SIGLENT SDS7404A Super Phosphor Oscilloscope Instructions
- June 1, 2024
- SIGLENT
Table of Contents
- SDS7404A Super Phosphor Oscilloscope
- Specifications:
- Product Usage Instructions:
- Oscilloscope Usage:
- Digital Multimeter Probes & Accessories Usage:
- Arbitrary Waveform Generator Usage:
- Q: How do I calibrate the oscilloscope?
- Q: Can I use the digital multimeter probes for high-voltage
- Q: What is the maximum frequency output of the arbitrary
SDS7404A Super Phosphor Oscilloscope
“`html
Specifications:
-
Brand: Siglent Technologies Co., Ltd
-
Product Type: Oscilloscope, Digital Multimeter Probes &
Accessories, Arbitrary Waveform Generator -
Series: SDS7000A, SDS6000A, SDS7404A, SDS7304A, SDS6204A,
SDS6104A, SDS6054A, SDS6000L, SDS5000X, SDS6208L, SDS6108L,
SDS6058L, SDS6204L, SDS6104L, SDS6054L, SDS5104X, SDS5054X,
SDS5034X, SDS3000X HD, SDS2000X HD, SDS3104X HD, SDS3054X HD,
SDS3034X HD, SDS2354X HD, SDS2204X HD, SDS2104X HD, SDS2000X Plus,
SDS2000X-E, SDS2354X Plus, SDS2204X Plus, SDS2104X Plus, SDS2102X
Plus, SDS2352X-E, SDS2202X-E, SDS1000X HD, SDS800X HD, SDS1204X HD,
SDS1202X HD, SDS1104X HD, SDS1102X HD, SDS824X HD, SDS822X HD,
SDS814X HD, SDS812X HD, SDS804X HD, SDS802X HD, SDS1000X-E,
SDS1000DL+, SDS1000CML+, SHS1000X/SHS800X Series, SHS1202X,
SHS1102X, SHS820X, SHS810X, SDG7000A Series, SDG7102A, SDG7052A,
SDG7032A, SDG6000X Series, SDG2000X Series, SDG6052X, SDG6032X,
SDG6022X, SDG2122X, SDG2082X, SDG2042X, SDG1000X Series, SDG1062X,
SDG1032X, SDG800 Series, SDG830, SDG810
Product Usage Instructions:
Oscilloscope Usage:
To use the oscilloscope:
- Connect the oscilloscope to the power supply.
- Connect the probes to the signal source.
- Adjust the settings such as frequency and amplitude.
- View the waveform on the display screen.
- Analyze and interpret the waveform as needed.
Digital Multimeter Probes & Accessories Usage:
To use the digital multimeter probes & accessories:
-
Connect the probes to the digital multimeter.
-
Select the appropriate measurement function (voltage, current,
resistance). -
Connect the probes to the component being measured.
-
Take the measurement and interpret the results.
Arbitrary Waveform Generator Usage:
To use the arbitrary waveform generator:
-
Power on the waveform generator.
-
Select the desired waveform type (sine wave, square wave,
etc.). -
Set the frequency and amplitude of the waveform.
-
Output the waveform to the desired device or circuit for
testing or analysis.
FAQ:
Q: How do I calibrate the oscilloscope?
A: Calibration procedures can vary by model. Please refer to the
user manual specific to your oscilloscope model for detailed
instructions on calibration.
Q: Can I use the digital multimeter probes for high-voltage
measurements?
A: It is recommended to use appropriate probes rated for
high-voltage measurements to ensure safety and accuracy. Using
probes not rated for high voltages can result in damage to the
equipment or injury.
Q: What is the maximum frequency output of the arbitrary
waveform generator?
A: The maximum frequency output varies by model. Please check
the specifications of your specific arbitrary waveform generator
model for details on its maximum frequency output.
“`
0101010101010101010101 0101010101010101010101 0101010101010101010101
0101010101010101010101 0101010101010101010101 0101010101010101010101
0101010101010101010101 0101010101010101010101 0101010101010101010101
0101010101010101010101 0101010101010101010101 0101010101010101010101
0101010101010101010101 0101010101010101010101 0101010101010101010101
0101010101010101010101 0101010101010101010101 0101010101010101010101
0101010101010101010101 D0ig1i0t1a0l 1O0s1c0il1lo0s1c0o1p0e1010101
0101010101010101010101 Wa0v1e0f1o0rm101G0e1n0e1r0a1t0o1r010101
Product Selection Guide 0101010101010101010101 RF01S0ig10n1a0l
1G0e1n0e1r0a1t0o1r010101
0101010101010101010101 S0p1e0c1t0r1u0m10A1n0a1l0y1z0e1r010101
01010101010101010101V0e1ctor0N10e1tw01o0r1k0A1n0a1l0y1z0e1r0101E0v1ery Bench.
