 k Playing Back Movies………………………………………………………..96
L Erasing Images ……………………………………………………………….. 98 B Shooting Information Display
…………………………………………. 99
11
Contents
6 Software Start Guide /
Downloading Images to a Computer
101
Software Start Guide ………………………………………………………….. 102 Downloading and Viewing the Software Instruction Manuals (PDF Files) ……………………………………………………………………….. 104 Downloading Images to a Computer …………………………………….. 105 Index…………………………………………………………………………………. 111
For Troubleshooting guide and Specifications, refer to the Instruction Manual
downloadable from the Canon Web site. For how to download the Instruction
Manual, see page 4.
Certification Logo Under the [53] tab, if you select [Certification Logo
Display] and press <0>, some of the logos of the camera’s certifications will
appear. Other certification logos can be found in this Instruction Manual, on
the camera body, and on the camera’s package.
12
Safety Precautions
The following precautions are provided to prevent harm or injury to yourself
and others. Make sure to thoroughly understand and follow these precautions
before using the product. If you experience any malfunctions, problems, or
damage to the product, contact the nearest Canon Service Center or the dealer
from whom you purchased the product.
Warnings:
Follow the warnings below. Otherwise, death or serious injuries may result.
To prevent fire, excessive heat, chemical leakage, explosions, and electrical
shock, follow the safeguards below: · Do not use any batteries, power sources,
or accessories not specified in the Instruction Manual. Do not use any home-
made or modified batteries, or the product if it is damaged. · Do not short-
circuit, disassemble, or modify the battery. Do not apply heat or solder to
the battery. Do not expose the battery to fire or water. Do not subject the
battery to strong physical shock. · Do not insert the battery’s plus and minus
ends incorrectly. · Do not recharge the battery in temperatures outside the
allowable charging (working) temperature range. Also, do not exceed the
recharge time indicated in the Instruction Manual. · Do not insert any foreign
metallic objects into the electrical contacts of the camera, accessories,
connecting cables, etc.
When disposing of a battery, insulate the electrical contacts with tape.
Contact with other metallic objects or batteries may cause a fire or an
explosion.
If excessive heat, smoke, or fumes are emitted when recharging the battery,
immediately unplug the battery charger from the power outlet to stop
recharging. Otherwise, it may cause a fire, heat damage, or electrical shock.
If the battery leaks, changes color, deforms, or emits smoke or fumes, remove
it immediately. Be careful not to get burned in the process. It may cause a
fire, electrical shock or burns if you keep using it.
Prevent any battery leakage from contacting your eyes, skin, and clothing. It
can cause blindness or skin problems. If the battery leakage comes in contact
with your eyes, skin, or clothing, flush the affected area with lots of clean
water without rubbing it. See a physician immediately.
Do not leave any cords near a heat source. It can deform the cord or melt the
insulation and cause a fire or electrical shock.
Do not hold the camera in the same position for long periods of time. Even if
the camera does not feel too hot, prolonged contact with the same body part
may cause skin redness or blistering due to low-temperature contact burns.
Using a tripod is recommended for people with circulation problems or very
sensitive skin, or when using the camera in very hot places.
Do not fire the flash at anyone driving a car or other vehicle. It may cause
an accident.
13
Safety Precautions
When the camera or accessories are not in use, make sure to remove the
battery, and disconnect the power plug and connecting cables from the
equipment before storing. This is to prevent electrical shock, excessive heat,
fire, and corrosion.
Do not use the equipment where there is flammable gas. This is to prevent an
explosion or a fire.
If you drop the equipment and the casing breaks open to expose the internal
parts, do not touch the exposed internal parts. There is a possibility of an
electrical shock.
Do not disassemble or modify the equipment. High-voltage internal parts can
cause electrical shock.
Do not look at the sun or an extremely bright light source through the camera
or lens. Doing so may damage your vision.
Keep equipment out of the reach of children and infants, including when in
use. Straps or cords may accidentally cause choking, electrical shock, or
injury. Choking or injury may also occur if a child or infant accidentally
swallows a camera part or accessory. If a child or infant swallows a part or
accessory, consult a physician immediately.
Do not use or store the equipment in dusty or humid places. Likewise, keep the
battery away from metallic items and store it with its protective cover
attached to prevent short-circuit. This is to prevent fire, excessive heat,
electrical shock, and burns.
Before using the camera inside an airplane or hospital, check if it is
allowed. Electromagnetic waves emitted by the camera may interfere with the
plane’s instruments or the hospital’s medical equipment.
To prevent a fire and electrical shock, follow the safeguards below: · Always
insert the power plug all the way in. · Do not handle a power plug with wet
hands. · When unplugging a power plug, grasp and pull the plug instead of the
cord. · Do not scratch, cut, or excessively bend the cord or put a heavy
object on the cord. Also, do not twist or tie the cords. · Do not connect too
many power plugs to the same power outlet. · Do not use a cord whose wire is
broken or insulation is damaged.
Unplug the power plug periodically and clean off the dust around the power
outlet with a dry cloth. If the surrounding is dusty, humid, or oily, the dust
on the power outlet may become moist and short-circuit the outlet, causing a
fire.
Do not connect the battery directly to an electrical outlet or a car’s
cigarette lighter outlet. The battery may leak, generate excessive heat or
explode, causing fire, burns, or injuries.
A thorough explanation of how to use the product by an adult is required when
the product is used by children. Supervise children while they are using the
product. Incorrect usage may result in electrical shock or injury.
Do not leave a lens or lens-attached camera in the sun without the lens cap
attached. Otherwise, the lens may concentrate the sun’s rays and cause a fire.
Do not cover or wrap the product with a cloth. Doing so may trap heat within
and cause the casing to deform or catch fire.
Be careful not to get the camera wet. If you drop the product in the water or
if water or metal get inside the product, promptly remove the battery. This is
to prevent fire, electrical shock, and burns.
Do not use paint thinner, benzene, or other organic solvents to clean the
product. Doing so may cause fire or a health hazard.
14
Safety Precautions
2 Cautions:
Follow the cautions below. Otherwise, physical injury or property damage may result.
Do not use or store the product in a high-temperature location such as inside
a car under the hot sun. The product may become hot and cause burns. Doing so
may also cause battery leakage or explosion, which will degrade the
performance or shorten the life of the product.
Do not carry the camera around when it is attached to a tripod. Doing so may
cause an injury or an accident. Also make sure the tripod is sturdy enough to
support the camera and lens.
Do not leave the product in a low-temperature environment for an extended
period of time. The product will become cold and may cause injury when
touched.
Do not fire the flash near the eyes. It may hurt the eyes.
15
Handling Precautions
Camera Care
This camera is a precision instrument. Do not drop it or subject it to
physical shock.
The camera is not waterproof and cannot be used underwater. If you
accidentally drop the camera into water, promptly consult the nearest Canon
Service Center. Wipe off any water droplets with a dry and clean cloth. If the
camera has been exposed to salty air, wipe it with a well-wrung wet cloth.
Never leave the camera near anything having a strong magnetic field such as a
magnet or electric motor. Also, avoid using or leaving the camera near
anything emitting strong radio waves, such as a large antenna. Strong magnetic
fields can cause camera misoperation or destroy image data.
Do not leave the camera in excessive heat, such as in a car in direct
sunlight.
The camera contains precision electronic circuitry. Never attempt to
disassemble the camera yourself.
Do not block the built-in flash or mirror operation with your finger, etc.
Doing so may cause a malfunction.
Use only a commercially-available blower to blow away dust when it adheres to
the lens, viewfinder, reflex mirror, focusing screen, etc. Do not use cleaners
that contain organic solvents to clean the camera body or lens. For stubborn
dirt, take the camera to the nearest Canon Service Center.
Do not touch the camera’s electrical contacts with your fingers. This is to
prevent the contacts from corroding. Corroded contacts may cause camera
misoperation.
If the camera is suddenly brought in from the cold into a warm room,
condensation may form on the camera and internal parts. To prevent
condensation, first put the camera in a sealed plastic bag and let it adjust
to the warmer temperature before taking it out of the bag.
16
Handling Precautions
If condensation forms on the camera, do not use the camera. This is to avoid
damaging the camera. If there is condensation, remove the lens, card and
battery from the camera, and wait until condensation has evaporated before
using the camera.
If the camera will not be used for an extended period, remove the battery and
store the camera in a cool, dry, well-ventilated location. Even while the
camera is in storage, press the shutter button a few times once in a while to
check that the camera is still working.
Avoid storing the camera where there are chemicals that result in rust and
corrosion such as in a chemical lab.
If the camera has not been used for an extended period, test all its functions
before using it. If you have not used the camera for some time or if there is
an important shoot such as a foreign trip coming up, have the camera checked
by your nearest Canon Service Center or check the camera yourself and make
sure it is working properly.
If you use continuous shooting, Live View shooting, or movie shooting for a
prolonged period, the camera may become hot. This is not a malfunction.
If there is a bright light source inside or outside the image area, ghosting
may occur.
LCD Monitor
Although the LCD monitor is manufactured with very high precision technology
with over 99.99% effective pixels, there may be a few dead pixels displaying
only black or red, etc. among the remaining 0.01% or less pixels. Dead pixels
are not a malfunction. They do not affect the images recorded.
If the LCD monitor is left on for a prolonged period, screen burn-in may occur
where you see remnants of what was displayed. However, this is only temporary
and will disappear when the camera is left unused for a few days.
The LCD monitor display may seem slow in low temperatures, or look black in
high temperatures. It will return to normal at room temperature.
17
Handling Precautions
Cards
To protect the card and its recorded data, note the following: Do not drop,
bend, or wet the card. Do not subject it to excessive force,
physical shock, or vibration. Do not touch the card’s electronic contacts with
your fingers or anything
metallic. Do not affix any stickers, etc., on the card. Do not store or use
the card near anything that has a strong magnetic field,
such as a TV set, speakers, or magnets. Also avoid places prone to having
static electricity. Do not leave the card in direct sunlight or near a heat
source. Store the card in a case, etc. Do not store the card in hot, dusty, or
humid locations.
Lens
After detaching the lens from the camera, put down the lens with the rear end
up and attach the rear lens cap to avoid scratching the lens surface and
electrical contacts.
Contacts
Smudges Adhering to the Front of the Sensor
Besides dust entering the camera from outside, in rare cases lubricant from
the camera’s internal parts may adhere to the front of the sensor. If visible
spots remain on the image, having the sensor cleaned by a Canon Service Center
is recommended.
18
Nomenclature
Mode Dial (p.23) Power switch (p.31)
Shutter button (p.39)
Red-eye reduction/ Self-timer lamp
Built-in flash/AF-assist beam emitter EF Lens mount index (p.36) EF-S Lens
mount index (p.36) Flash sync contacts Hot shoe Microphone (p.84)
Strap mount (p.25)
Grip
Mirror Contacts (p.18) Lens mount Lens lock pin
p (N-Mark)*
Terminal cover Lens release button (p.37)
Remote control terminal
Body cap (p.36)
Digital terminal (p.105) HDMI mini OUT terminal
- Used for wireless connections via the NFC function.
