Ledvion LVS10012 Outdoor Solar LED Lamp Instruction Manual

June 2, 2024
Ledvion

Ledvion LVS10012 Outdoor Solar LED Lamp

Please follow all instructions to operate.
Save this manual for future reference.

Specification

Product Name Solar LED Wall Light with Sensor
Power 4W
Brightness 500LM
Lamp Dimension 211.1140114.8mm
LEDs SMD2835*56PCS (Front 54PCS+Back 2PCS)
Li-ion Battery 18650, 3.7V, 2000mAh, 7.4Wh (Replaceable)
Solar Panel 2.4W, DC5.5V, Mono with tempered glass
Working Modes Two Optional Working Modes
Charging Time 12-15hrs to fully charge
Lighting Time Sensor Mode: 35hrs+ (based on 300 times of detections)

Keep Lighting Mode: 30hrs+ (based on 200 times of detections)
PlR Detection Angle/ Distance| 120°/ 2-6Mtrs
IP Degree| IP65 Waterproof
Housing Material| ABS+PC, anti-UV
Installation Height| 2-4Mtrs
Working Temperature| -20~50°C
Storage Temperature| 0~45°(
Warranty| 24 months (battery 12 months warranty)
Packing| Color box (1Solar Light, 1Accessory Bag, 1 Measure Card, 1 User Manual)

Top Features

| | |
---|---|---|---

Front & Back Light

| Solar Powered| Auto On/Off|

Ultra Bright

| | |

Two Optional Lighting Modes

| Long lighting Time| Safe|

IP65 Waterproof

| | |

Zero Electricity Bills

| PIR Detective| Cordless to Install|

Battery Replaceable

Installation

The recommended installation height is 2-4 meters.

  1. Please use measure card to mark holing positions and drill 3 holes of qi6mm.
  2. Install 3 expansion plugs into the holes.
  3. Install 3 screws in the expansion plugs, allow t he screws to protrude slightly.
  4. Align the lower notch on the back of the light with the lower screw and align the holes at the top of the light with the upper screws to fix the light well.
  5. Press the button on the back of the light to turn on the light and select desired working mode.
    Installation

Packing Content

  • 1 *Solar Light

  • 1 *Measure Card

  • 1 *Accessory Bag

  • 1 *User Manual

Two Optional Working Modes

Two Optional Working Modes

Mode A: Sensor Mode
Press the button 1st time, the back light flashes once, it’s Sensor Mode:

When battery power is greater than 30%:
Lamp automatically lights up at night and turns to full brightness when motion is detected within the range of <6mtrs, then dims to lower brightness(front light and back light both on) after 20 seconds of no motion.
Two Optional Working Modes

When battery power is less than 30%:
Lamp automatically lights up at night and turns to full brightness when motion is detected within the range of <6mtrs, then dims to lower brightness(front light off, only back light on) after 20 seconds of no motion.
Two Optional Working Modes

Mode B: Keep Lighting Mode
Press the button 2nd time, the back light flashes twice, it’s Keep Lighting Mode:
Two Optional Working Modes

Lamp automatically lights up at dusk and remains 50% brightness.
After 5 hours or when the battery power is less than 30%, it turns to energy saving mode, which is lamp automatically turns to 50% brightness when motion is detected within the range of <6mtrs, then dims to lower brightness (front light off, only back light on) after 20 seconds of no motion.

Mode C: Off
Press the button 3rd time, lamp turns off.

Wide Applications

☑ Garden
☑ Villa
☑ Stairs
☑ Pathway
☑ Entrance
☑ Farm
☑ Parking Lot
☑ Fence
☑ Pavilion
☑ Holiday Resort
☑ Courtyard
☑ Gate
☑ School
☑ Balcony
☑ Community Area
☑ Scenic Area
☑ Garage
☑ Patio
☑ Square
☑ Swimming Pool
☑ Hotel

How to replace battery?

  1. Loosen the screws, open battery cover.
    How to replace battery?

  2. Remove old battery, change new battery and connect positive and negative electrode correctly. (18650, 3.7V, 2000mAh, 7.4Wh)
    How to replace battery?

  3. Then install back the cover, lock the screws.
    How to replace battery?

Warnings

  1. This is a solar powered lamp, please install it in a location where can get enough sunshine.

  2. Please note the lighting time depends on sunshine duration & weather & working mode.

  3. The lamp will light up automatically at dusk.

  4. Built-in intelligent IC is with over-charge, over-discharge and over-voltage protection, safe and durable.

  5. The lamp is equipped with an internal Li-ion battery, which is replaceable.
    If any need, please contact seller for new battery(18650, 3.7V, 2000mAh, 7.4Wh).

  6. If the battery is taken out and put back in or replaced with new ones, please toward the solar panel to sunshine or a strong light to activate the lamp.

  7. Non-professionals please do not disassemble the lamp.

  8. Please do not dispose the battery with household garbage to avoid explosion.

Customers Support

Symbols

ART.NO. LVSl00l2 – LVSl00l3
Ledvion
Habraken 1205
5507 TB Veld hoven
The Netherlands
www.ledvion.com

Logo

References

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals