Ledvion LVS10026 Outdoor LED Solar Garden Light Instruction Manual

: June 1, 2024
: Ledvion

Table of Contents

Ledvion LVS10026 Outdoor LED Solar Garden Light
Installation instructions:
care
General Safety
Electrical safety
CE declaration
Read User Manual Online (PDF format)
Download This Manual (PDF format)

Ledvion LVS10026 Outdoor LED Solar Garden Light

Ledvion-LVS10026-0Outdoor-LED-Solar-Garden-Light-
PRODUCT

OUTDOOR – LED Solar Garden Light Ledvion Habraken 1205
5507 TB Veldhoven
The Netherlands www.ledvion.com
ART.NO.LVSl □ 026
72LM – 3000K- 0.64W – 3.7V – l50mA
Aluminium – Black

Installation instructions:

Installation only by persons with electro-technical knowledge and experience.
Not suitable for installation at locations near the sea or in other environments with a corrosive atmosphere.
Ensure the main power source is turned off.
Connect the device to the mains supply with the terminal block.
Make sure that the cables are connected securely to the terminals on the device.
When installation is finished, activate the power source and test the function.

Notes on Disposal
The product is designated for separate collection at an appropriate collection point.
Do not dispose of the product with household waste. For more information, contact the retailer or the local authority responsible for waste management.

care

Before cleaning the unit, disconnect it, if necessary form other components; do not
use aggressive cleaning agents. The unit has been carefully checked for defects. If nevertheless you do have cause for complaint, please go back to the retailer where
you have bought the product together with your proof of purchase. We are not liable for damage arising from incorrect handling, improper use or wear or tear. We reserve the right to make technical modifications.

General Safety

Read the manual carefully before use. Keep this manual for future reference.
Only use the product for its intended purposes. Do not use the product for other purposes than described in the manual.
Do not use this product if any part is damaged or defective. If the product is damaged or defective, replace the product immediately.
This product shall not be used by children without the supervision ofan adult.
Children shall not play with the device.
Do not modify the product in anyway.
Do not expose the product to water or moisture. (IP 20)
Do not immerge the product into water. (IP 44- IP 67)
Keep the product away from heat sources.
Do not block the ventilation openings.
Do not look dlrectly into the LED lamp.
Keep a minimum distance ofl meter between the lamp and the surface being illuminated.

Electrical safety

To reduce risk of electric shock, this product should only be opened by an authorized techni-cian when service is required.
Do not use the product if the cable or plug is damaged or defective. When damaged or defective, it must be replaced by the manufacturer or an authorized repair agent.
Before use, always make sure that the voltage is the same as the voltage on the rating plate of the device.
Make sure that the cable does not hang over the edge of a worktop and cannot be caught accidentally or tripped over

Warning
The light source contained in this luminaire shall only be replaced by the manufacturer or his service agent or a similar qualified person

Caution, risk of electric shock
The external flexible cable or cord of this luminaire cannot be replaced; if the cord is damaged, the luminaire has to be destroyed.

Disclaimer
Designs and specifications are subject to change without notice. All logos, brands and product names are trademarks or registered trademarks or their respective holders and are hereby re-cognized as such. Please visit us online on our website: www.ledvion.com For more information about our company and our products,

Documentation
The product has been manufactured and supplied in compliance with all relevant regulations and directives, valid for all member states of the European Union. The product complies with all applicable specifications and regulations in the country of sales.
Formal documentation is available upon request. The formal documentation includes, but is not limited to the Declaration of Conformity, the Material Safety Data Sheet and the product test report.