Hisense GoClick HT002 Wireless Screen Transmission User Guide

: June 12, 2024
: Hisense

Table of Contents

About
Connecting Laptop with GoClick
Connecting Mobile Device with NFC
Troubleshoot
Support
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

Hisense GoClick HT002 Wireless Screen Transmission User Guide

About

This document provides a practical instruction on how to use the GoClick. This includes models HT002, HT002A, and HT005E.

Hardware
HT002/HT002A

Hardware
Button
Click the Button to project and share the content of the laptop’s screen on the Hisense
interactive digital board (IDB) or the digital signage(DS) display.

LED ring
The LED ring indicates the current status of the connection.

LED Lighting Indicator

|

Function

---|---
white blinking| the Button is waiting for the user to start the HisenseShare application.
static white
off (no light)| GoClick is ready to start sharing the screen.

the GoClick is not or not properly inserted into the USB port.
the GoClick might be defective.
the USB port or computer might be defective.

USB connector
The GoClick can be plugged into a laptop (for sharing your screen) or the interactive digital board (for pairing the Button with the IDB/DS or updating its software). GoClick HT005E has a USB Type-CTM connector. Depending on the type of USB port on your laptop or on the Base Unit a convertor must be used.

NFC
Near Field Communication (NFC) enables user to share small payloads of data between two
Android-powered devices.
Getting Started
Display Paring with GoClick

Power on the device – IDB
Enable the hotspot via Settings->Network (skip this step when using HT002A and HT005E)
Open the HisenseShare App via App from Home screen (skip this step when using HT002A and HT005E)
Take a GoClick and plug it into a USB port of a IDB or DS where the content needs to be casted to.
The paring process started and LED ring starts blinking
The paring process ends around 10 seconds and the LED ring ends blinking and become static white
A notification is popped up (Figure 1) on the IDB or DS screen indicating the paring is completed
Unplug the GoClick from the USB port

Note: the display paring process is required only once unless it is paired with another display. Wireless Screen
Transmission
Figure 1

Connecting Laptop with GoClick

Power on the laptop
Search and connect the laptop to IDB’s hotspot network (skip this step when using HT002A and HT005E)
Take a GoClick and plug it into a USB port of a laptop where the screen needs to be casted. Depending on the USB port on the laptop, a convertor might have to be adapted. This convertor is not standard product offered by Hisense.
The LED ring starts blinking when the GoClick is connected successfully. Different situations are possible now:
- Connected first time:
- Windows OS: Autoplay from a new drive is initiated on the laptop. LED ring starts flashing indicating that the executable needs to be started by the user. Double-click the HisenseShare application.
  MacOS: CD-ROM drive will appear, open it and launch the application to get started.
- Application executed before:
- Windows OS: the application is started automatically on the laptop. LED ring starts flashing and ends when it is ready to share.
- MacOS: the application is started automatically on the laptop. LED ring starts flashing and ends when it is ready to share.
The LED ring changes to static white and click the button to share the laptop’s screen onto the IDB’s screen .

Connecting Mobile Device with NFC

Power on the Android mobile device
Enable the NFC function if disabled
Go to the ‘Play Store’
Search and install an app – HisenseShare
Move the mobile device towards to the NFC tag of the GoClick with a distance no more than 4cm
The HisenseShare app is opened when the NFC communication is established
The mobile device’s screen can be shared onto the IDB’s screen through the HisenseShare app

Troubleshoot

Connecting Mac laptop with GoClick

Remove the GoClick plugged into a USB port of a Mac laptop
Search app ‘Terminal’ from menu ‘Other’ via the Launchpad ( Figure 2 )
Open ‘Terminal’ tool to clean up the cache data
Under the command line: input ‘tccutil reset All’ and click enter ( Figure 3 )
Plug the GoClick into a USB port of the Mac laptop, CD-ROM drive will appear and HisenseShare application is popped up, double-click the HisenseShare application to get started.
Click ‘ok’ to accept the file access in the following pop-up window ( Figure 4 )
Click ‘Open System Preferences’ to grand HisenseShare to receive keystrokes in the following pop-up window (Figure 5 )
Click on the lock icon at the bottom left corner, enter the user name and password, click ‘Unlock’, Select checkbox “ScreenShare”, and click “Quit Now” in the pop-up window at the bottom right ( Figure 6 )
Remove the GoClick from the USB port and plug it again into the USB port
Click ‘ok’ to accept the microphone access in the following pop-up window ( Figure 7 )
Click ‘Open System Preferences’ to grand HisenseShare to receive keystrokes in the following pop-up window ( Figure 8)
Select checkbox “ScreenShare”, and click “Quit Now” in the pop-up window ( Figure 9
Remove the GoClick from the USB port and plug it again into the USB port
The LED ring changes to static white and click the button to share.