Ledvion LV60020 LED Panel Light Instructions

Ledvion LV60020 LED Panel Light

INSTALLATION INSTRUCTIONS

Attention
Installation should only be done by persons with electro-technical knowledge and experience. These products are not suitable for installation at locations near the sea or in other environments with a corrosive atmosphere.

1. Ensure that the main power source is turned off.
2. Connect the commercial power with th input of the matched power supply, and make sure that no copperware is exposed.
3. Connect matched power supply and panel light together through the plug.
4. Fix the panel light and power supply at a suitable place.
5. When the installation is finished, activate the power source and test the function.

INCLUDED

TECHNICAL DATA

Model

|

Voltage

|

Frequency (Hz)

|

Power/Wattage

|

Total Lumen

|

Lumen Efficiency

|

Light Source Lumen Efficiency

|

Dimensions

|

Color

|

Energy Efficiency

---|---|---|---|---|---|---|---|---|---
LV60020| AC220-240V| 50/60 Hz| 24 W| 3840 LM| 160 LM/W| 210 LM/W| 595 x 595 x 33 mm| 4000K| A
LV60021| AC220-240V| 50/60 Hz| 24 W| 3840 LM| 160 LM/W| 210 LM/W| 595 x 595 x 33 mm| 6500K| A
LV60022| AC220-240V| 50/60 Hz| 24 W| 3840 LM| 160 LM/W| 210 LM/W| 1195 x 295 x 33mm| 4000K| A
LV60023| AC220-240V| 50/60 Hz| 24 W| 3840 LM| 160 LM/W| 210 LM/W| 1195 x 295 x 33 mm| 6500K| A

• This product contains a light source of 210 LM/W

PANEL DIMENSIONS

• Luminaires are not suitable for covering with thermally insulating material.

MANUAL INSTALLATION

T-bar ceiling recessed installation

Suspension installation

• The suspension accessories are sold separately

Surface mounting frame installation

Notes on Disposal

The product is designated for separate collection at an appropriate collection point. Do not dispose of the product with household waste. For more information, contact the retailer or the local authority responsible for waste management.

Care

Before cleaning the unit, disconnect it, if necessary form other components; do not use aggressive cleaning agents. The unit has been carefully checked for defects. If nevertheless, you do have cause for complaint, please go back to the retailer where you have bought the product together with your proof of purchase. We are not liable for damage arising from incorrect handling, improper use or wear or tear. We reserve the right to make technical modifications.

General Safety

• Read the manual carefully before use. Keep this manual for future reference. Only use the product for its intended purposes. Do not use the product for other purposes than described in the manual. Do not use this product if any part is damaged or defective. If the product is damaged or defective, replace the product immediately.
• This product shall not be used by children without the supervision of an adult. Children shall not play with the device.
• Do not modify the product in any way.
• Do not expose the product to water or moisture. (IP 20)
• Do not immerge the product into water. (IP 44 – IP 67)
• Keep the product away from heat sources.
• Do not block the ventilation openings.
• Do not look directly into the LED lamp.
• Keep a minimum distance of 1 meter between the lamp and the surface being illuminated.

Electrical safety

• To reduce risk of electric shock, this product should only be opened by an authorized technician when service is required.
• Do not use the product if the cable or plug is damaged or defective. When damaged or defective, it must be replaced by the manufacturer or an authorised repair agent.
• Before use, always make sure that the voltage is the same as the voltage on the rating plate of the device.
• Make sure that the cable does not hang over the edge of a worktop and cannot be caught accidentally or tripped over.

Warning

• The light source contained in this luminaire shall only be replaced by the manufacturer or his service agent or a similar qualified person. Che external flexible cable or cord of this luminaire cannot be replaced; if the cord is damaged, the luminaire has to be destroyed.

Disclaimer

Designs and specifications are subject to change without notice. All logos, brands and product names are trademarks or registered trademarks or their respective holders and are hereby recognized as such. Please visit us online on our website: www.ledvion.com For more information about our company and our products.

Documentation

The product has been manufactured and supplied in compliance with all relevant regulations and directives, valid for all member states of the European Union. The product complies with all applicable specifications and regulations in the country of sales. Formal documentation is available upon request. The formal documentation includes, but is not limited to the Declaration of Conformity, the Material Safety Data Sheet and the product test report.

CE declaration
This product complies with the following directives:

• LVD: 2014/35/EU
• EMC: 2014/30/EU
• ROHS: 2011/65/EU

The complete Declaration of Conformity Document (DOC) can be found on our website.

• www.ledvion.com

Specifications

• Model: LV60020
• Voltage: AC220-240V
• Frequency (Hz): 50/60 Hz
• Power/Wattage: 24 W
• Total Lumen: 3840 LM
• Lumen Efficiency: 160 LM/W
• Light Source Lumen Efficiency: 210 LM/W*
• Dimensions: 595 x 595 x 33 mm
• Color Temperature: 4000K (LV60020), 6500K (LV60021), 4000K (LV60022), 6500K (LV60023)
• Energy Efficiency: A

Frequently Asked Questions (FAQ)

Q: What is the recommended installation height for this fixture?
A: The recommended installation height is typically between 2.5 to 4 meters from the ground.

Q: Can I use dimmer switches with this light panel?
A: Yes, you can use compatible dimmer switches for adjusting the brightness levels.

Q: How do I reset the light panel if it malfunctions?
A: To reset the light panel, turn off the power supply for a few minutes and then turn it back on.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>