blinds 2go SmartView Electric Roller Blinds Installation Guide
- June 4, 2024
- blinds 2go
Table of Contents
blinds 2go SmartView Electric Roller Blinds
Fitting the brackets
The brackets offer three methods of installation:
Top Tip: Top-fixing or face-fixing are recommended for most installations, whereas side-fixing is only recommended if the width you gave us was taken right at the top of the recess.
Fitting the blind
Locate the depression end (the opposite end to the controls) of the blind into the circular hole in the corresponding bracket. Lift the control end of the blind and slot the rectangular ‘lugs’ into the corresponding slots on the bracket.
Once your blind is installed we recommend plugging in the motor to allow it to fully charge before use. Plug the charging cable (included) into the motor charging port and allow to charge until the LED on the charger plug turns green.
Download the SmartView App
On the front of the swing tag that comes with your blind, you’ll find a handy QR code you can scan with your phone. Scan this to download the SmartView app – you’ll be setting up your blinds in moments!