PowerLifter™ Pet/Powertrak® Pet/PowerTrak®/Momentum® Pet Vacuum Cleaning Filters | Support
- June 7, 2024
- Bissell
Table of Contents
Maintaining your filters is very important to the function of your vacuum
The steps below provide instruction on how to clean and maintain your Dirt Tank and Filters
- If you are experiencing issues with reduced suction you’ll want to follow the complete list of steps before continuing > Go to No Suction
These steps are considered a part of routine maintenanc
-
Remove the Dirt Tank > Rress the Release button and remove from Vacuum
-
Remove the Pre-Motor Filter located under the Dirt Tank
-
Clean the Pre-Motor Filter
- Rinse with a mild detergent and water > Allow to completely air dry (24 – 48 hours) before reinstalling
-
Remove the Post Motor Filter > Push the Post Motor Filter Door latch to remove the door and access the Post Motor Filter
-
Clean the Post Motor Filter > Tap against a waste bin to remove any dust or debris
-
For replacement Filters > Go to Parts & Supplies
-
If you were having suction issues and the steps above did not resolve > Go to Lower Hose/Foot
-
Recipient Email
Your Email
Your Name
Was this answer helpful?
Yes
No
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>