VEVOR F-100-V1 Powder Filling Machine User Manual

June 1, 2024
VEVOR

VEVOR F-100-V1 Powder Filling Machine User Manual
VEVOR F-100-V1 Powder Filling Machine User Manual

We continue to be committed to provide you tools with competitive price. “Save Half”, “Half Price” or any other similar expressions used by us only represent sines tomato of savings you might benefit from buying certain tools with us compared tothemajortop brands and does not necessarily mean to cover all categories of tools offered buys. You are kindly reminded to verify carefully when you are placing an order with us if youareactually saving half in comparison with the top major brands.

F-100-V1, F-200-V1, F-100-V2, F-200-V2, F-100-V3

F-500-V1 F-500-V2
Assembly Instructions
F-999-V1 F-999-V2 F-999-V3
Assembly Instructions
F-3000-V2F-5000-V2
Assembly Instructions

NEED HELP? CONTACT US!

Have product questions? Need technical support? Please feel freetocontact us:

Technical Support and E-Warranty Certificatewww.vevor.com/support

This is the original instruction, please read all manual instructions carefully before operating. VEVOR reserves a clear interpretationofouruser manual. The appearance of the product shall be subject totheproduct you received. Please forgive us that we won’t informyouagainifthere are any technology or software updates on our product.

WARNING

  1. Read carefully and understand all ASSEMBLY AND OPERATION INSTRUCTIONS before operating.
  2. Failure to follow the safety rules and other basic safety precautions may result in serious personal injury

GENERAL SAFETY RULES

Important reminder

  1. Before use, please carefully read the product manual and ensure that you understand and comply with all safety warnings and usage precautions.
  2. Do not use this product for other non-designated purpose  stoavoidun expected risks.
  3. This product is only applicable to users within the specifiedagegroupand scope of application. Please strictly comply with relevant agerestrictions and warnings.
  4. If there are any abnormalities in the product, please stopusingit immediately and contact the after-sales service center for consultationortoarrange for repair

Environmental requirements for use

  1. Please use in a dry and well-ventilated environment toavoidextremeenvironmental conditions such as water activation, high temperature,highhumidity, and extremely low temperature.
  2. Avoid direct sunlight or contact with fire sources to prevent product damage or fire.
  3. Please ensure a stable usage environment and prevent theproductfrombeing hit or dropped to avoid damage.

Safety Operation Guidelines

  1. Please use a suitable power supply and voltage, and do not use damaged power cords or plugs.
  2. When using this product, do not short-circuit circuits or connect mismatched devices to avoid risks such as electric shock and fire
  3. When foreign objects are found on the surface of the product, please immediately stop using and remove the foreign objects beforecontinuingtouse.
  4. When using this product continuously for a long time, pleasers IN goodtime to avoid excessive fatigue.
  5. Do not plug or unplug the power plug with wet hands toavoidtheriskofelectric shock.

Maintenance and upkeep

  1. Regularly maintain and clean the product. Before cleaning, please disconnect the power supply and wipe it with a dry cloth. Be careful hothouse alcohol, acid or alkali solutions, etc
  2. When the product is not in use for a long time, please disconnect the power supply promptly to save energy and extend the product’s lifespan.
  3. Do not disassemble the product or replace components onyourown.Ifyou encounter any malfunctions, please contact the after salesservicecenter.

Emergency handling measures

  1. When there are abnormal situations or accidents with theproduct,please stop using it as soon as possible.
    If overheating, smoking, or abnormal sound are found, pleaseimmediatelycut off the power supply and contact the after-sales service center.

  2. If the product involves an emergency situation that may harmpersonalsafety, please call the emergency rescue number in a timely manner.