19
Nomenclature
Live View shooting/ Movie shooting button (p.70/84)
Dioptric adjustment knob (p.38) Eyecup
Viewfinder eyepiece
Display button (p.46, 68, 72, 86)
<A/Hy> AE lock/ FE lock button/Index/ Reduce button (p.94/95)
<S/u> AF point selection button/ Magnify button (p.95)
LCD monitor (p.42)
DC cord hole
<O/L> Aperture/ Exposure compensation button/ Erase button (p.98)
Quick Control button (p.40)
Tripod socket
Serial number
Card slot/Battery compartment cover (p.28) Card slot/Battery compartment cover
release lever (p.28) Access lamp (p.30)
Card slot (p.28) Battery compartment (p.28)
20
Nomenclature
Shooting Function Settings (in Creative Zone modes, p.23)
c Main Dial pointer
Shutter speed
Shooting mode
Exposure level indicator Exposure compensation amount AEB range
Picture Style
AF operation X: One-Shot AF 9: AI Focus AF Z: AI Servo AF MF: Manual Focus
Quick Control icon (p.40, 66)
Battery level (p.32) zxcn
White balance Q Auto: Ambience priority Qw Auto: White priority W Daylight E
Shade R Cloudy Y Tungsten light U White fluorescent light I Flash O Custom
Aperture
Auto Lighting Optimizer
ISO speed
Highlight tone priority
y Flash exposure compensation 0 External flash exposure compensation
Raise built-in flash (p.41)
Image-recording quality 73 Large/Fine 83 Large/Normal 74 Medium/Fine 84
Medium/Normal 7a Small 1/Fine 8a Small 1/Normal b Small 2 (Fine) c Small 3
(Fine) 1+73 RAW+Large/Fine 1 RAW
Possible shots
Possible shots during WB bracketing Self-timer countdown u White balance
correction B White balance bracketing
Drive/self-timer u Single shooting i Continuous shooting j Self-timer: 10 sec. l Self-timer: 2 sec. q Self-timer: Continuous
Metering mode q Evaluative metering w Partial metering e Center-weighted
average metering
GPS connection indicator
Eye-Fi transmission status
The display will show only the settings currently applied.
21
Nomenclature
Viewfinder Information
Focusing screen
AF point activation indicator <·> AF point
ISO speed White balance correction
The display will show only the settings currently applied.
22
Nomenclature
Mode Dial The Mode Dial includes the Basic Zone modes, Creative Zone modes,
and the Movie shooting mode.
Creative Zone These modes give you more control for shooting various subjects
as desired. d : Program AE s : Shutter-priority AE f : Aperture-priority AE a
: Manual exposure
Basic Zone All you do is press the shutter button. The camera sets everything
to suit the subject or scene for shooting. A : Scene Intelligent Auto (p.50) 7
: Flash Off (p.55) C : Creative Auto (p.56)
Image Zone 2 : Portrait (p.59) 3 : Landscape (p.60) 4 : Close-up (p.61) 5 :
Sports (p.62) P : Food (p.63) 6 : Night Portrait (p.64)
k: Movie Shooting (p.83)
23
Nomenclature
Battery Charger LC-E10 Charger for Battery Pack LP-E10 (p.26)
Power plug
Charge lamp
Full-charge lamp Battery pack slot
IMPORTANT SAFETY INSTRUCTIONS-SAVE THESE INSTRUCTIONS. DANGER-TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, CAREFULLY FOLLOW THESE INSTRUCTIONS. For connection to a supply not in the U.S.A., use an attachment plug adapter of the proper configuration for the power outlet, if needed.
Battery Charger LC-E10E Charger for Battery Pack LP-E10 (p.26).
Battery pack slot
Full-charge lamp
Power cord
24
Charge lamp
Power cord socket
1
Getting Started
This chapter explains preparatory steps before you start shooting and basic
camera operations.
Attaching the Strap Pass the end of the strap through the camera’s strap mount
eyelet from the bottom. Then pass it through the strap’s buckle as shown in
the illustration. Pull the strap to take up any slack and make sure the strap
will not loosen from the buckle. The eyepiece cover is attached to
the strap.
Eyepiece cover
25
Charging the Battery
1 Remove the protective cover. Detach the protective cover provided with the
battery.
2 Attach the battery. As shown in the illustration, attach the battery securely to the charger. To detach the battery, follow the above procedure in reverse.
LC-E10
3 Recharge the battery. For LC-E10 As shown by the arrow, flip out the battery charger’s prongs and insert the prongs into a power outlet.
Full-charge lamp Charge lamp
LC-E10E
For LC-E10E
Connect the power cord to the charger and insert the plug into a power outlet.
Recharging starts and the charge lamp lights up in orange.
When the battery is fully recharged, the full-charge lamp will light up in
green.
It takes approx. 2 hours to fully recharge a completely exhausted battery at
room temperature (23°C / 73°F). The time required to recharge the battery will
vary greatly depending on the ambient temperature and the battery’s remaining
capacity.
For safety reasons, recharging in low temperatures (6°C – 10°C / 43°F – 50°F)
will take longer (up to approx. 4 hours).
26
Charging the Battery
Tips for Using the Battery and Charger
Upon purchase, the battery is not fully charged. Charge the battery before
use.
Recharge the battery on the day before or on the day it is to be used. Even
during storage, a charged battery will gradually drain and lose its capacity.
After recharging the battery, detach it and disconnect the charger from the
power outlet.
When not using the camera, remove the battery. If the battery is left in the
camera for a prolonged period, a small amount of power current is released,
resulting in excess discharge and shorter battery life. Store the battery with
the protective cover (provided) attached. Storing the battery when it is fully
charged may lower the battery’s performance.
The battery charger can also be used in foreign countries. The battery charger
is compatible with a 100 V AC to 240 V AC 50/ 60 Hz power source. If
necessary, attach a commercially-available plug adapter for the respective
country or region. Do not attach any portable voltage transformer to the
battery charger. Doing so can damage the battery charger.
If the battery becomes exhausted quickly even after being fully charged, the
battery has reached the end of its service life. Purchase a new battery.
After disconnecting the charger’s power plug, do not touch the prongs for at
least 3 sec.
Do not charge any battery other than a Battery Pack LP-E10. Battery Pack
LP-E10 is dedicated to Canon products only. Using it with
an incompatible battery charger or product may result in malfunction or
accidents for which Canon cannot be held liable.
27
Installing and Removing the Battery and Card
Load a fully charged Battery Pack LP-E10 into the camera. You can use an SD,
SDHC, or SDXC memory card (sold separately) with the camera. The captured
images are recorded onto the card.
Make sure the card’s write-protect switch is set upward to enable writing and
erasing.
Installing the Battery and Card
1 Open the cover. Slide the lever as shown by the arrows and open the cover.
Write-protect switch
2 Insert the battery. Insert the end with the electrical contacts. Insert the
battery until it locks in place.
3 Insert the card. As shown by the illustration, face the card’s label side
toward the back of the camera and insert it until it clicks in place.
4 Close the cover. Press the cover until it snaps shut. When you set the power switch to <1>, the number of possible shots (p.32) will be displayed on the LCD monitor.
28
Installing and Removing the Battery and Card
After opening the card slot/battery compartment cover, be careful not to
forcefully swing it back further. Otherwise, the hinge may break.
The number of possible shots depends on the remaining capacity of the card,
image-recording quality, ISO speed, etc.
Setting [z1: Release shutter without card] to [Disable] will prevent you from
shooting without a card inserted.
Removing the Battery and Card
1 Set the power switch to <2> (p.31).
2 Open the cover. Make sure the access lamp is off, then open the cover. If
[Recording…] is displayed, close the cover.
3 Remove the battery. Press the battery lock lever as shown by the arrow and
remove the battery. To prevent short circuiting of the electrical contacts, be
sure to attach the provided protective cover (p.26) to the battery.
4 Remove the card. Gently push in the card, then let go to eject it. Pull the
card straight out.
5 Close the cover. Press the cover until it snaps shut.
29
Installing and Removing the Battery and Card
When the access lamp is lit or blinking, it indicates that images are being
written to, read from, or erased from the card, or data is being transferred.
Do not open the card slot/battery compartment cover. Also, never do any of the
following while the access lamp is lit or blinking. Otherwise, it can damage
the image data, card, or camera. · Removing the card. · Removing the battery.
· Shaking or banging the camera around. · Unplugging and connecting a power
cord (when household power outlet accessories (sold separately) are used).
If the card already contains recorded images, the image number may not start
from 0001.
If a card-related error message is displayed on the LCD monitor, remove and
reinsert the card. If the error persists, use a different card. If you can
transfer all the images on the card to a computer, transfer all the images and
then format the card with the camera (p.44). The card may then return to
normal.
Do not touch the card’s contacts with your fingers or metal objects. Do not
expose the contacts to dust or water. If a smudge adheres to the contacts,
contact failure may result.
Multimedia cards (MMC) cannot be used (card error will be displayed).
30
Turning on the Power
If you turn on the power and the date/time/zone setting screen appears, see
page 33 to set the date/time/zone.
Turning on the Power
z Battery Level Indicator
When the power is turned on, the battery level will be indicated in one of the
four levels.
z : Battery level is sufficient. x : Battery level is low, but the
camera can still be used. c : Battery will be exhausted soon.
(Blinks) n : Recharge the battery.
Number of Possible Shots
(Approx. number of shots)
Temperature
Room Temperature Low Temperatures
(23°C / 73°F)
(0°C / 32°F)
No Flash
600
580
50% Flash Use
500
410
The figures above are based on a fully-charged Battery Pack LP-E10, no Live
View shooting, and CIPA (Camera & Imaging Products Association) testing
standards.
Doing any of the following will exhaust the battery faster: · Pressing the
shutter button halfway for a prolonged period. · Activating the AF frequently
without taking a picture. · Using the lens Image Stabilizer. · Using the LCD
monitor frequently.
The number of possible shots may decrease depending on the actual shooting
conditions.
The lens operation is powered by the camera’s battery. Some lenses may exhaust
the battery faster than others.
For the number of possible shots with Live View shooting, see page 71.
32
3 Setting the Date, Time, and Zone
When you turn on the power for the first time or if the date/time/zone have
been reset, the date/time/zone setting screen will appear. Follow the steps
below to set the time zone first. Set the camera to the time zone in which you
currently live so that, when you travel, you can simply change the setting to
the correct time zone for your destination, and the camera will automatically
adjust the date/time. Note that the date/time appended to recorded images will
be based on this date/time setting. Be sure to set the correct date/time.