0101010101010101010101 0D10C10P1o0w1e0r10S1u0p1p0l1y0101E0v1ery Engineer.
0101010101010101010101 D0C10E1l0e1c0tr1o0n1i0c1L0o1a0d10101E0v1ery Day.
Digital Multimeter Probes & Accessories
SIGLENT TECHNOLOGIES CO., LTD
Super Phosphor Oscilloscope
SDS7000A Series
SDS6000A Series
SDS7404A H12 (4 GHz) SDS7304A H12 (3 GHz)
Features and Benefits:
· 4 analog channels, up to 4 GHz bandwidth with up to 20 GSa/s sample rate ·
12-bit ADC · Low background noise: 220 Vrms @ 4 GHz bandwidth
SPO technology · Waveform capture rates up to 1,000,000 wfm/s · Supports
256-level intensity grading and color temperature display modes · 500 Mpts/ch
standard, 1 Gpts/ch optional · Digital trigger system · Intelligent trigger:
Edge, Slope, Pulse, Window, Runt, Interval, Dropout, Pattern, Qualified, Nth
edge, Setup/hold, Delay and Video (HDTV supported). Zone Trigger simplifies
advanced triggering · Serial bus triggering and decoder, supports protocols
I2C, SPI, UART, CAN, LIN, CAN FD, FlexRay, I2S, MIL-STD-1553B, SENT,
Manchester, ARINC429 and USB 2.0 · Segmented acquisition (Sequence) mode,
dividing the maximum record length into multiple segments (up to 124,000),
according to trigger conditions set by the user, with a very small dead time
between segments to capture the qualifying event · History waveform record
(History) function, the maximum recorded waveform length is 124,000 frames ·
Automatic measurements on 50+ parameters, supports statistics with histogram,
track, trend, Gating measurement, and measurements on Math, History and Memory
traces · 4 Math traces (32 Mpts FFT, Filter, addition, subtraction,
multiplication, division, integration, differential, square root, etc.),
supports formula editor · Abundant data analysis functions such as Search,
Navigate, SignalScan, Digital Voltmeter, Counter, Waveform Histogram, Bode
plot, Power Analysis, Eye/Jitter Analysis and Compliance Test · High Speed
hardware-based Average, Hi-Res; High Speed hardware-based Mask Test function,
with Mask Editor tool for creating user-defined masks · 16 digital channels
(optional) · Built-in 50 MHz waveform generator · Large 15.6″ HD TFT-LCD
display with 1920 * 1080 resolution; Capacitive touch screen supports multi-
touch gestures · Interfaces include: 4x USB Host 3.1 Gen 1, 2x USB 3.0 Host,
USB 2.0 Device, 2x 1000M LAN, DVI-D, DP 1.2, HDMI 1.4, Audio, External Triger
In, Aux Out (Pass/Fail, Trigger Out), 10 MHz In, 10 MHz Out · Built-in web
server supports remote control over the LAN port using a web browser. Supports
SCPI remote control commands. Supports external mouse and keyboard
SDS6204A (2 GHz) SDS6104A (1 GHz) SDS6054A (500 MHz)
Features and Benefits:
· 4 analog channels, up to 2 GHz bandwidth with 5 GSa/s (10 GSa/s ESR) sample
rate at each channel
· Low background noise, supports 0.5 mV/div to 10 V/div vertical scales · SPO
technology
· Waveform capture rates up to 170,000 wfm/s (normal mode), and 750,000 wfm/s
(sequence mode)
· Supports 256-level intensity grading and color temperature display modes ·
500 Mpts Record length in total for all 4 channels · Digital trigger system ·
Intelligent trigger: Edge, Slope, Pulse, Window, Runt, Interval, Dropout,
Pattern, Qualified, Nth edge, Setup/hold, Delay and Video (HDTV supported).
Zone Trigger simplifies advanced triggering · Serial bus triggering and
decoder, supports protocols I2C, SPI, UART, CAN, LIN, CAN FD, FlexRay, I2S,
MIL-STD-1553B, SENT and Manchester · Segmented acquisition (Sequence) mode,
dividing the maximum record length into multiple segments (up to 80,000),
according to trigger conditions set by the user, with a very small dead time
between segments to capture the qualifying event · History waveform record
(History) function, the maximum recorded waveform length is 80,000 frames ·
Automatic measurements on 50+ parameters, supports statistics with histogram,
track, trend, Gating measurement, and measurements on Math, History and Ref ·
4 Math traces (8 Mpts FFT, addition, subtraction, multiplication, division,
integration, differential, square root, etc.), supports formula editor ·
Abundant data analysis functions such as Search, Navigate, Digital Voltmeter,
Counter, Waveform Histogram, Bode plot, Power Analysis and Eye/Jitter Analysis
· High Speed hardware-based Average, Hi-Res; High Speed hardware-based Mask
Test function, with Mask Editor tool for creating user-defined masks · 16
digital channels (optional) · 25 MHz function / arbitrary waveform generator,
built-in multiple predefined waveforms · Large 12.1″ TFT-LCD display with 1280
- 800 resolution; Capacitive touch screen supports multi-touch gestures · Interfaces include: USB Hosts, USB Device (USBTMC), LAN (VXI-11/Telnet/ Socket), micro SD card, Pass/Fail, Trigger Out, HDMI · Built-in web server supports remote control over the LAN port using a web browser. Supports SCPI remote control commands. Supports external mouse and keyboard
www.siglent.com 1
Super Phosphor Oscilloscope
SDS6000L Series
SDS5000X Series
SDS6208L (2 GHz) SDS6108L (1 GHz) SDS6058L (500 MHz)
SDS6204L (2 GHz) SDS6104L (1 GHz) SDS6054L (500 MHz)
Features and Benefits:
· 8/4 analog channels + 1 external trigger. Designed for expansion. Combine
multiple units for a high-speed acquisition system with up to 512 channels.
· Up to 2 GHz bandwidth with 5 GSa/s (10 GSa/s ESR) sample rate at each
channel
· Low background noise, supports 0.5 mV/div to 10 V/div vertical scales · SPO
technology
· Waveform capture rates up to 170,000 wfm/s (normal mode), and 750,000 wfm/s
(sequence mode)
· Supports 256-level intensity grading and color temperature display modes ·
500 Mpts Record length in total for all 4 channels · Digital trigger system ·
Intelligent trigger: Edge, Slope, Pulse, Window, Runt, Interval, Dropout,
Pattern, Qualified, Nth edge, Setup / hold, Delay and Video (HDTV supported).
Zone Trigger simplifies advanced triggering · Serial bus triggering and
decoder, supports protocols I2C, SPI, UART, CAN, LIN, CAN FD, FlexRay, I2S,
MIL-STD-1553B, SENT and Manchester · Segmented acquisition (Sequence) mode,
dividing the maximum record length into multiple segments (up to 80,000),
according to trigger conditions set by the user, with a very small dead time
between segments to capture the qualifying event · History waveform record
(History) function, the maximum recorded waveform length is 80,000 frames ·
Automatic measurements on 50+ parameters, supports statistics with histogram,
track, trend, Gating measurement, and measurements on Math, History, Memory
and Ref · 4 Math traces (8 Mpts FFT, addition, subtraction, multiplication,
division, integration, differential, square root, etc.), supports formula
editor · Abundant data analysis functions such as Search, Navigate, Digital
Voltmeter, Counter, Waveform Histogram, Power Analysis and Eye/Jitter Analysis
· 16 digital channels (optional) · 25 MHz function / arbitrary waveform
generator, built-in multiple predefined waveforms · Interfaces include: 4x USB
Hosts, USB Device (USBTMC), 1000M LAN (VXI11/ Telnet/ Socket), micro SD card,
Pass/Fail, Trigger Out, HDMI, 10MHz In, 10MHz Out · Built-in web server
supports remote control over the LAN port using a web browser. Supports SCPI
remote control commands. Supports external mouse and keyboard
www.siglent.com 2
SDS5104X (1 GHz) SDS5054X (500 MHz) SDS5034X (350 MHz)
Features and Benefits:
· 1 GHz, 500 MHz, 350 MHz models with real-time sample rate up to 5 GSa/s ·
SPO technology
· Waveform capture rates up to 110,000 wfm/s (normal mode), and 500,000 wfm/s
(sequence mode)
· Supports 256-level intensity grading and color temperature display modes ·
Record length up to 250 Mpts/ch, 500 Mpts in total for all 4 channels ·
Digital trigger system · Intelligent trigger: Edge, Slope, Pulse, Window,
Runt, Interval, Dropout, Pattern, Qualified, Nth edge, Setup/hold, Delay and
Video (HDTV supported). Trigger zone helps to simplify advanced triggering ·
Serial bus triggering and decoder, supports protocols I2C, SPI, UART, CAN,
LIN, CAN FD, FlexRay, I2S and MIL-STD-1553B, SENT and Manchester · Low
background noise, supports 0.5 mV/div to 10 V/div voltage scales · Segmented
acquisition (Sequence) mode, dividing the maximum record length into multiple
segments (up to 100,000), according to trigger conditions set by the user,
with a very small dead time between segments to capture the qualifying event ·
History waveform record (History) function, the maximum recorded waveform
length is 100,000 frames · Automatic measurement function on 50+ parameters,
supports statistics with histogram,trend, Gating measurement, Math
measurement, History measurement and Ref measurement · Math function (2 Mpts
FFT, addition, subtraction, multiplication, division, integration,
differential, square root, etc.), supports formula editor Abundant data
analysis functions such as Search, Navigate, Digital Voltmeter, Counter,
Waveform Histogram, Bode plot and Power Analysis · High Speed hardware-based
Average, ERES (Enhanced Resolution) · High Speed hardware-based Mask Test
function, with Mask Editor tool for creating user-defined masks · 16 digital
channels (optional) with sample rate up to 1.25 GSa/s, record length up to
62.5 Mpts · 25 MHz function / arbitrary waveform generator, built-in multiple
predefined waveforms · Large 10.1″ TFT-LCD display with 1024 * 600 resolution;
Capacitive touch screen supports multi-touch gestures · Supports external
mouse and keyboard · 10 types of one-button shortcuts · Multiple interfaces:
USB Host, USB Device (USBTMC), LAN (VXI-11, telnet, socket, web), Pass/Fail,
Trigger Out, 10 MHz In, 10 MHz Out, VGA output · Built-in web server supports
remote control by the LAN port using a web browser · Supports SCPI remote
control commands
Super Phosphor Oscilloscope
SDS3000X HD Series
SDS2000X HD Series
SDS3104X HD (1 GHz) SDS3054X HD (500 MHz) SDS3034X HD (350 MHz)
SDS2354X HD (350 MHz) SDS2204X HD (200 MHz) SDS2104X HD (100 MHz)
Features and Benefits:
· 4 analog channels, up to 1 GHz bandwidth with up to 4GSa/s sample rate ·
12-bit ADC · Low background noise: 125 Vrms @ 1 GHz bandwidth · SPO technology
· Waveform capture rates up to 200,000 wfm/s in Normal mode and 890,000 wfm/s
in Sequence mode
· Supports 256-level intensity grading and color temperature display modes ·
Up to 400 Mpts/ch record length · Digital trigger system · Intelligent
trigger: Edge, Slope, Pulse, Window, Runt, Interval, Dropout, Pattern,
Qualified, Nth edge, Setup/hold, Delay and Video (HDTV supported). Zone
Trigger simplifies advanced triggering · Serial bus triggering and decoder,
supports protocols I2C, SPI, UART, CAN, LIN, CAN FD, FlexRay, I2S, MIL-STD-
1553B, SENT, Manchester and ARINC429 · Segmented acquisition (Sequence) mode,
dividing the maximum record length into multiple segments (up to 80,000),
according to trigger conditions set by the user, with a very small dead time
between segments to capture the qualifying event · History waveform record
(History) function, the maximum recorded waveform length is 80,000 frames ·
Automatic measurements on 50+ parameters, supports statistics with histogram,
track, trend, Gating measurement, and measurements on Math, History and Memory
traces · 4 Math traces (4 Mpts FFT, Filter, addition, subtraction,
multiplication, division, integration, differential, square root, etc.),
supports formula editor · Abundant data analysis functions such as Search,
Navigate, Digital Voltmeter, Counter, Waveform Histogram, Bode plot and Power
Analysis · High Speed hardware-based Average, ERES; High Speed hardware-based
Mask Test function, with Mask Editor tool for creating user-defined masks · 16
digital channels (optional) · External 50 MHz waveform generator (optional) ·
Large 10.1″ TFT-LCD display with 1024 * 600 resolution; Capacitive touch
screen supports multi-touch gestures · Interfaces include: 2x USB 3.0 Host, 1x
USB 2.0 Host , USB 3.0 Device (USBTMC), 1000M LAN
((VXI-11/Telnet/Socket/LXI)), External Triger In, Aux Out (Pass/Fail, Trigger
Out) · Built-in web server supports remote control over the LAN port using a
web browser. Supports SCPI remote control commands. Supports external mouse
and keyboard
Features and Benefits:
· 12-bit High Resolution · 12-bit Analog-Digital Convertors with sample rate
up to 2 GSa/s · Front ends with 70 Vrms noise floor @ 500 MHz bandwidth and
0.5% DC gain accuracy
· 4 analog channels, up to 350 MHz bandwidth (upgradable to 500 MHz) · SPO
technology
· Waveform capture rate up to 100,000 wfm/s (normal mode), and 500,000 wfm/s
(sequence mode)
· Supports 256-level intensity grading and color temperature display modes ·
Up to 200 Mpts/ch record length · Digital trigger system · Intelligent
trigger: Edge, Slope, Pulse, Window, Runt, Interval, Dropout, Pattern,
Qualified, Nth edge, Setup/hold, Delay and Video (HDTV supported). Zone
Trigger simplifies advanced triggering · Serial bus triggering and decoder,
supports protocols I2C, SPI, UART, CAN, LIN, CAN FD, FlexRay, I2S, MIL-STD-
1553B, SENT and Manchester · Segmented acquisition (Sequence) mode, dividing
the maximum record length into multiple segments (up to 80,000), according to
trigger conditions set by the user, with a very small dead time between
segments to capture the qualifying event · History waveform record (History)
function, the maximum recorded waveform length is 80,000 frames · Automatic
measurements on 50+ parameters, supports statistics with histogram, track,
trend, Gating measurement, and measurements on Math, History and Ref · 2 Math
traces (2 Mpts FFT, addition, subtraction, multiplication, division,
integration, differential, square root, etc.), supports formula editor ·
Abundant data analysis functions such as Search, Navigate, Digital Voltmeter,
Counter, Waveform Histogram, Bode plot and Power Analysis · High Speed
hardware-based Average, ERES; High Speed hardware-based Mask Test function,
with Mask Editor tool for creating user-defined masks · 16 digital channels
(optional) · Built-in 25 MHz waveform generator · Large 10.1″ TFT-LCD display
with 1024 * 600 resolution; Capacitive touch screen supports multi-touch
gestures · Interfaces include: USB Hosts, USB Device (USBTMC), LAN
(VXI-11/Telnet/ Socket), Pass/Fail, Trigger Out · Built-in web server supports
remote control over the LAN port using a web browser. Supports SCPI remote
control commands. Supports external mouse and keyboard
www.siglent.com 3
Super Phosphor Oscilloscope
SDS2000X Plus Series
SDS2000X-E Series
SDS2354X Plus (350 MHz) SDS2204X Plus (200 MHz) SDS2104X Plus / SDS2102X Plus
(100 MHz)
Features and Benefits:
· 350 MHz, 200 MHz, 100 MHz models with real-time sample rate up to 2 GSa/s. A
500 MHz bandwidth upgrade option is available for 350 MHz models.
· SPO technology · Waveform capture rates up to 120,000 wfm/s (normal mode)
and 500,000 wfm/s (sequence mode) · Supports 256-level intensity grading and
color temperature display modes · Record length up to 200 Mpts/ch, 400 Mpts in
total for all 4 channels · Digital trigger system
· Intelligent trigger: Edge, Slope, Pulse, Window, Runt, Interval, Dropout,
Pattern and Video (HDTV supported). Trigger zone helps to simplify advanced
triggering
· Serial bus triggering and decoder, supports I2C, SPI, UART, CAN, LIN
(Standard) and CAN FD, FlexRay, I2S, and MIL-STD-1553B, SENT and Manchester
(optional) protocols
· Low background noise, features 0.5 mV/div to 10 V/div voltage scales ·
10-bit mode provides higher resolution and lower noise · Segmented acquisition
(Sequence) mode, dividing the maximum record
length into multiple segments (up to 90,000), according to trigger conditions
set by the user, with a very small dead time between segments to capture the
qualifying event · History waveform record (History) function for up to 90,000
triggered waveforms (frames) · Automatic measurement function on 50+
parameters, supports statistics with histogram and trend · Two Math traces,
support 2 Mpts FFT, +, -, x, ÷, d/dt, dt, , average, ERES, and formula editor
· Abundant data processing and analysis functions such as Search, Navigate,
Mask Test, Bode plot, Power Analysis (optional) and Counter · 16 digital
channels (optional) · Built-in 50 MHz waveform generator (optional) · Large
10.1″ TFT-LCD display with 1024×600 resolution; Capacitive touch screen
supports multi-touch gestures · Multiple interfaces: USB Host, USB Device
(USBTMC), LAN(VXI-11/Telnet/ Socket), Pass/Fail, Trigger Out · Built-in web
server supports remote control by the LAN port using a web browser; Supports
SCPI remote control commands
SDS2352X-E (350 MHz) SDS2202X-E (200 MHz)
Features and Benefits:
· Real-time sampling rate up to 2 GSa/s (1 GSa/s per channel, if both channels
active)
· Intelligent trigger: Edge, Slope, Pulse Width, Window, Runt, Interval, Time
out (Dropout), Pattern
· Serial bus triggering and decoding (standard), supports protocols IIC, SPI,
UART, CAN, LIN
· Video trigger, supports HDTV · Low background noise with voltage scales from
500 V/div to 10 V/div · 10 types of one-button shortcuts, supports Auto Setup,
Default, Cursors,
Measure, Roll, History, Display/Persist, Clear Sweep, Zoom and Print ·
Segmented acquisition (Sequence) mode, divides the maximum record length
into multiple segments (up to 80,000), according to trigger conditions set by
the user, with a very small dead time segment to capture qualifying events ·
History waveform record (history) function (maximum recorded waveform length
is 80,000 frames) · Automatic measurement function for 38 parameters as well
as Measurement Statistics, Zoom, Gating, Math, History and Reference functions
· 1 Mpts FFT · Math and measurement functions use all sampled data points in
memory (up to 28 Mpts) · Preset key can be customized for user settings or
factory “defaults” · Security Erase mode · High Speed hardware based Pass /
Fail function · Search and navigate · Large 7 inch TFT -LCD display with 800 *
480 resolution · Multiple interface types: USB Host, USB Device (USB -TMC),
LAN, Pass / Fail, Trigger Out · Supports SCPI remote control commands ·
VXI-11+SCPI, Telnet (port 5024) +SCPI and Socket (port 5025) +SCPI programming
over LAN · Supports web control and virtual instrument control panel for both
PC and mobile terminals · Web control update rate of up-to 10 times/s provides
nearly real-time update rate · Supports Multi-language display and embedded
online help
www.siglent.com 4
Super Phosphor Oscilloscope
SDS1000X HD Series
SDS800X HD Series
SDS1204X HD / SDS1202X HD (200 MHz) SDS1104X HD / SDS1102X HD (100 MHz)
Features and Benefits:
· 12-bit High Resolution · 12-bit Analog-Digital Convertors with sample rate
