VOLLRATH BCO-2000 Premium and CanMaster Can Openers Instruction Manual

VOLLRATH BCO-2000 Premium and CanMaster Can Openers

Safety Precautions

To ensure safe operation, read the following statements and understand their meaning. This manual contains safety precautions which are explained below. Please read carefully.

• WARNING
  Warning is used to indicate the presence of a hazard that will or can cause severe personal injury or death.

• CAUTION
  Caution is used to indicate the presence of a hazard that will or can cause minor or major personal injury if the caution is ignored.

• NOTICE:
  Notice is used to note information that is important but not hazard-related.

To reduce risk of injury or damage to the equipment:

• Check the can opener before each use to insure it is clean.
• Check the blade to ensure that it is securely fastened and in good condition. Replace nicked or worm blades immediately.

FUNCTION AND PURPOSE

The can openers are designed to easily pierce and safely open cans. They are not intended for household or laboratory use.

SPARE PARTS

Item No.

|

Model

| Bar Length IN (CM)| Gear Size| Material Construction
---|---|---|---|---
BCO-2000|

EaziClean®

| 16 (40.6)| 1 (2.5)| Medium-duty, zammac alloy
BCO-3000| 25 (63.5)
BCO-5000| 16 (40.6)| 1¹⁄₂ (3.8)| Heavy-duty, stainless steel
BCO-6000| 25 (63.5)
BCO-7000| 25 (63.5)| 1¹⁄₂ (3.8)| Titan, stainless steel
BCO-1| Premium™| 16 (40.6)| 1 (2.5)| Medium-duty, aluminum alloy
BCO-4| CanMaster™| 16 (40.6)| 1¹⁄₂ (3.8)| Medium-duty, aluminum alloy

BEFORE INSTALLATION

Prior to first use, wash all the components with warm, soapy water. Rinse thoroughly.

INSTALL THE BASE

Fixed Location

Tools You Will Need
Flathead screwdriver

1. Choose a convenient location with a firm work surface.
2. Mount the platform base using the included hardware as shown below.
   NOTICE: If you are using a thin-gauge work surface, Vollrath suggests placing a spacer plate underneath. This will prevent the work surface from flexing, which may cause the can contents to spill when opening.

Variable Location

1. If the can opener is not permanently mounted to a countertop, install the clamp attachment to the platform base.
2. Tighten the clamp to secure the platform base to the countertop.

OPERATION

1. Place the bar into the base.
2. Lift the handle to the UP position. Place the can against the bar. Using a swift downward movement, punch the blade into the can lid.
3. Lower the handle 90° to the DOWN position to engage the gear drive.
4. Rotate the handle in a clockwise direction to open the can.
5. Raise the handle to the UP position to disengage the gear drive.
6. Lift up on the handle to raise the bar sufficiently to release the blade from the can. Move the can away from the bar, taking care not to spill the contents.

CLEANING

NOTICE: Food acids can cause the blade to become dull and corrode the metal. Immediately clean the unit after every use.
NOTICE: Hand wash only.

1. Using HOT water and a bristle brush, thoroughly rinse off or spray off the can opener.
2. Remove the blade cartridge.
3. Inspect the blade to ensure that it is in good condition.
4. If the blade has a nick, discard and replace with a new blade. Refer to the instructions included with the replacement blade.

TROUBLESHOOTING

SERVICE AND REPAIR

• Serviceable parts are available on Vollrath.com.
• To avoid serious injury or damage, never attempt to repair the unit or replace a damaged power cord yourself. Do not send units directly to
• The Vollrath Company LLC. Please contact Vollrath Technical Services for instructions.
• When contacting Vollrath Technical Services, please be ready with the item number, model number (if applicable), serial number, and proof of purchase showing the date the unit was purchased.

WARRANTY STATEMENT FOR THE VOLLRATH CO. L.L.C.

• This warranty does not apply to products purchased for personal, family or household use, and The Vollrath Company LLC does not offer a written warranty to purchasers for such uses.
• The Vollrath Company LLC warrants the products it manufactures or distributes against defects in materials and workmanship as specifically described in our full warranty statement. In all cases, the warranty runs from the date of the end user’s original purchase date found on the receipt.
• Any damages from improper use, abuse, modification or damage resulting from improper packaging during return shipment for warranty repair will not be covered under warranty.
• For complete warranty information, product registration and new product announcement, visit www.vollrath.com.

ABOUT COMPANY

• The Vollrath Company, L.L.C.
  • 1236 North 18th Street
  • Sheboygan, WI 53081-3201 U.S.A.
  • Main Tel: 800.624.2051 or 920.457.4851
  • Main Fax : 800.752.5620 or 920.459.6573
  • Customer Service: 800.628.0830
  • Canada Customer Service: 800.695.8560
• Technical Services
  • techservicereps@vollrathco.com
  • Induction Products : 800.825.6036
  • Countertop Warming Products : 800.354.1970
  • Toasters: 800-309-2250
  • All Other Products: 800.628.0832

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>