1 Display the menu screen. Press the
2 Under the [52] tab, select [Date/ Time/Zone]. Press the
3 Set the time zone. [London] is set by default. Press the
The menu setting procedure is explained on pages 42-43. In step 3, the time
displayed on the upper right of the screen is the time
difference compared with Coordinated Universal Time (UTC). If you do not see
your time zone, set the time zone while referring to the difference with UTC.
33
3 Setting the Date, Time, and Zone
4 Set the date and time. Press the
3 Selecting the Interface Language
1 Display the menu screen. Press the
2 Under the [52] tab, select [LanguageK]. Press the
3 Set the desired language. Press the
35
Attaching and Detaching a Lens
The camera is compatible with all Canon EF and EF-S lenses. The camera cannot
be used with EF-M lenses.
Attaching a Lens
1 Remove the caps. Remove the rear lens cap and the body cap by turning them as shown by the arrows.
White index
2 Attach the lens. Align the lens’s red or white index with the camera’s index matching the same color. Turn the lens as shown by the arrow until it clicks in place.
Red index
3 Set the lens’s focus mode switch to
4 Remove the front lens cap.
Minimizing Dust When changing lenses, do it quickly in a place with minimal
dust. When storing the camera without a lens attached, be sure to attach the
body cap to the camera. Remove dust on the body cap before attaching it.
36
Attaching and Detaching a Lens
Zooming
Turn the zoom ring on the lens with your fingers.
If you want to zoom, do it before focusing. Turning the zoom ring after
achieving focus may throw off the focus.
Detaching the Lens
While pressing the lens release button, turn the lens as shown by the arrow.
Turn the lens until it stops, then detach it.
Attach the rear lens cap to the detached lens.
Do not look at the sun directly through any lens. Doing so may cause loss of
vision.
When attaching or detaching a lens, set the camera’s power switch to <2>.
If the front part (focusing ring) of the lens rotates during autofocusing, do
not touch the rotating part.
During viewfinder shooting or Live View shooting, if you use a TS-E lens
(except the TS-E17mm f/4L or TS-E24mm f/3.5L II) and shift or tilt the lens or
use an Extension Tube, the standard exposure may not be obtained or the
exposure may be irregular.
Angle of View Since the image sensor size is smaller than the 35mm film format, the angle of view of an attached lens will be equivalent to that of a lens with approx. 1.6x of the focal length indicated.
Image sensor size (Approx.) (22.3 x 14.9 mm / 0.88 x 0.59 in.) 35mm film size
(36 x 24 mm / 1.42 x 0.94 in.)
37
Basic Operation
Adjusting the Viewfinder Clarity Turn the dioptric adjustment knob.
Turn the knob left or right so that the AF points (nine boxes) in the
viewfinder look the sharpest.
If the knob is difficult to turn, remove the eyecup.
If the camera dioptric adjustment still cannot provide a sharp viewfinder
image, using E-series Dioptric Adjustment Lenses (sold separately) is
recommended.
Holding the Camera
To obtain sharp images, hold the camera still to minimize camera shake.
Horizontal shooting
Vertical shooting
1. Wrap your right hand around the camera grip firmly. 2. Hold the lens bottom with your left hand. 3. Rest your hand’s right index finger lightly on the shutter button. 4. Press your arms and elbows lightly against the front of your body. 5. To maintain a stable stance, place one foot slightly ahead of the other. 6. Press the camera against your face and look through the viewfinder.
To shoot while looking at the LCD monitor, see page 69.
38
Basic Operation
Shutter Button
The shutter button has two steps. You can press the shutter button halfway.
Then you can further press the shutter button completely.
Pressing Halfway
This activates autofocusing and the automatic exposure system that sets the
shutter speed and aperture. The exposure setting (shutter speed and aperture)
is displayed in the viewfinder (0). While you press the shutter button
halfway, the LCD monitor will turn off.
Pressing Completely
This releases the shutter and takes the picture.
Preventing Camera Shake Hand-held camera movement during the moment of
exposure is called camera shake. It can cause blurred pictures. To prevent
camera shake, note the following: · Hold and steady the camera as shown on the
preceding page. · Press the shutter button halfway to autofocus, then slowly
press the
shutter button completely.
If you press the shutter button completely without pressing it halfway first,
or if you press the shutter button halfway and then press it completely
immediately, the camera will take a moment before it takes the picture.
Even during menu display, image playback, or image recording, you can
instantly go back to shooting-ready by pressing the shutter button halfway.
39
Q Quick Control for Shooting Functions
You can directly select and set the shooting functions displayed on the LCD
monitor. This is called Quick Control.
1 Press the button. The Quick Control screen will appear (7).
Basic Zone modes
2 Set the desired function. Press the cross keys to select a function. The
settings of the selected function and Feature guide (p.47) will appear. Turn
the <6> dial to change the setting. You can also select from a list by
selecting a function and pressing <0>.
Creative Zone modes
3 Take the picture. Press the shutter button completely to take the picture.
The captured image will be displayed.
For the functions settable in Basic Zone modes and their setting procedures,
see page 66.
40
Q Quick Control for Shooting Functions
Sample Quick Control Screen
Shutter speed Shooting mode* (p.23)
Exposure compensation/ AEB setting
Picture Style AF operation White balance
Aperture Highlight tone priority* ISO speed
Flash exposure compensation Raise built-in flash Auto Lighting Optimizer
Image-recording quality
Drive/self-timer
Metering mode
Functions marked with an asterisk * cannot be set with the Quick
Control. When you select and press <0>, the built-in flash will be raised.
Function Setting Screen
<0>Select the desired function and press <0>. The function’s setting screen
will appear. Press the
41
3 Menu Operations
You can set various settings with the menus such as the imagerecording
quality, date and time, etc.
LCD monitor
cross keys
Menu Screen
The menu tabs and items displayed will differ depending on the shooting mode.
Basic Zone modes
Movie shooting mode
Creative Zone modes 3Playback
zShooting
Tab
Menu items
5Set-up 9My Menu
Menu settings
42
3 Menu Operations
Menu Setting Procedure
1 Display the menu screen. Press the
2 Select a tab. Press the
3 Select the desired item. Press the
4 Select the setting. Press the
3 Formatting the Card
If the card is new or was previously formatted by another camera or computer,
format the card with this camera.
When the card is formatted, all images and data on the card will be erased.
Even protected images will be erased, so make sure there is nothing you need
to keep. If necessary, transfer the images and data to a computer, etc.,
before formatting the card.
1 Select [Format card]. Under the [51] tab, select [Format card], then press
44
3 Formatting the Card
Format the card in the following cases:
The card is new. The card was formatted by a different camera or a computer.
The card is full with images or data. A card-related error is displayed.
Low-level Formatting
Perform low-level formatting if the card’s recording or reading speed seems
slow or if you want to totally erase data on the card.
Since low-level formatting will format all recordable sectors on the card, the
formatting will take slightly longer than normal formatting.
You can stop the low-level formatting by selecting [Cancel]. Even in this
case, normal formatting will be completed and you can use the card as usual.
When the card is formatted or data is erased, only the file management
information is changed. The actual data is not completely erased. Be aware of
this when selling or discarding the card. When discarding the card, execute
low-level formatting or destroy the card physically to prevent the personal
data from being leaked.
Before using a new Eye-Fi card, the software on the card must be installed on
your computer. Then format the card with the camera.
The card capacity displayed on the card format screen may be smaller than the
capacity indicated on the card.
This device incorporates exFAT technology licensed from Microsoft.
45
Switching the LCD Monitor Display
The LCD monitor can display the shooting settings screen, menu screen,
captured images, etc.
Shooting Function Settings
When you turn on the power, the shooting settings will be displayed.
When you press the shutter button halfway, the display will turn off. And when
you let go of the shutter button, the display will turn on.
You can also turn off the display by pressing the button. Press the button
again to turn on the display.
Menu Functions
Captured Image
Appears when you press the
Appears when you press the
You can set [52: LCD off/on btn] so that the shooting settings display does
not keep turning off and on.
Even when the menu screen or captured image is displayed, pressing the shutter
button will enable you to shoot immediately.
46
Feature Guide
The Feature guide appears when you change the shooting mode or set a shooting
function, Live View shooting, movie shooting, or Quick Control for playback,
and displays a brief description of that mode, function or option. It also
displays a description when you select a function or option with the Quick
Control. The Feature guide turns off when you further proceed with any
operation.
Shooting mode (Sample)
Quick Control (Sample)
Shooting settings
Live View shooting
Playback
3 Disabling the Feature Guide
Select [Feature guide].
Under the [52] tab, select [Feature guide], then press <0>.
Select [Disable], then press <0>.
47
MEMO
48
2
Basic Shooting and Image Playback
This chapter explains how to use the Basic Zone modes on the Mode Dial for
best results and how to play back images.
With Basic Zone modes, all you do is point and shoot while the camera sets
everything automatically (p.67). Also, to prevent botched pictures due to
mistaken operations, advanced shooting function settings cannot be changed.
Basic Zone
Auto Lighting Optimizer
In Basic Zone modes, the Auto Lighting Optimizer will adjust the image
automatically to obtain the optimum brightness and contrast. It is also
enabled by default in Creative Zone modes.
49
A Fully Automatic Shooting (Scene Intelligent Auto)
is a fully automatic mode. The camera analyzes the scene and sets the
optimum settings automatically. It also adjusts focus automatically by
detecting whether the subject is still or moving (p.53).
1 Set the Mode Dial to .
AF point
2 Aim any AF point over the subject. All the AF points will be used to focus,
and the camera will focus on the closest object. Aiming the center AF point
over the subject will make focusing easier.
3 Focus on the subject. Press the shutter button halfway. The lens focusing
ring will rotate to focus. The dot inside the AF point achieving focus flashes
briefly in red. At the same time, the beeper will sound and the focus
indicator
Focus indicator
50
A Fully Automatic Shooting (Scene Intelligent Auto)
4 Take the picture. Press the shutter button completely to take the picture.
The captured image will be displayed for approx. 2 sec. on the LCD monitor.
After you finish shooting, push down the built-in flash with your fingers.
The mode makes the colors look more impressive in nature, outdoor, and
sunset scenes. If you did not obtain the desired color tones, change the mode
to a Creative Zone mode and select a Picture Style other than
FAQ
The focus indicator
Multiple AF points flash simultaneously. This indicates that focus is achieved
at all those AF points. When the AF point covering the desired subject
flashes, take the picture.
The beeper continues to beep softly. (The focus indicator
Pressing the shutter button halfway does not focus on the subject. If the
focus mode switch on the lens is set to
51
A Fully Automatic Shooting (Scene Intelligent Auto)
The flash fired even though it was daylight. For a backlit subject, the flash
may fire to help lighten the subject’s dark areas. If you do not want the
flash to fire, use the Flash off mode (p.55). Other than the flash setting,
the camera will shoot with the same settings as with .
The flash fired and the picture came out extremely bright. Move further away
from the subject and shoot. When shooting flash photography, if the subject is
too close to the camera, the picture may come out extremely bright
(overexposure).