up to 2 GSa/s · Front ends with 70 Vrms noise floor @ 200 MHz bandwidth
· 2/4 analog channels, up to 200 MHz bandwidth · SPO technology
· Waveform capture rate up to 120,000 wfm/s (normal mode), and 500,000 wfm/s
(sequence mode)
· Supports 256-level intensity grading and color temperature display modes ·
Up to 100 Mpts record length · Digital trigger system · Intelligent trigger:
Edge, Slope, Pulse width, Window, Runt, Interval, Dropout, Pattern, Video
(HDTV supported) , Qualified, Nth edge, Delay, Setup/Hold time. · Serial bus
triggering and decoder, supports protocols I2C, SPI, UART, CAN, LIN, CAN
FD(decode only), FlexRay(decode only) · Segmented acquisition (Sequence) mode,
dividing the maximum record length into multiple segments (up to 80,000),
according to trigger conditions set by the user, with a very small dead time
between segments to capture the qualifying event · History waveform record
(History) function, the maximum recorded waveform length is 80,000 frames ·
Automatic measurements on 50+ parameters, supports statistics with histogram,
track, trend, Gating measurement, and measurements on Math, History and Ref ·
4 Math traces (2 Mpts FFT, addition, subtraction, multiplication, division,
integration, differential, square root, etc.), supports formula editor ·
Abundant data analysis functions such as Search, Navigate, Counter, Bode plot
and Power Analysis · High Speed hardware-based Mask Test function, with Mask
Editor tool for creating user-defined masks · 16 digital channels (optional) ·
25 MHz waveform generator(optional) · Large 10.1″ TFT-LCD display with 1024 *
600 resolution; Capacitive touch screen supports multi-touch gestures ·
Interfaces include: USB Hosts, USB Device (USBTMC), LAN (VXI-11/Telnet/
Socket), Pass/Fail, Trigger Out · Built-in web server supports remote control
over the LAN port using a web browser. Supports SCPI remote control commands.
Supports external mouse and keyboard
SDS824X HD / SDS822X HD (200 MHz) SDS814X HD / SDS812X HD (100 MHz) SDS804X HD
/ SDS802X HD (70 MHz)
Features and Benefits:
· 12-bit High Resolution · 12-bit Analog-Digital Convertors with sample rate
up to 2 GSa/s · Front ends with 70 Vrms noise floor @ 200 MHz bandwidth
· 2/4 analog channels, up to 200 MHz bandwidth · SPO technology
· Waveform capture rate up to 120,000 wfm/s (normal mode), and 500,000 wfm/s
(sequence mode)
· Supports 256-level intensity grading and color temperature display modes ·
Up to 100 Mpts record length · Digital trigger system · Intelligent trigger:
Edge, Slope, Pulse width, Window, Runt, Interval, Dropout, Pattern, Video
(HDTV supported) , Qualified, Nth edge, Delay, Setup/Hold time. · Serial bus
triggering and decoder, supports protocols I2C, SPI, UART, CAN, LIN ·
Segmented acquisition (Sequence) mode, dividing the maximum record length into
multiple segments (up to 80,000), according to trigger conditions set by the
user, with a very small dead time between segments to capture the qualifying
event · History waveform record (History) function, the maximum recorded
waveform length is 80,000 frames · Automatic measurements on 50+ parameters,
supports statistics with histogram, track, trend, Gating measurement, and
measurements on Math, History and Ref · 4 Math traces (2 Mpts FFT, addition,
subtraction, multiplication, division, integration, differential, square root,
etc.), supports formula editor · Abundant data analysis functions such as
Search, Navigate, Counter, Bode plot and Power Analysis · High Speed hardware-
based Mask Test function, with Mask Editor tool for creating user-defined
masks · 16 digital channels (optional) · 25 MHz waveform generator(optional) ·
7″ TFT-LCD display with 1024 * 600 resolution; Capacitive touch screen
supports multi-touch gestures · Interfaces include: USB Hosts, USB Device
(USBTMC), LAN (VXI-11/Telnet/ Socket), Pass/Fail, Trigger Out · Built-in web
server supports remote control over the LAN port using a web browser. Supports
SCPI remote control commands. Supports external mouse and keyboard. Supports
NTP.
