Ledvion LV70001 LED High Bay User Manual
- May 15, 2024
- Ledvion
Table of Contents
Ledvion LV70001 LED High Bay
Product Specifications
- Models: LV70001 to LV70016
- Installation: Requires electro technical knowledge and experience
- Environment: Not suitable for locations near the sea or corrosive atmospheres
Product Usage Instructions:
Installation Process:
- Ensure the main power source is turned off.
- Connect the device to the mains supply with the terminal block (not included).
- Ensure secure connection of cables to the terminals on the device.
- After installation, activate the power source and test the function.
German (DE) Instructions:
- Make sure the connection lines are voltage-free by switching off and securing the fuse.
- After installation, activate the power source and test the function.
Dutch (NL) Instructions:
- Switch off the mains voltage before starting installation and/or maintenance.
- Attach the mains power cable to the product’s terminal block (not included).
- Ensure correct cable connection to the terminals.
- After installation, re-engage the fuse and test the function.
French (FR) Instructions:
- Ensure clean contact between the power cable and the device’s clips (clips not included).
FAQ:
-
Q: Can these products be installed near the sea?
A: No, these products are not suitable for installation near the sea or in corrosive environments. -
Q: Do I need to purchase a terminal block separately for installation?
A: Yes, a terminal block is not included with the product and needs to be purchased separately for installation.
LED HIGH
BAY 5 YEARS OF WARRANTY 5692 DH Son en Breugel Ekkersrijt 4304 The Netherlands
www.ledvion.com LV70001, LV70002, LV70003, LV70004,
LV70005, LV70006, LV70007, LV70008, LV70009, LV70010, LV70011, LV70012,
LV70013, LV70014, LV70015 & LV70016
INSTALLATION INSTRUCTIONS
Attention
Installation should only be done by persons with electro technical knowledge
and experience. These products are not suitable for installation at locations
near the sea or in other environments with a corrosive atmosphere.
- Ensure the main power source is turned off.
- Connect the device to the mains supply with the terminal block*.
- Make sure that the cables are connected securely to the terminals on the device.
- When installation is finished, activate the power source and test the function.
*Terminal block not included.
INCLUDED
TECHNICAL DATA:
Model| Volt a ge| Po w er / W a
ttage| Useful Lumen| Lumen| Dimensions| B e am
angl e| Color temperature
---|---|---|---|---|---|---|---
LV70001| AC220-240V| 100W| 13700LM| 17500LM| ****
154,7 • 123,05 • dia 205 mm
| 120°| 3000K
LV70002
| AC220-240V| l00W| ****
13700LM
| ****
17500LM
| ****
754,7 • 123,05 • dia 205 mm
| ****
120°
| ****
4000K
LV70003| AC220-240V| l00W| 13700LM| 17500LM|
154,7 * 123,05 • dia 205 mm| 120°| 6500K
LV70004| AC220-240V| 150w| 20500LM| 26500 LM| *
162,7 131,05 • dia 235 mm| ** 120°| 4000K
LV70005| AC220-240V| 150W| 20500LM| 26500LM|
162,7 • 131,os • dia 235 mm| 120°| **** 6500K
LV70006
| ****
AC220-240V
| 200W| 27300LM| 3SOOOLM| 172,75 * 140,05 • dia 265
mm| 120°| 4000K
LV70007| AC220-240V| 200W| 27300LM| 3SOOOLM|
172,75 * 140,05 • dia 265 mm| 120°| 6500K
LV70008| AC220-240V| 240W| 32700LM| 42000LM|
172,75′ 14 0,05 ‘ d ia 265 mm| 120°| 4000K
LV70009| AC220-240V| 240W| 32700LM| 42000LM|
172,75 • 140,05 • dia 265 mm| 120°| 6500K
ACCESSOIRIES:
HIGH BAY REFLECTORS
HIGH BAY ADJUSTABLE BRACKET
| SKU: | LV70014 |
|---|---|
| Compatible for | 100-150-200-240W |
| Body type | Steel |
HIGH BAY SENSOR
HIGH BAY SENSOR REMOTE CONTROL
Note: the installation base must be able to support 10 times weight of the products
The minimum distance from lighted objects is 1m Replace any cracked protective shield.
MANUAL INSTALLATION:
DIMMER INSTALLATION:
OPTIONAL REFLECTOR INSTALLATION
OPTIONAL BRACKET INSTALLATION
Notes on Disposal
The product is designated for separate collection at an appropriate collection
point. Do not dispose of the product with household waste. For more
information, contact the retailer or the local authority responsible for waste
management.
Care
Before cleaning the unit, disconnect it, if necessary form other components; do not use aggressive cleaning agents. The unit has been carefully checked for defects. If nevertheless you do have cause for complaint, please go back to the retailer where you have bought the product together with your proof of purchase. We are not liable for damage arising from incorrect handling, improper use or wear or tear. We reserve the right to make technical modifications.
General Safety
- Read the manual carefully before use. Keep this manual for future reference.
- Only use the product for its intended purposes. Do not use the product for other purposes than described in the manual.
- Do not use this product if any part is damaged or defective. If the product is damaged or defective, replace the product immediately.
- This product shall not be used by children without the supervision of an adult. Children shall not play with the device.
- Do not modify the product in any way.
- Do not expose the product to water or moisture. (IP 20)
- Do not immerge the product into water. (IP 44 – IP 67)
- Keep the product away from heat sources. Do not block the ventilation openings.
- Do not look directly into the LED lamp.
- Keep a minimum distance of 1 meter between the lamp and the surface being illuminated.
Electrical safety
- To reduce risk of electric shock, this product should only be opened by an authorized technician when service is required.
- Do not use the product if the cable or plug is damaged or defective. When damaged or defective, it must be replaced by the manufacturer or an authorised repair agent.
- Before use, always make sure that the voltage is the same as the voltage on the rating plate of the device.
- Make sure that the cable does not hang over the edge of a worktop and cannot be caught accidentally or tripped over.
Warning
- The light source contained in this luminaire shall only be replaced by the manufacturer or his service agent or a similar qualified person.
- Caution, risk of electric shock.
- The external flexible cable or cord of this luminaire cannot be replaced; if the cord is damaged, the luminaire has to be destroyed.
Disclaimer
Designs and specifications are subject to change without notice. All logos,
brands and product names are trademarks or registered trademarks or their
respective holders and are hereby recognized as such. Please visit us online
on our website: www.ledvion.com For more information
about our company and our products.
Documentation
The product has been manufactured and supplied in compliance with all relevant
regulations and directives, valid for all member states of the European Union.
The product complies with all applicable specifications and regulations in the
country of sales. Formal documentation is available upon request. The formal
documentation includes, but is not limited to the Declaration of Conformity,
the Material Safety Data Sheet and the product test report.
CE declaration
This product complies with the following directives: EMCD 2014/30/EU LVD:
2014/35/EU ROHS: 2011/65/EU ERP: (EU)2019/2020, (EU)2019/2015 The complete
Declaration of Conformity Document (DOC) can be found on our website.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>