In low light, the built-in flash fired a series of flashes. Pressing the
shutter button halfway may trigger the built-in flash to fire a series of
flashes to assist autofocusing. This is called the AFassist beam. Its
effective range is approx. 4 meters / 13.1 feet.
When flash was used, the bottom part of the picture came out unnaturally dark.
The shadow of the lens barrel was captured in the picture because the subject
was too close to the camera. Move further away from the subject and shoot. If
a hood is attached to the lens, remove it before taking the flash picture.
52
A Full Auto Techniques (Scene Intelligent Auto)
Recomposing the Shot
Depending on the scene, position the subject toward the left or right to
create a balanced background and good perspective. In the mode, pressing
the shutter button halfway to focus on a still subject will lock the focus on
that subject. Recompose the shot while keeping the shutter button pressed
halfway, and then press the shutter button completely to take the picture.
This is called “focus lock”. Focus lock is also possible in other Basic Zone
modes (except <5>).
Shooting a Moving Subject
53
A Full Auto Techniques (Scene Intelligent Auto)
A Live View Shooting
You can shoot while viewing the image on the LCD monitor. This is called “Live
View shooting”. For details, see page 69.
1 Display the Live View image on the LCD monitor. Press the button. The
Live View image will appear on the LCD monitor.
2 Focus on the subject. Aim the center AF point < > on the subject. Press the
shutter button halfway to focus. When focus is achieved, the AF point will
turn green and the beeper will sound. If necessary, the built-in flash will be
raised automatically.
3 Take the picture. Press the shutter button completely. The picture is taken
and the captured image is displayed on the LCD monitor. When the playback
display ends, the camera will return to Live View shooting automatically.
Press the button to exit the Live View shooting.
54
7 Disabling Flash
The camera analyzes the scene and sets the optimum settings automatically. In
places where flash photography is prohibited such as in a museum or an
aquarium, use the <7> (Flash Off) mode. This mode is also effective for
capturing the particular ambience of a scene, such as candlelight scenes.
Shooting Tips
Prevent camera shake if the numeric display (shutter speed) in the viewfinder
blinks. Under low light when camera shake is prone to occur, the viewfinder’s
shutter speed display will blink. Hold the camera steady or use a tripod. When
using a zoom lens, use a wide angle to reduce blur caused by camera shake even
with handheld shooting.
When shooting portraits without flash. In low-light conditions, tell the
subject to keep still until the picture is taken. Any movement by the subject
during shooting may result in the subject being blurred in the picture.
55
C Creative Auto Shooting
In the
- CA stands for Creative Auto.
1 Set the Mode Dial to.
2 Press thebutton (7). The Quick Control screen will appear.
3 Set the desired function. Press thecross keys to select a function. The settings of the selected function and Feature guide (p.47) will appear. For the setting procedure and details on each function, see pages 57-58.
4 Take the picture. Press the shutter button completely to take the picture.
56
C Creative Auto Shooting
Shutter speed
(1)
Aperture
(2)
ISO speed
(3)
(4)
Battery level Image-recording quality
Possible shots
Pressing the button enables you to set the following:
(1) Ambience-based shots You can select and shoot with the ambience you want
to convey in your images. Press the
(2) Blurring/sharpening the background
If you move the index mark toward the left, the background will look more
blurred. If you move it toward the right, the background will look more in
focus. If you want to blur the background, see “Shooting Portraits” on page
59. Press the
57
C Creative Auto Shooting
(3) Drive/self-timer: Press <0> and set it with the Self-timer:
Continuous: Press the
(4) Built-in flash firing: Press <0> and set it with the
When using , see “Disabling Flash” on page 55.
58
2 Shooting Portraits
The <2> (Portrait) mode blurs the background to make the human subject stand
out. It also makes skin tones and hair look softer.
Shooting Tips
Select the location where the distance between the subject and the background
is the farthest. The further the distance between the subject and background,
the more blurred the background will look. The subject will also stand out
better against an uncluttered dark background.
Use a telephoto lens. If you have a zoom lens, use the telephoto end to fill
the frame with the subject from the waist up. Move in closer if necessary.
Focus on the face. Check that the AF point covering the face lights up. For
close-ups of the face, focus on the eyes.
If you hold down the shutter button, you can shoot continuously (max. approx.
3.0 shots/sec.) to capture changes in the subject’s facial expression and
pose.
If necessary, the built-in flash will fire automatically.
59
3 Shooting Landscapes
Use the <3> (Landscape) mode for wide scenery or to have everything in focus
from near to far. For vivid blues and greens, and very sharp and crisp images.
Shooting Tips
With a zoom lens, use the wide-angle end. When using the wide-angle end of a
zoom lens, objects near and far will be in focus better than at the telephoto
end. It also adds breadth to landscapes.
When shooting night scenes. Since the built-in flash will be disabled, this
mode <3> is also good for night scenes. Use a tripod to prevent camera shake.
If you want to shoot a person against a night scene, set the Mode Dial to <6>
(Night Portrait) and use a tripod (p.64).
The built-in flash will not fire even in backlit or low-light conditions. If
you are using an external Speedlite, the Speedlite will fire.
60
4 Shooting Close-ups
When you want to shoot flowers or small things up close, use the <4> (Close-
up) mode. To make small things appear much larger, use a macro lens (sold
separately).
Shooting Tips
Use a simple background. A simple background makes small objects such as
flowers stand out better.
Move in as close as possible to the subject. Check the lens for its minimum
focusing distance. Some lenses have indications such as <MACRO 0.25m/0.8ft> on
them. The lens minimum focusing distance is measured from the
With a zoom lens, use the telephoto end. If you have a zoom lens, using the
telephoto end will make the subject look larger.
If necessary, the built-in flash will fire automatically.
61
5 Shooting Moving Subjects
Use the <5> (Sports) mode to shoot a moving subject, such as a running person
or a moving vehicle.
Shooting Tips
Use a telephoto lens. The use of a telephoto lens is recommended for shooting
from a distance.
Use the center AF point to focus. Aim the center AF point over the subject,
then press the shutter button halfway to autofocus. During autofocusing, the
beeper will continue beeping softly. If focus cannot be achieved, the focus
indicator
The built-in flash will not fire even in backlit or low-light conditions.
Under low light when camera shake tends to occur, the viewfinder’s
shutter speed display on the bottom left will blink. Hold the camera steady
and shoot. If you are using an external Speedlite, the Speedlite will fire.
62
P Shooting Food
When shooting food, use
(Food). The photo will look bright and appetizing.
Also, depending on the light source, the reddish tinge will be suppressed in
the pictures taken under tungsten lights, etc.
Shooting Tips
Change the color tone. You can change [Color tone]. To increase the food’s
reddish tinge, set it toward [Warm]. Set it toward [Cool] if it looks too red.
Avoid using flash. If you use flash, the light may reflect off the dish or
food and results in unnatural shadows. By default, (Built-in flash off) is
set. Try to prevent camera shake when shooting in low-light conditions.
Since this mode lets you shoot the food in appetizing color tones, human
subjects may be shot in an unsuitable skin tone.
The warm color cast of subjects may fade. When multiple light sources are
included on the screen, the warm color
cast of the picture may not be lessened. If you use flash, the [Color tone]
setting will switch to the standard
setting.
63
6 Shooting Night Portraits
To shoot people at night and obtain a natural-looking night scene in the
background, use the <6> (Night Portrait) mode. Using a tripod is recommended.
Shooting Tips
Use a wide-angle lens and a tripod. When using a zoom lens, use the wide-angle
end to obtain a wide night view. Also, use a tripod to prevent camera shake.
Check the subject’s brightness. Under low light, the built-in flash will fire
automatically to obtain a good exposure of the subject. It is recommended to
play back the image after shooting to check the image brightness. If the
subject looks dark, move nearer and shoot again.
Also shoot with the (Scene Intelligent Auto) mode. Since camera shake is
prone to occur with night shots, shooting also in the mode is recommended.
64
6 Shooting Night Portraits
During Live View shooting, it may be difficult to focus on dots of light such
as in a night scene. In such a case, it is recommended that you set the AF
method to [Quick mode] and shoot. If it is still difficult to focus, set the
lens’s focus mode switch to
Tell the subject to keep still even after the flash fires. If you use the
self-timer together with flash, the self-timer lamp will light
up briefly after the picture is taken.
65
Q Quick Control
In Basic Zone modes, when the shooting function settings are displayed, you
can press the button to display the Quick Control
screen. The tables on the next page show the functions that can be set
with the Quick Control screen in each Basic Zone mode.
Example: Portrait mode
1 Set the Mode Dial to a Basic Zone mode.
2 Press the button (7). The Quick Control screen will appear.
3 Set the desired function. Press the cross keys to select a
function. (This step is not necessary in the A/7 mode.) The settings of the
selected function
and Feature guide (p.47) will appear. Press the
66
Q Quick Control
Settable Functions in Basic Zone Modes
o: Default setting k: User selectable
: Not selectable
Function
A7C 2 3 4 5 P 6
u: Single shooting o o o
oo
oo
Drive/ self-timer
i: Continuous shooting
j: 10 sec.
ko
o
kkkkkkkkk
q: Continuous shooting*
kkkkkkkkk
a: Automatic firing o
oo
o
o
Built-in flash D: Flash on (Fires at
k
k
firing
all times)
b: Flash off
ok
o
oo
Ambience-based shots
kkkkkkk
Light/scene-based shots
kkkk
Blurring/sharpening the background
k
(p.57)
Color tone (p.63)
k
- Use the
keys to set the number of continuous shots.
If you change the shooting mode or set the power switch to <2>, all the
functions will revert to the default settings (except the self-timer).
67
x Image Playback
The easiest way to play back images is explained below. For more details on
the playback procedure, see page 93.
1 Play back the image. Press the
2 Select an image. To view images starting with the last captured image, press
the
Basic information display
Basic information + Image quality/Playback number
Histogram
Shooting information display
3 Exit the image playback. Press the
68
3
Shooting with the LCD Monitor (Live View Shooting)
You can shoot while viewing the picture on the camera’s LCD monitor. This is
called “Live View shooting”.
Live View shooting is effective for still subjects which do not move. If you
handhold the camera and shoot while viewing the LCD monitor, camera shake can
cause blurred images. Using a tripod is recommended.
Remote Live View Shooting
With EOS Utility (EOS software, p.102) installed on your computer, you can
connect the camera to the computer and shoot remotely while viewing the
computer screen. For details, refer to the EOS Utility Instruction Manual.
69
A Shooting with the LCD Monitor
1 Display the Live View image. Press the button. The Live View image will
appear on the LCD monitor. The Live View image will closely reflect the
brightness level of the actual image you capture.
2 Focus on the subject. When you press the shutter button halfway, the camera
will focus with the current AF method (p.73).