www.siglent.com 5
Digital Storage Oscilloscope
SDS1000X-E Series
SDS1000DL+ / SDS1000CML+ Series
SDS1204X-E / SDS1202X-E (200 MHz) SDS1104X-E (100 MHz)
Features and Benefits:
· Two channel series have one 1 GSa/s ADC, four channel series have two 1
GSa/s ADCs. When all channels are enabled, each channel has a maximum sample
rate of 500 MSa/s. When a single channel per ADC is active, it has sampling
rate of 1 GSa/s
· The newest generation of SPO technology · Waveform capture rate up to
100,000 wfm/s (normal mode), and 400,000 wfm/s (sequence mode) · Supports
256-level intensity grading and color display modes · Record length up to 14
Mpts · Digital trigger system
· Intelligent trigger: Edge, Slope, Pulse Width, Window, Runt, Interval, Time
out (Dropout), Pattern
· Serial bus triggering and decoding (Standard), supports protocols IIC, SPI,
UART, RS232, CAN, LIN
· Segmented acquisition (Sequence) mode, divides the maximum record length
into multiple segments (up to 80,000), according to trigger conditions set by
the user, with a very small dead time segment to capture the qualifying event.
· 1 Mpts FFT · Math and measurement functions use all sampled data points (up
to 14 Mpts) · MSO, 16 digital channels (four channel series only, optional) ·
Search and navigate (four channel series only) · USB AWG module (four channel
series only, optional) · Bode plot (four channel series only)
SDS1152CML+ (150 MHz) SDS1102CML+ (100 MHz) SDS1072CML+ (70 MHz) SDS1052DL+
(50 MHz)
Features and Benefits
· 50 MHz, 70 MHz, 100 MHz, 150 MHz bandwidth models · Real-time sampling rate
up to 1 GSa/s, Equivalent-time sampling rate up to
50 GSa/s · Memory Depth up to 2 Mpts · Trigger types: Edge, Pulse, Video,
Slope, Alternate · Waveform math functions:+, -, , /, FFT · 6 digits
frequency counter · Supports Multi-language display and embedded online help ·
Screensaver from 1 minute to 5 hours · Digital filter and waveform recorder
function · 7 inch TFT-LCD display with 800 480 resolution
www.siglent.com 6
Handheld Oscilloscope
Arbitrary Waveform Generator
SDG7000A Series
SHS1000X/SHS800X Series
SHS1202X (200 MHz) SHS1102X (100 MHz) SHS820X (200 MHz) SHS810X (100 MHz)
Features and Benefits
· 200 MHz, 100 MHz bandwidth models · Sample rate of 1 GSa/s (single-channel),
Sample rate of 500 MSa/s (two-
channels) · The Siglent SPO technology
· Waveform capture rates up to 100,000 wfm/s (normal mode) and 400,000 wfm/s
(sequence mode)
· Supports 256-level intensity grading and color temperature display modes ·
Record length up to 12 Mpts · Digital trigger system · Intelligent trigger:
Edge, Slope, Pulse Width, Window, Runt, Interval, Time out (Dropout), Pattern
· Serial bus triggering and decoding (Standard) for IIC, SPI, UART, CAN, and
LIN protocols · Video trigger/HDTV · Low background noise with voltage scales
from 2 mV/div to 100 V/div · 3 one-button shortcuts for Oscilloscope,
Multimeter and Recorder functions · 8 one-button shortcuts for: Run/Stop, Auto
Setup, Default, Measure, Cursors, Display/Persist, Clear Sweep and Print. More
function shortcuts available when combined with the shift button · Segmented
acquisition (Sequence) mode, divides the maximum record length into multiple
segments (up to 80,000), according to trigger conditions set by the user, with
a very small dead time segment to capture the qualifying event · History
waveform record (History) function (maximum recorded waveform length is 80,000
frames) · Automatic measurement function for 38 parameters as well as
Measurement Statistics, Zoom, Gating, Math, History and Reference functions ·
1 Mpts FFT. Support Peaks and Markers · Math and measurement functions use all
sampled data points (up to 12 Mpts) · Math functions (FFT, addition,
subtraction, multiplication, division, integration, differential, square root)
· Default key can be customized for user settings or factory “defaults” ·
Supports Multi-language display and embedded online help · Security Erase mode
· Search and navigate function · Includes Recorder mode, including Sample and
Measurement Loggers · 6000 counts Digital Multimeter, Support DCV, ACV, DCI,
ACI, Resistance, Diode, Capacitance, Continuity test. · True RMS AC
Voltage/Current measurement multimeter · 5.6-inch TFT-LCD display with 640 *
480 resolution · Interface types: Isolated USB Host, USB Device (MicroUSB
-TMC) · Supports SCPI remote control commands · UL2054 certified lithium