MODEL AND PARAMETERS

**Model| F-100- V1| F-100- V2| F-100- V3| F-200- V1| F-200- V2| F-500- V1| F-500- V2
---|---|---|---|---|---|---|---
**
Suitable Particle| Granular and powdered materials. Not floury materials,smooth surface particles| Granular and powdered materials. Not floury materials,smooth surface particles
Particle Size| Φ<10mm| Φ<10mm| Φ<20mm
Filling Range|
1-99.9g| 1-200g| 10-500g
Voltage| AC120 V 60Hz| AC230 V 50Hz| AC230 V 50Hz| AC120 V 60Hz| AC230 V 50Hz| AC120 V 60Hz| AC230 V 50Hz
Power (Max.)|
28W| 28W| 28W| 29W| 29W| 74W| 74W
**Model| ** F-999-V1| F-999-V2| F-999-V3| F-3000-V2| F5000-V2
---|---|---|---|---|---
Suitable Particle| Granular and powdered materials. Not floury materials,smooth surface particles| Granular and powdered materials. Not floury materials,smooth surface particles
Particle Size| Φ<20mm| Φ<35mm| Φ<35mm
Filling Range|
10-999g| 20-3000g| 20-5000g
Voltage| AC120V 60Hz| AC230V 50Hz| AC230V 50Hz| AC230V 50Hz| AC230V 50Hz
Power (Max.)|
83W| 83W| 83W| 88W| 96W

STRUCTURE DIAGRAM

F-100-V1, F-100-V2, F-100-V3 ,F-200-V1 ,F-200-V2 ,F-500-V1 ,F-500-V2
Assembly Instructions

1. Hopper 2. Adjusting Plate 3.Host Machine 4.Outlet 5.Control Panel

F-999-V1, F-999-V2, F-999-V3 , F-3000-V2 ,F-5000-V2

1.Hopper 2. Adjusting Plate 3.Host Machine 4.Power Outlet 5.Outlet 6.Control Panel

COMPONENTS

Model Parts| F-100-V1 F-100-V2 F-100-V3| F-200-V1 F-200-V2| F-500-V1 F-500-V2| F-999-V1 F-999-V2 F-999-V3| F-3000- V2| F-5000- V2
---|---|---|---|---|---|---
Powder Filling Machine| ×1| ×1| ×1| ×1| ×1| ×1
Open-end Wrench (10MM )| ×1| ×1| ×1| /| /| /
Open-end Wrench(14MM)| /| /| /| ×1| ×1| ×1
Power Cord| ×1| ×1| ×1| ×1| ×1| ×1
Pedal Switch| /| /| /| ×1| ×1| ×1
User Manual| ×1| ×1| ×1| ×1| ×1| ×1

OPERATING INSTRUCTIONS

F-100-V1, F-100-V2, F-100-V3 ,F-200-V1 ,F-200-V2

  1. Lay the product flat and remove the screws (A,B)accordingtolabel instructions as shown .
  2. Put the product in a stable position, plug in the power cord, andthenyou’re ready to use.
    Assembly Instructions

F-500-V1, F-500-V2:

  1. Open the buckle on the back cover and remove the back cover,andthenremove the screws according to label instructions as shown.Put banknote back cover.
  2. Put the product in a stable position, plug in the power cord, andthenyou’re ready to use.
    Assembly Instructions

F-999-V1, F-999-V2,F-3000-V2,F-5000-V2:

  1. Hopper installation
    Remove the installed screws. Put the hopper in and lock it withthescrewsyou just removed as shown.(Tips: The side of the hopper withtheadjustingplate faces forward)
    Assembly Instructions

  2. Plug in the power cord and pedal switch as shown.
    Assembly Instructions

  3. Remove the screws according to label instructions as shown
    Assembly Instructions

The operating instructions
Assembly Instructions

F-100-V1,F-100-V2,F-100-V3 ,F-200-V1 ,F-200-V2,F-500-V1,F-500-V2,F-999-V1,F-999-V2,F-999-V3

  1. Turn on the power switch and the machine will makes asound.Themachine is in a standby state at this time.

  2. Press “Discharge” and then “Clear” to zero the Weight(g)windowdisplay.

  3. Set the weight of the material by pressing “Weight +/-“(For example,08.0 stands for 8 grams).

  4. Lower the adjustment plate to the lowest position.Loadmaterial intothehopper.Press start key. Adjust the position of the adjustment plate according to the need for filling material.
    Assembly Instructions