3 Take the picture. Press the shutter button completely. The picture is taken
and the captured image is displayed on the LCD monitor. When the playback
display ends, the camera will return to Live View shooting automatically.
Press the button to exit the Live View shooting.
The image’s field of view is approx. 100% (with the image-recording quality
set to JPEG 73).
During Live View shooting, the camera will shoot with One-Shot AF in all
shooting modes.
The metering mode will be fixed to evaluative metering for Live View shooting.
In Creative Zone modes, you can check the depth of field by setting [9: Assign
SET button] under [53: Custom Functions (C.Fn)] to [4: Depth-of-field preview]
and pressing <0>.
During continuous shooting, the exposure set for the first shot will also be
applied to the subsequent shots.
70
A Shooting with the LCD Monitor
Enabling Live View Shooting
Set [Live View shoot.] to [Enable]. In Basic Zone modes, the Live View menu
options will be displayed under [z2], and in Creative Zone modes, they will be
displayed under [z4].
Number of Possible Shots with Live View Shooting (Approx. number of shots)
Temperature
Room Temperature (23°C / 73°F)
Low Temperatures (0°C / 32°F)
No Flash
190
180
50% Flash Use
180
170
The figures above are based on a fully-charged Battery Pack LP-E10 and CIPA
(Camera & Imaging Products Association) testing standards.
With a fully-charged Battery Pack LP-E10, continuous Live View shooting is
possible for approx. 1 hr. 25 min. at room temperature (23°C / 73°F).
Do not point the camera toward an intense light source, such as the sun or an
intense artificial light source. Doing so may damage the image sensor or the
camera’s internal components.
General Live View Shooting Cautions are on pages 81-82.
When flash is used, there will be two shutter sounds, but only one shot will
be taken. Also, the time it takes to capture an image after you press the
shutter button completely will be slightly longer than with viewfinder
shooting.
If the camera is not operated for a prolonged period, the power will turn off
automatically after the time set in [51: Auto power off]. If [51: Auto power
off] is set to [Disable], Live View shooting will end automatically after
approx. 30 min. (camera power remains on).
With an HDMI cable (sold separately), you can display the Live View image on a
TV set. Note that no sound will be output.
71
A Shooting with the LCD Monitor
Information Display
Each time you press the button, the information display will change.
AF method · d : FlexiZone – Single · c : u Live mode · f : Quick mode
AF point (Quick mode) Magnifying frame
Shooting mode
Histogram display
Drive/self-timer
White balance
Auto Lighting Optimizer
Image-recording quality
AE lock
D Flash-ready b Flash Off e High-speed sync
y Flash exposure compensation
0 External flash exposure compensation
Shutter speed
Picture Style
Temperature warning FEB AEB Exposure simulation Battery level
Highlight tone priority
ISO speed GPS connection indicator
Possible shots
Eye-Fi card transmission status
Exposure level indicator/AEB range
Aperture
When
If
If flash is used or bulb exposure is set, the
72
Using AF to Focus (AF Method)
Selecting the AF Method
You can select an AF method to suit the shooting conditions and your subject.
The following AF methods are provided: [FlexiZone – Single], [u Live mode]
(face detection, p.74), and [Quick mode] (p.79). If you want to achieve
precise focus, set the lens’s focus mode switch to
Select the AF method.
Under the [z4] tab, select [AF method]. (In Basic Zone modes, it is under the
[z2] tab.)
Select the desired AF method, then press <0>.
While the Live View image is displayed, you can also press the button to
select the AF method with the Quick Control.
FlexiZone – Single: d
The image sensor is used to focus. Although AF is possible with the Live View
image displayed, the AF operation will take longer than with the Quick mode.
Also, achieving focus may be more difficult than with the Quick mode.
1 Display the Live View image. Press the button. The Live View image will
appear on
the LCD monitor. The AF point < > will appear.
AF point
2 Move the AF point. Press the cross keys to move the AF point to where
you want to
focus. (It cannot be moved to the
edge of the screen.) Press <0> to return the AF point to the center. (If
C.Fn-9 is set,
hold down the <O/L> button and press <0>.)
73
Using AF to Focus (AF Method)
3 Focus on the subject. Aim the AF point over the subject and press the
shutter button halfway. When focus is achieved, the AF point will turn green
and the beeper will sound. If focus is not achieved, the AF point will turn
orange.
4 Take the picture. Check the focus and exposure, then press the shutter
button completely to take the picture (p.70).
u (Face detection) Live Mode: c frame will appear on
the face for focusing. If multiple faces are detected, 74 Using AF to Focus (AF Method) frame. When focus is achieved, the AF
point will turn green and the beeper will sound. If focus is not achieved, the
AF point will turn orange. If a face cannot be detected, the AF point < > will
be displayed and AF will be executed at the center. will be displayed. may cover only a part of the face. will be grayed out. Then if you press the shutter button halfway, the
center AF point < > will be used to focus. Using AF to Focus (AF Method) 76 Using AF to Focus (AF Method) 77 Using AF to Focus (AF Method) 78 Using AF to Focus (AF Method) Quick Mode: f AF point 1 Display the Live View image. Press the button. The Live View image will
appear on the LCD monitor. The small boxes on the screen are the AF points,
and the larger box is the magnifying frame. Magnifying frame 2 Select the AF point.N Press the 79 Using AF to Focus (AF Method) General Live View Shooting Cautions 81 General Live View Shooting Cautions 4 k Shooting Movies Autoexposure Shooting 1 Set the Mode Dial to 2 Focus on the subject. Before shooting a movie, focus with AF or manual focus
(p.73-80). When you press the shutter button halfway, the camera will focus
with the current AF method. Recording movie 3 Shoot the movie. Press the button to start Built-in microphone 84 k Shooting Movies 85 k Shooting Movies Information Display AF method · d : FlexiZone – Single · c : u Live mode · f : Quick mode Picture Style Movie shooting mode Movie shooting remaining time / Elapsed time AF point (Quick mode) White balance Auto Lighting Optimizer Recording movie Aperture Exposure level indicator ISO speed GPS connection indicator Video snapshot shooting time Eye-Fi card transmission status If there is no card in the camera, the movie shooting remaining time will be
displayed in red. k Shooting Movies 87 k Shooting Movies 88 3 Setting the Movie Recording Size Image Size [1920×1080] (A) : Full High-Definition (Full HD) recording quality.
The aspect ratio is 16:9. [1280×720] (B) : High-Definition (HD) recording
quality. The aspect ratio is 16:9. [640×480] (C) : Standard-definition
recording quality. The aspect ratio is 4:3. Frame Rate (fps: frame per second) 6/8 : For areas where the TV system is NTSC (North America, Japan, South Korea, Mexico, etc.). 5/7 : For areas where the TV system is PAL (Europe, Russia, China, Australia, etc.). 4 : Mainly for motion pictures. 89 3 Setting the Movie Recording Size Total Movie Recording Time and File Size Per Minute (Approx.) Movie recording Size Total Recording Time on Card 4 GB 16 GB 64 GB File Size 6 [1920×1080] 5 4 11 min. 44 min. 2 hr. 59 min. 340 MB/min. 8 [1280×720] 7 11 min. 44 min. 2 hr. 59 min. 340 MB/min. 6 [640×480] 5 42 min. 2 hr. 50 min. 11 hr. 20 min. 90 MB/min. Movie Files Exceeding 4 GB Due to the file system, movie shooting will stop
automatically if the file size of a single movie clip reaches 4 GB. You can
start shooting a movie again by pressing the button. (The movie will be
recorded as a new movie file.) An increase of the camera’s internal temperature may cause movie shooting to
stop before the maximum recording time shown in the table above (p.91). General Movie Shooting Cautions 91 General Movie Shooting Cautions Recording and Image Quality If you use a card with a slow writing speed, a five-level indicator may appear on the right of the screen during movie shooting. It indicates how much data has not yet been written to the card (remaining capacity of the internal buffer memory). The slower the card, the faster the indicator will climb upward. If the indicator becomes full, movie shooting will stop automatically. If the card has a fast writing speed, the indicator
will either Indicator not appear or the level (if displayed) will hardly go upward. First, shoot a few test movies to see if the card can write fast enough. Playback and TV Connection If you connect the camera to a TV set with an HDMI
cable and shoot a 92 5 x Searching for Images Quickly 2 Switch to the index display. Press the 3 Select an image. Press the 94 u/y Magnified View k Playing Back Movies Speaker 2 Select a movie. Press the k Playing Back Movies Movie Playback Panel Operation Playback Description 2 Exit 7 Play Returns to the single-image display. 5 First frame 3 Previous frame Displays the movie’s first frame. 6 Next frame Each time you press <0>, the movie will play frameby-frame. If you hold down 4 Last frame Displays the movie’s last frame. X Edit Displays the editing screen. v Background music* Plays back a movie with the selected background music. Playback position mm’ ss” Playback time (minutes:seconds) 9 Volume Turn the <6> dial to adjust the volume of the built-in speaker (p.96). The camera may not be able to play back movies shot with another camera. L Erasing Images B Shooting Information Display Sample Still Photo Taken in a Creative Zone Mode Exposure compensation amount Flash exposure compensation amount Protect images Rating Folder number – File number Metering mode Shooting mode Picture Style/Settings Playback number/ Total images recorded White balance correction File size If the image was taken by another camera, certain shooting information may not
be displayed. B Shooting Information Display Shooting mode Ambience and ambience effects Sample Movie Information Display Shooting duration Movie/Playback Shutter speed Aperture ISO speed Movie file size Movie recording size Frame rate 100 6 101 Software Start Guide 102 Software Start Guide 103 Downloading and Viewing the Software Instruction Manuals (PDF Files) 104 Downloading Images to a Computer Downloading Images to a Computer Trademarks 107 Use of genuine Canon accessories is recommended 108 Digital Camera Model DS126621 Systems 109 USA and Canada only: The Lithium ion/polymer battery that powers the product
is recyclable. Please call 1-800-8-BATTERY for information on how to recycle
this battery. 110 Index D 111 Index I Movies…………………………………….. 83 Autoexposure……………………….. 84 File size………………………………..
90 Frame rate …………………………… 89 Information display………………… 86 Manual focus
……………………….. 84 Movie recording size……………… 89 Playback ……………………………… 96
Recording time……………………… 90 112 S Index MEMO 114 EOS REBEL T6 (W) EOS 1300D (W) Introduction (CANON iMAGE GATEWAY) (3) Send images to a Web service (2) Save images to Canon Connect Station* Introduction W-3 Conventions Used in this Manual In this manual, the terms “wireless” and “wireless LAN” are used as general
terms for Wi-Fi and Canon’s original wireless functions. Icons in this Manual : Indicates the Main Dial. : Indicates the : Indicates the Setting button. (p.**) : Reference page numbers for more information. : Warnings to prevent potential problems during operation. : Supplemental information. Note that Canon cannot be held liable for any loss or damage from erroneous
wireless communication settings for using the camera. In addition, Canon
cannot be held liable for any other loss or damage caused by use of the
camera. Contents Introduction W-2 What You Can Do Using the Wireless Functions …………………… W-2 Conventions Used in
this Manual ………………………………………… W-4 1 Preparation and Basic Operation W-7 Registering a Nickname……………………………………………………… W-8 Basic Operation and Settings ……………………………………………. W-11 NFC
Function………………………………………………………………….. W-14 Preparation for Smartphones…………………………………………….. W-16 2 Easy Connection to a Smartphone W-17 Connection Method………………………………………………………….. W-18 Connecting Automatically with the NFC Function…………………. W-19 Connecting with Easy Connection ……………………………………… W-22 Operating the Camera
Using a Smartphone………………………… W-26 Reconnecting ………………………………………………………………….. W-28 Easy Image Transfer Using the NFC Function …………………….. W-30 3 Easy Connection to Connect Station W-35 Saving Images ………………………………………………………………… W-36 Wi-Fi (Wireless LAN) Precautions ……………………………………… W-39 Index
……………………………………………………………………………… W-41 For Troubleshooting guide and Specifications, refer to the Instruction Manual
downloadable from the Canon Web site. For how to download the Instruction
Manual, see page 4. MEMO W-6 1 W-7 Registering a Nickname W-8 Registering a Nickname Registering a Nickname W-10 Basic Operation and Settings W-11 Basic Operation and Settings W-12 Basic Oper
Human faces are detected and focused on with the same AF method as FlexiZone –
Single. Have the person whose picture you want to take face the camera.
1 Display the Live View image. Press the button. The Live View image will
appear on the LCD monitor.
2 Check the AF point. When a face is detected, the will be displayed.
Use the
frame over the face you want to focus on.
3 Focus on the subject. Press the shutter button halfway and the camera will
focus on the face covered by the
4 Take the picture. Check the focus and exposure, then press the shutter
button completely to take the picture (p.70).
If the subject’s face is significantly out of focus, face detection will not
be possible. If the lens enables manual focusing even while the lens’s focus
mode switch is set to
An object other than a human face may be detected as a face. Face detection
will not work if the face is very small or large in the picture,
too bright or too dark, tilted horizontally or diagonally, or partially
hidden. The
When you press <0>, the AF method will switch to [FlexiZone – Single] (p.73).
You can press the cross keys to move the AF point. Press <0> again to
return to [u(Face detection) Live Mode]. (If C.Fn-9 is set, hold down the
<O/L> button and press <0>.)
Since AF is not possible with a face detected near the edge of the picture,
the
75
Notes for [FlexiZone – Single] and [u Live mode] AF Operation Focusing will
take longer than with [Quick mode]. Even when focus is achieved, pressing the
shutter button halfway
will focus again. You cannot focus on a moving subject continuously. The image
brightness may change during and after the AF
operation. If the light source changes while the Live View image is displayed,
the screen may flicker and focusing may be difficult. If this happens, exit
Live View shooting and execute AF under the actual light source.
Magnified View
When [FlexiZone – Single] is set and you press the button, the area
covered by the AF point will be magnified. Press the shutter button halfway to
focus in the magnified view. This is effective when the camera is attached to
a tripod and you need to attain very precise focus. If focusing is difficult
in magnified view, return to the normal display and use AF. Note that the AF
speed may differ between the normal and magnified views.
If you magnify the view after focusing with [FlexiZone – Single] in the normal
view, precise focus may not be achieved.
If [u Live mode] is set, magnified view is not possible.
Shooting Conditions that Make Focusing Difficult Low-contrast subjects such as
the blue sky, solid-color flat surfaces
or when highlight or shadow details are lost. Subjects in low light. Stripes
and other patterns where there is contrast only in the
horizontal direction. Subjects with repetitive patterns (Example: Skyscraper
windows,
computer keyboards, etc.). Fine lines and subject outlines. Under a light
source whose brightness, color, or pattern keeps
changing. Night scenes or points of light. The image flickers under
fluorescent or LED lighting. Extremely small subjects. Subjects at the edge of
the picture. Strongly backlit or reflective subjects (Example: Car with a
highly
reflective body, etc.). The AF point covers both near and distant subjects
(Example:
Animal in a cage, etc.). Subjects that keep moving within the AF point and
cannot keep still
due to camera shake or subject blur. A subject approaching or moving away from
the camera. Autofocusing while the subject is very far out of focus. Soft
focus effect is applied with a soft focus lens. A special effect filter is
used. Noise (dots of light, banding, etc.) appears on the screen during AF.
If focus is not achieved with the shooting conditions on the preceding page,
set the lens’s focus mode switch to
If you use AF with any of the following lenses, using [Quick mode] is
recommended. Autofocusing with [FlexiZone – Single] or [u Live mode] may take
longer or correct focus may not be achieved. EF50mm f/1.4 USM, EF50mm f/1.8
II, EF50mm f/2.5 Compact Macro, EF100mm f/2.8 Macro USM, EF75-300mm f/4-5.6
III, EF75-300mm f/4-5.6 III USM For information on other lenses, refer to the
Canon Web site.
If you shoot a peripheral subject and it is slightly out of focus, aim the
center AF point over the subject to focus, focus again and then take the
picture.
The AF-assist beam will not be emitted. However, if an EX-series Speedlite
(sold separately) equipped with an LED light is used, the LED light will turn
on for AF-assist when necessary.
In magnified view, focusing may be difficult due to camera shake. Using a
tripod is recommended.
The dedicated AF sensor is used to focus in One-Shot AF, using the same AF
method as with viewfinder shooting. Although you can focus on the target
subject quickly, the Live View image will be interrupted momentarily during
the AF operation. You can use nine AF points to focus (automatic selection).
You can also select one AF point to focus and focus only on the area covered
by that AF point (manual selection). button (7) to
display the Quick Control screen. The settable functions will be
displayed on the left of the screen. Press the
AF point selectable. Turn the <6> dial to select the AF
point.
3 Focus on the subject. Aim the AF point over the subject and press the
shutter button halfway. The Live View image will turn off, the reflex mirror
will go back down, and AF will be executed. (No picture is taken.) When focus
is achieved, the AF point that achieved focus will turn green and the Live
View image will reappear. If focus is not achieved, the AF point will turn
orange and blink.
4 Take the picture. Check the focus and exposure, then press the shutter
button completely to take the picture (p.70).
You cannot take a picture during autofocusing. Take the picture while the Live
View image is displayed.
80
Image Quality When you shoot at high ISO speeds, noise (such as dots of light
and
banding) may become noticeable. Shooting in high temperatures may cause noise
and irregular colors in
the image. If Live View shooting is used continuously for a prolonged period,
the
camera’s internal temperature may rise, and image quality may deteriorate.
Always exit Live View shooting when you are not shooting. If you shoot a long
exposure while the camera’s internal temperature is high, image quality may
deteriorate. Exit Live View shooting and wait a few minutes before shooting
again.
White and Red
View shooting or under a high ambient temperature, a white or red icon indicates that the image quality of still
photos will deteriorate. It is recommended that you temporarily exit Live View
shooting and allow the camera to cool down before shooting again. The red or icon is
displayed.
Shooting Results If you take the picture in magnified view, the exposure may
not come out
as desired. Return to the normal view before taking the picture. In magnified
view, the shutter speed and aperture will be displayed in orange. Even if you
take the picture in magnified view, the image area for the normal veiw will be
captured. If you use a TS-E lens (except the TS-E17mm f/4L or TS-E24mm f/3.5L
II) and shift or tilt the lens or use an Extension Tube, the standard exposure
may not be obtained or an irregular exposure may result.
Live View Image Under low- or bright-light conditions, the Live View image may
not reflect
the brightness of the captured image. Even if a low ISO speed is set, noise
may be noticeable in the displayed
Live View image under low light. However, when you shoot, the image recorded
will have less noise. (The image quality of the Live View image is different
from that of the recorded image.) If the light source (illumination) within
the image changes, the screen may flicker. If this happens, exit Live View
shooting and resume Live View shooting under the actual light source. If you
point the camera in a different direction, it may throw off the Live View
image’s correct brightness momentarily. Wait until the brightness level
stabilizes before shooting. If there is a very bright light source in the
image, the bright area may appear black on the LCD monitor. However, the
actual captured image will correctly show the bright area. In low light, if
you set the [52: LCD brightness] to a bright setting, noise or irregular
colors may appear in the Live View image. However, the noise or irregular
colors will not be recorded in the captured image. When you magnify the image,
the image sharpness may look more pronounced than in the actual image.
Custom Functions During Live View shooting, some Custom Function settings will
not take
effect.
Lens and Flash During Live View shooting, focus preset for super telephoto
lenses
cannot be used. FE lock will not work when the built-in flash or an external
Speedlite is
used. Modeling flash will not work if an external Speedlite is used.
Do not hold the camera in the same position for long periods of time. Even if
the camera does not feel too hot, prolonged contact with the same body part
may cause skin redness or blistering due to low-temperature contact burns.
Using a tripod is recommended for people with circulation problems or very
sensitive skin, or when using the camera in very hot places.
82
Shooting Movies
Movie shooting is enabled by setting the Mode Dial to
For cards that can record movies, see page 5.
Full HD 1080
Full HD 1080 indicates compatibility with HighDefinition featuring 1080
vertical pixels (scanning lines).
83
Connecting the camera to a TV set is recommended to play back the movies shot.
shooting a movie. To stop movie shooting, press again. While the movie is
being shot, the [o] mark will be displayed on the upper
right of the screen. Sound will be recorded by the built-in
microphone.
General Movie Shooting Cautions are on pages 91-92. If necessary, also read
General Live View Shooting Cautions on
pages 81-82.
The ISO speed (ISO 100 – ISO 6400), shutter speed, and aperture are set
automatically.
You can press the button to lock the exposure (AE lock). The exposure
setting will be displayed for the number of seconds set with [k2: Metering
timer]. After applying AE lock during movie shooting, you can cancel it by
pressing the button. (AE lock setting is retained until you press the
button.)
By holding down the
If you shoot a movie with autoexposure, the ISO speed, shutter speed, and
aperture will not be recorded in the movie’s Exif information.
With autoexposure movie shooting, the camera will automatically turn on the
Speedlite’s LED light under low-light conditions. For details, refer to the
Speedlite’s instruction manual.
Each time you press the button, the information display will change.
Movie recording size Video snapshot
AE lock LED light Frame rate Shutter speed
Magnifying frame Temperature warning
Recording level: Manual
Battery level
Exposure mode L : Autoexposure K : Manual
exposure
Highlight tone priority
When movie shooting starts, the movie shooting remaining time will change to
the elapsed time.
86
Notes for Movie Shooting
Do not hold the camera in the same position for long periods of time. Even if
the camera does not feel too hot, prolonged contact with the same body part
may cause skin redness or blistering due to low-temperature contact burns.