  5. Select the desired speed”Fast、Medium、Slow” accordingtodifferentmaterials on the control panel。

  6. Press “Start”, the machine starts to work, and when a “tick” isheard,thefilling is complete. Place the container into the discharge port toreceivethematerial. (Tips:The container needs to be close to the sensor totriggerit.)The container is removed and the machine performs the NeXT roundofautomatic filling.
    Assembly Instructions

Note:

  1. To clear, press the “Clear” key.
  2. To remove the remaining material, hold down the “Discharge”keyfor5seconds while the machine is stopped. The machine will continuetowork,when the material is finished, please press the “Stop “key to stop.(Tips:theadjustment plate should be fully open.)
    Assembly Instructions

F-3000-V2,F-5000-V2:

  1. Turn on the power switch.

  2. Press “Discharge” and then”Zero” to zero the Weight(g)windowdisplay.

  3. Set the weight of the material by pressing ” +/-“(For example, 0800stands for 800 grams).

  4. Lower the adjustment plate to the lowest position.Loadmaterial intothehopper.Press “start “key. Adjust the position of the adjustment plateaccording to the need for filling material
    Assembly Instructions

  5. Select the desired speed”Fast、Medium、Slow” accordingtodifferentmaterials on the control panel.

  6. Press “Start”, the machine starts to work, and when a “tick” isheard,thefilling is complete. Put the bag over the discharge port andpressthefootswitch to automatically discharge the material. After dischargingthematerials,the machine automatically fills the next round of material

Note:
To remove the remaining material, Press the “Cleaning material”keywhilethe machine is stopped.The machine will continue to work, whenthematerial is finished, please press the “Stop “key to stop.(Tips:theadjustment plate should be fully open.)

MAINTENANCE

  1. The user shall select a quantitative filling machine of asuitablerangeaccording to the said products.
  2. The machine contains a precision electronic scale, it is forbiddentobeoverweight.
  3. When in use, please keep the machine level and stabletoavoidbigvibrations or impact; otherwise, it may cause damage.
  4. After use, please clean the material and keep the machine clean
  5. When the machine is not in use, please empty the materialsandstoreitin a ventilated and dry place.
  6. Please clean the product and the filter in time after each use.
  7. Always keep the product outside clean.

Please store the product in a dry and ventilated place
Assembly Instructions

If the fuse is damaged, replace it as shown. Fuse

TROUBLESHOOTING

Problem Possible Cause Possible Solution
The     product          doesn’t work The power cord is not plugged in
properly Reconnect    the    power cord
Fuse failure Replace the fuse
Abnormal weight display No     material     in     thehopper Add material
Material stuck in the internal weighing bin. Clean stuck materials
The   indicator   on   the control panel is blinking The power cord is not
plugged in properly Reconnect    the    power cord
The internal wiring of the machine is loose Find     a   professional

technician to repair
Filling material is slow| Material may be stuck| Clean up stuck materials

Manufacturer : Shanghaimuxinmuyeyouxiangongsi
Address: Baoshanqu Shuangchenglu 803long 11hao 1602A-1609shi Shanghaies REP: SHUNSHUN GmbH
Römeräcker 9 Z2021,76351 Linkenheim-Hochstetten, Germany
Tel : +49 1727041930 [email protected]
UK REP: Pooled as Group Ltd
Unit 5 Albert Edward House, The Pavilions Preston, United Kingdome: 01772418127 [email protected]
Imported to AUS : SIHAO PTY LTD. 1 ROKEVA STREETEASTWOOD NSW 2122 Australia
Imported to USA : Sanven Technology Ltd. Suite 250, 9166 Anaheim Place, Rancho Cucamonga, CA 91730Made In China Company Logo

Read User Manual Online (PDF format)

Loading......

Download This Manual (PDF format)

Download this manual  >>

VEVOR User Manuals

Related Manuals