Using a tripod is recommended for people with circulation problems or very
sensitive skin, or when using the camera in very hot places.
When [k1: AF w/ shutter button during k] is set to [Enable], pressing the
shutter button halfway during movie shooting will perform autofocusing.
However, the following may occur. · Focus may become far off momentarily. ·
The brightness of the recorded movie may change. · The recorded movie may be
momentarily still. · The movie may record the lens operation sound.
Do not point the camera toward an intense light source, such as the sun or an
intense artificial light source. Doing so may damage the image sensor or the
camera’s internal components.
If or
If you shoot a movie under fluorescent or LED lighting, the movie may flicker.
Shooting a few test movies is recommended where you will perform zooming
during movie shooting. Zooming during movie shooting may result in recording
of changes in exposure or mechanical sound of the lens, or images may be out
of focus.
During movie shooting, you cannot magnify the image even if you press the
button.
If you connect or disconnect the HDMI cable during movie shooting, the movie
shooting will end.
Be careful not to cover the built-in microphone (p.84) with your finger, etc.
General Movie Shooting Cautions are on pages 91-92. If necessary, also read
General Live View Shooting Cautions on
pages 81-82.
Movie-related settings are under the [k1], [k2], and [k3] tabs. A movie file
is recorded each time you shoot a movie (p.90). The movie image’s field of
view is approx. 100% (with movie recording
size set to [A]). Monaural sound is recorded by the camera’s built-in
microphone (p.84). With a fully-charged Battery Pack LP-E10, the total movie
shooting time
will be as follows: approx. 1 hr. 15 min. at room temperature (23°C/73°F), and
approx. 1 hr. 10 min. at low temperatures (0°C/32°F). During movie shooting,
focus preset for super telephoto lenses cannot be used.
Still Photo Shooting
Still photo shooting is not possible in movie shooting mode. To shoot still
photos, turn the Mode Dial to change the shooting mode.
The menu option [k2: Movie rec. size] enables you to select the movie’s image
size [x] and frame rate [9] (frames recorded per second). The 9 (frame
rate) switches automatically depending on the [k2: Video system] setting.
Movie Shooting Time Limit The maximum recording time of one movie clip is 29
min. 59 sec. If the movie shooting time reaches 29 min. 59 sec., the movie
shooting will stop automatically. You can start shooting a movie again by
pressing the button. (The movie will be recorded as a new movie file.)
90
Red
shooting or under a high ambient temperature, a red
Recording and Image Quality If the attached lens has an Image Stabilizer and
you set the Image
Stabilizer (IS) switch to <1>, the Image Stabilizer will operate at all times
even if you do not press the shutter button halfway. The Image Stabilizer
consumes battery power and may shorten the total movie shooting time. If you
use a tripod or if the Image Stabilizer is not necessary, it is recommended to
set the IS switch to <2>. The camera’s built-in microphone will also pick up
camera operation sound. If the brightness changes during autoexposure movie
shooting, the movie may freeze temporarily. In such cases, shoot movies with
manual exposure. If there is a very bright light source in the image, the
bright area may appear black on the LCD monitor. The movie will be recorded
almost exactly as it appears on the LCD monitor. In low light, noise or
irregular colors may appear in the image. The movie will be recorded almost
exactly as it appears on the LCD monitor.
movie at [1920×1080] or [1280×720], the movie being shot will be displayed in
a small size on the TV set. The movie will still be recorded in the movie-
recording size that was set. If you connect the camera to a TV set and shoot a
movie, the TV set will not output any sound during the shooting. However, the
sound will be properly recorded.
Image Playback
This chapter explains basic procedures to play back images and movies.
Images shot and saved with another device
The camera may not be able to properly display images captured with a
different camera, edited with a computer, or that have had their file names
changed.
93
H Displaying Multiple Images on One Screen (Index Display)
Search for images quickly with the index display showing four or nine images
on one screen.
1 Play back the image. When you press the
appear. The selected image is
highlighted with an orange frame. Press the
switch to the 9-image display. Pressing the button will switch
the display between nine images, four
images and one image displayed. cross keys to move
the orange frame to select an image. Turning the <6> dial will display
image(s) on the next or previous screen. Press <0> in the index display to
display the selected image in the
single-image display.
You can magnify a captured image by approx. 1.5x to 10x on the LCD monitor.
1 Magnify the image. Press the button during image playback. The image
will be magnified. If you hold down the button, the image will be
magnified until it reaches the maximum magnification. Press the
Magnified area position
2 Scroll around the image. Use the cross keys to scroll around the
magnified image. To exit magnified view, press the
In magnified view, you can turn the <6> dial to view another image at the same
magnification.
The image cannot be magnified during the image review immediately after
shooting.
A movie cannot be magnified.
95
1 Play back the image. Press the
96
3 In the single-image display, press <0>. The movie playback panel will appear
at the bottom of the screen.
4 Play back the movie. Select [7] (Play), then press <0>. The movie will start
playing back. You can pause the movie playback by pressing <0>. You can adjust
the built-in speaker’s volume by turning the <6> dial even during movie
playback. For more details on the playback procedure, see the next page.
8 Slow motion
Pressing <0> toggles between play and stop.
Adjust the slow motion speed by pressing the
Each time you press <0>, the previous frame is displayed. If you hold down
With a fully-charged Battery Pack LP-E10, the continuous playback time at room
temperature (23°C / 73°F) will be as follows: Approx. 2 hr. 20 min.
During the single-image display, you can press the button to change the
display format (p.100).
If you connect the camera to a TV set to play back a movie, adjust the sound
volume with the TV set. (Turning the <6> dial will not change the sound
volume.)
97
You can either select and erase unnecessary images one by one or erase them in
one batch. Protected images will not be erased.
Once an image is erased, it cannot be recovered. Make sure you no longer need
the image before erasing it. To prevent important images from being erased
accidentally, protect them. Erasing a 1+73 image will erase both the RAW and
JPEG images.
Erasing a Single Image
1 Play back the image to be erased. 2 Press the
The Erase menu will appear.
3 Erase the image. Select [Erase], then press <0>. The image displayed will be
erased.
To erase all images including protected images, format the card (p.44).
98
Aperture
Shutter speed
Histogram (Brightness/RGB)
White balance Image-recording quality
ISO speed Highlight tone priority
Color space Shooting date and time
Eye-Fi transfer
change to . Images taken with flash without any flash exposure
compensation are marked
with the <0> icon. Images taken with flash exposure compensation are marked
with the
It may not be possible to play back images taken with this camera on other
cameras.
99
Sample Still Photo Taken in a Basic Zone Mode
Lighting or scene
Movie shooting mode Recording format
set manually) will be displayed. * The
Software Start Guide / Downloading Images to a Computer
This chapter explains the following:
Overview of the software for EOS DIGITAL cameras How to download and install
the software on a computer How to download and view the Software Instruction
Manuals (PDF files) How to download images from the camera to a computer
Software Overview
This section explains an overview of various software applications for EOS
DIGITAL cameras. Internet connection is required to download and install the
software. Download and installation are not possible in environments with no
Internet connection.
EOS Utility
With the camera connected to a computer, EOS Utility enables you to transfer
still photos and movies shot with the camera to the computer. You can also use
this software to set various camera settings and shoot remotely from the
computer connected to the camera. Also, you can copy background music tracks,
such as EOS Sample Music*, to the card.
Digital Photo Professional
This software is recommended for users who shoot RAW images. You can view,
edit, and print RAW and JPEG images.
Picture Style Editor
You can edit Picture Styles, and create and save original Picture Style files.
This software is aimed at advanced users who are experienced in processing
images.
Downloading and Installing the Software
Do not connect the camera to your computer before you install the software.
Otherwise, the software will not be installed properly.
Even if a previous version of the software is installed on your computer,
follow the procedure below to install the latest version. (The previous
version will be overwritten.)
1 Download the software.
Connect to the Internet from a computer and access the following Canon Web
site.
www.canon.com/icpd
Select your country or region of residence and download the software.
Decompress it on the computer. For Windows: Click the displayed installer file
to start the installer. For Macintosh: A dmg file will be created and
displayed. Follow the steps below to start the installer. (1) Double-click the
dmg file. A drive icon and installer file will appear on the desktop. If the
installer file does not appear, double-click the drive icon to display it. (2)
Double-click the installer file. The installer starts.
2 Click [Easy Installation] and follow the on-screen
instructions to install.
For Macintosh, click [Install].
Internet connection is required to download the Software Instruction Manuals
(PDF files). Download is not possible in environments with no Internet
connection.
1 Download the Software Instruction Manuals (PDF files).
Connect to the Internet and access the following Canon Web site.
www.canon.com/icpd
Select your country or region of residence and download the Instruction
Manuals.
2 View the Software Instruction Manuals (PDF files).
Double-click a downloaded Instruction Manual (PDF file) to open it.
To view the Instruction Manuals (PDF files), Adobe Acrobat Reader DC or other
Adobe PDF viewer (most recent version recommended) is required.
Adobe Acrobat Reader DC can be downloaded free from the Internet.
To learn how to use a PDF viewer, refer to its Help section.
You can use the EOS software to download the images in the camera to a
computer. There are two ways to do this.
Downloading by Connecting the Camera to the Computer
1 Install the software (p.103). 2 Use the provided interface cable
to connect the camera to a computer.
Use the interface cable provided with the camera.
Connect the cable to the camera’s digital terminal with the cable plug’s
Connect the cord’s plug to the computer’s USB terminal.
3 Use EOS Utility to download the images. Refer to the EOS Utility Instruction
Manual.
If [53: Wi-Fi/NFC] is set to [Enable], the camera cannot be connected to a
computer. Set [Wi-Fi/NFC] to [Disable], then reconnect the camera to a
computer with an interface cable.
105
Downloading Images with a Card Reader
You can also use a card reader to download images to a computer.
1 Install the software (p.103). 2 Insert the card into the card
reader.
3 Use Digital Photo Professional to download the images. Refer to the Digital
Photo Professional Instruction Manual.
When downloading images from the camera to a computer with a card reader
without using EOS software, copy the DCIM folder on the card to the computer.
106
Adobe is a trademark of Adobe Systems Incorporated. Microsoft and Windows are
trademarks or registered trademarks of Microsoft
Corporation in the United States and/or other countries. Macintosh and Mac OS
are trademarks of Apple Inc., registered in the U.S. and
other countries. SDXC logo is a trademark of SD-3C, LLC. HDMI, HDMI logo, and
High-Definition Multimedia Interface are trademarks or
registered trademarks of HDMI Licensing LLC. All other trademarks are the
property of their respective owners.
About MPEG-4 Licensing
“This product is licensed under AT&T patents for the MPEG-4 standard and may
be used for encoding MPEG-4 compliant video and/or decoding MPEG-4 compliant
video that was encoded only (1) for a personal and non-commercial purpose or
(2) by a video provider licensed under the AT&T patents to provide MPEG-4
compliant video. No license is granted or implied for any other use for MPEG-4
standard.” * Notice displayed in English as required.
This product is designed to achieve excellent performance when used with
genuine Canon accessories. Canon shall not be liable for any damage to this
product and/or accidents such as fire, etc., caused by the malfunction of non-
genuine Canon accessories (e.g., a leakage and/or explosion of a battery
pack). Please note that this warranty does not apply to repairs arising out of
the malfunction of non-genuine Canon accessories, although you may request
such repairs on a chargeable basis.
This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
Note: This equipment has been tested and found to comply with the limits for
class B digital devices, pursuant to Part 15 of the FCC Rules. These limits
are designed to provide reasonable protection against harmful interference in
a residential installation. This equipment generates, uses and can radiate
radio frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more
of the following measures: — Reorient or relocate the receiving antenna. —
Increase the separation between the equipment and receiver. — Connect the
equipment into an outlet on a circuit different from that to which the
receiver is connected. — Consult the dealer or an experienced radio/TV
technician for help.
The cable with the ferrite core provided with the digital camera must be used
with this equipment in order to comply with Class B limits in Subpart B of
Part 15 of the FCC rules.
Do not make any changes or modifications to the equipment unless otherwise
specified in the manual. If such changes or modifications should be made, you
could be required to stop operation of the equipment.
Canon U.S.A. Inc. One Canon Park, Melville, NY 11747, U.S.A. Tel No. 1-800-OK-
CANON (1-800-652-2666)
CAN ICES-3 (B) / NMB-3 (B)
For CA, USA only Included lithium battery contains Perchlorate Material
special handling may apply. See www.dtsc.ca.gov/hazardouswaste/perchlorate/
for details.
CAUTION
RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE. DISPOSE OF USED
BATTERIES ACCORDING TO LOCAL REGULATION.
Numerics
1280×720 (movie) ………………………89 1920×1080 (movie) …………………….89 640×480 (movie)
………………………..89
A
A (Scene Intelligent Auto) …………50 Access lamp………………………………30
Accessories…………………………………3 Angle of view……………………………..37 Auto Lighting
Optimizer……………….49 Auto power off……………………………31
B
Basic Zone modes ……………………..23 Battery……………………………26, 28, 32
C
C (Creative Auto) …………………….56 Cable…………………………………..3, 105 Camera
Holding the camera ………………..38 Camera shake……………………………38 Cards …………………………….18,
28, 44
Formatting …………………………….44 Low-level formatting ……………….45 SD speed
class………………………..5 Troubleshooting ………………..30, 45 Write protection ……………………..28
Charger ……………………………….24, 26 Close-ups………………………………….61 Color tone
…………………………………63 Creative Auto …………………………….56 M (Creative Zone) icon………………..8
Creative Zone modes………………….23
Date/time …………………………………. 33 Daylight saving time ………………….. 34 Dial
…………………………………………. 19 Digital terminal………………………… 105 Dioptric
adjustment……………………. 38 Drive/Self-timer……………………. 21, 58
E
Erasing images…………………………. 98 Eyepiece cover…………………………. 25
F
Feature guide …………………………… 47 File size ……………………………… 90, 99 Fine (image-
recording quality)…….. 21 Flash (Speedlite)
Flash off ……………………. 55, 58, 67 Flash sync contacts ………………. 19 Focus indicator
…………………………. 50 Focus lock ……………………………….. 53 Focus mode switch……………………. 36
Focusing AF method …………………………… 73 Difficult subjects for AF ………….. 77 Out of
focus…………………….. 38, 77 Recomposing ……………………….. 53 Food ……………………………………….. 63
Formatting (card initialization) …….. 44 Frame rate……………………………….. 89 Full
High-Definition (Full HD) …………………………………. 89 Fully automatic shooting (Scene
Intelligent Auto) ……………… 50
H
High-Definition (HD) movies……….. 89 Hot shoe ………………………………….. 19
Image Zone……………………………….23 Images
Erasing …………………………………98 Index display …………………………94 Magnification …………………………95
Playback………………………….68, 93 Shooting information ………………99 Index
display……………………………..94
L
Landscape ………………………………..60 Language selection…………………….35 Large (image-
recording quality)……21 LCD monitor………………………………17
Image playback ………………..68, 93 Menu display …………………………42 Shooting function
settings ….21, 46 Lens …………………………………………36 Lock release ………………………….37 Live View
shooting………………..54, 69 Face detection Live mode (AF)…74 FlexiZone – Single
………………….73 Information display …………………72 Possible shots ……………………….71 Quick
mode …………………………..79
M
Macro photography…………………….61 Magnification…………………………….. 95 Medium (image-
recording quality)…21 Memory cards 9 Cards Menu ……………………………………….. 42
Setting procedure …………………..43 3 icon …………………………………..8 Microphone
……………………………….84 Mode Dial………………………………….23
N
Night Portrait ……………………………. 64 Night scenes ………………………. 60, 64
Nomenclature…………………………… 19 Normal (image-recording quality)… 21 NTSC
……………………………………… 89
P
PAL…………………………………………. 89 Playback…………………………….. 68, 93 Portrait……………………………………..
59 Possible shots …………………….. 32, 71 Power
Battery level …………………………. 32 Possible shots…………………. 32, 71 Recharge
…………………………….. 26 Pressing completely ………………….. 39 Pressing halfway ……………………….
39
Q
Q (Quick Control) ………………. 40, 66 Quick Control …………………………… 66 Quick mode
……………………………… 79
R
RAW ……………………………………….. 21 RAW+JPEG …………………………….. 21 Recharging………………………………. 26
Safety precautions ……………………..13 SD, SDHC, SDXC cards 9 Cards Shooting function
settings………21, 46 Shooting information display………..99 Shooting modes
…………………………23
A (Scene Intelligent Auto) …….50 7 (Flash Off)………………………..55 C (Creative Auto)
…………………56 2 (Portrait) …………………………..59 3 (Landscape) …………………….60 4 (Close-
up)…………………………61 5 (Sports)……………………………62 P (Food) ………………………………63 6 (Night
Portrait) …………………..64 Shutter button ……………………………39 Single shooting
………………………….58 Single-image display…………………..68 Small (image-recording quality)
……21 Speaker…………………………………….96 Sports……………………………………….62 Strap
………………………………………..25
T
Temperature warning …………….81, 91 Time zone …………………………………33 Tripod socket
…………………………….20
U
USB (digital) terminal ………………..105
V
Video system …………………………….89 Viewfinder …………………………………22
Dioptric adjustment…………………38 Volume (movie playback)…………….97
113
Wireless Function Basic Instruction Manual
In Wireless Function Basic Instruction Manual, basic operation procedures for
easy-to-use “Connect to a smartphone” and “Save images to Connect Station” are
explained.
What You Can Do Using the Wireless Functions
By connecting to a Wi-Fi network or other device supporting this camera’s
wireless functions, you can perform tasks such as sending images or
controlling the camera.
(1) Connect to a smartphone
CANON iMAGE GATEWAY Web services are not supported in certain countries and
areas. For information on supported countries and areas, refer to the Canon
Web site (www.canon.com/cig).
W-2
(1) q Connect to a smartphone (p.W-17) Connect the camera to a smartphone or
tablet wirelessly and use the dedicated application “Camera Connect” to
operate the camera remotely or view images stored in the camera. In this
manual and on the camera’s LCD monitor, “smartphone” refers to smartphones and
tablets.
(2) Save images to Connect Station (p.W-35) Connect the camera to Connect
Station (sold separately) wirelessly to save images.
(3) m Send images to a Web service Share images with family and friends or
share images using a range of Web services via CANON iMAGE GATEWAY, an online
photo service for Canon users (free registration required).
Easy Connection Using the NFC Function
This camera supports NFC* which enables you to set up a connection between the
camera and a smartphone or Connect Station (sold separately) easily. For
details, see page W-14.
Instruction Manual
For how to use [Upload to Web service] and for more detailed procedures, refer
to the “Wireless Function Instruction Manual” PDF file. The “Wireless Function
Instruction Manual” PDF file can be downloaded from the Canon Web site (p.4).
cross keys on the top, bottom, left, and right.
and displayed on the LCD monitor are also used in this manual when discussing
relevant operations and functionality.
When using wireless functions, establish appropriate security at your own risk
and discretion. Canon cannot be held liable for any loss or damage caused by
unauthorized access or other security breaches.
W-4
W-5
Preparation and Basic Operation
This chapter describes how to register a nickname (for identification)
necessary for using the camera’s wireless functions and the basic operations.
First, set the camera’s nickname (for identification). When the camera is
connected to another device wirelessly, the nickname will be displayed on the
device. Be sure to set a nickname as otherwise you cannot set the wireless
functions.
1 Select [Wi-Fi/NFC]. Under the [53] tab, select [Wi-Fi/ NFC], then press <0>.
2 Select [Enable]. Press the
When this setting is selected for the first time, a screen to register a
nickname is displayed. Press <0> and proceed to step 3.
3 Enter a nickname. For instructions on entering characters, see the next
page. Enter any characters between 1 to 10 characters in length.
4 Exit the setting. When you are finished, press the
The nickname can be changed later from the [General sett.] screen. By default,
the camera name will be displayed for the nickname.
W-9
Virtual Keyboard Operation
Changing the entry area Press the button to toggle between the top and
bottom entry areas.
Moving the cursor Press the
Entering text In the bottom area, press the cross keys or turn the <6>
dial to select a character, then press <0> to enter it. You can check how many
characters you have entered, and how many more can be entered, by referring to
[/] on the upper right of the screen.
Deleting a character Press the
Finishing the text entry Press the
Canceling the text entry Press the button to cancel text entry and exit.
If a confirmation dialog is displayed, select [OK] to exit.
The basic operation for using the camera’s wireless functions is explained
here. Follow the procedures below.
1 Select [Wi-Fi/NFC]. Under the [53] tab, select [Wi-Fi/ NFC], then press <0>.
2 Select [Enable]. Press the
3 Select [Wi-Fi function]. Under the [53] tab, select [Wi-Fi function], then
press <0>.
4 Select the Wi-Fi function to connect to. Press the
When using the NFC function, see page W-14.
[Wi-Fi/NFC] Set to [Enable] to enable the selection of [Wi-Fi function] under
the [53] tab.
When the use of electronic devices and wireless devices is prohibited, such as
on board airplanes or in hospitals, set it to [Disable].
When it is set to [Enable], you cannot use the camera by connecting it to
Connect Station, a computer, printer, GPS receiver, TV set, or other device
with a cable (p.W-13).
Using the Camera While Wireless Functions Are Active
When you want to prioritize the wireless connection, do not operate the power
switch, Mode Dial, card slot/battery compartment cover, or other parts.
Otherwise, the wireless connection may be terminated.
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)