battery pack, 6900 mAh capacity, external charger · IP Rating: IP51 ·
Compliance with UL61010-1, UL61010-2-030, UL61010-2-033
SDG7102A (1 GHz) SDG7052A (500 MHz) SDG7032A (350 MHz) Features and Benefits
· Dual channel differential/single-ended output, 16-bit LVDS/LVTTL digital bus
output
· High-performance sampling system with 5 GSa/s sample rate and 14 -bit
vertical resolution
· 1 GHz maximum bandwidth · Generates arbitrary waveform with sample rates of
0.01 Sa/s ~ 2.5 GSa/s,
with maximum memory depth of 512 Mpts, and provides segment editing / playback
functions · Generates vector signals with up to 500 MS/s symbol rate ·
Generates low jitter pulses with 1 ns minimum pulse width and 500 ps minimum
edge · Up to 1 GHz bandwidth White Gaussian Noise and the bandwidth is
adjustable · Supports PRBS up to 312.5 Mbps · The digital bus can output
digital signals up to 1 Gbps. · Supports analog/digital modulation, sweeping
and bursting · Enhanced dual channel operation functions: inter channel
tracking, coupling and copying; Dual channel superposition function; Supports
mutual modulation between channels · The 24 Vpp analog output is superimposed
with ± 12 Vdc offset to provide a maximum output range of ± 24 V (48 V) · High
precision Frequency Counter · 5-inch capacitive touch screen with resolution
of 800×480; Supports external mouse and keyboard operation; Supports WebServer
to control the instruments remotely · Supports multiple interfaces: 10 MHz In,
10 MHz Out, Trigger In/Out, Markers etc · Supports SCPI command for easy
integration into test systems
www.siglent.com 7
Function/Arbitrary Waveform Generator
SDG6000X Series
SDG2000X Series
SDG6052X (500 MHz) SDG6032X (350 MHz) SDG6022X (200 MHz)
SDG2122X (120 MHz) SDG2082X (80 MHz) SDG2042X (40 MHz)
Features and Benefits
· Innovative TrueArb and EasyPulse technology · Dual-Channel, 500 MHz maximum
bandwidth, 20 Vpp maximum output
amplitude, high fidelity output with 80 dB dynamic range · High-performance
sampling system with 2.4 GSa/s sampling rate and 16-bit
vertical resolution · Multi-function signal generator, meeting requirements in
wide range,
Continuous Wave Generator, Pulse Generator, Function Arbitrary Waveform
Generator, IQ Signal Generator (optional), Noise Generator, PRBS Generator ·
Sweep and Burst function · Harmonics function · Waveform Combining function ·
Channel Coupling, Copy and Tracking function · 196 built-in arbitrary
waveforms · High precision Frequency Counter · Standard interfaces include:
USB Host, USB Device (USBTMC), LAN (VXI-11, Socket, Telnet), GPIB (Optional) ·
4.3″ touch screen display for easier operation
Features and Benefits
· Dual-channel, 120 MHz maximum bandwidth, 20 Vpp maximum output amplitude,
high fidelity output with 80 dB dynamic range
· High-performance sampling system with 1.2 GSa/s sampling rate and 16-bit
vertical resolution. No detail in your waveforms will be lost
· Innovative TrueArb technology, based on a point-by-point architecture,
supports any 8 pts~8 Mpts Arb waveform with a sampling rate in range of 1
Sa/s~75 MSa/s
· Innovative EasyPulse technology, capable of generating lower jitter Square
or Pulse waveforms, brings a wide range and extremely high precision in pulse
width and rise/fall time adjustments
· Sweep and Burst function; Harmonics mode supported · 4.3″ touch screen
display for easier operation
www.siglent.com 8
Function/Arbitrary Waveform Generator Programmable Switching DC Power Supply
SDG1000X Series
SDG1062X (60 MHz) SDG1032X (30 MHz) Features and Benefits
· 150 MSa/s sampling rate, 14-bit vertical resolution, and 16 kpts waveform
length
· Innovative TrueArb and EasyPulse technology · Special circuit for Square
wave function, can generate Square waves up to 60
MHz with jitter less than 300 ps+0.05 ppm of period · Plenty of analog and
digital modulation types: AM, DSB-AM, FM, PM, FSK,
ASK, PSK and PWM, Sweep and Burst functions · Waveform Combining function ·
High precision Frequency Counter · Standard interfaces: USB Host, USB Device
(USBTMC), LAN (VXI-11) · Optional interface: GPIB
SDG800 Series
SDG830 (30 MHz) SDG810 (10 MHz) Features and Benefits
· Advanced DDS technology, 3.5 inch color TFT-LCD · 125 MSa/s sampling rate,14
bit vertical resolution,16 Kpts max wave length · 5 types of standard
waveforms, built-in 46 types of arbitrary waveforms, sync
signal output, 1 Hz frequency resolution · Complete modulation functions: AM
,DSB-AM, FM, PM, FSK, ASK, PWM, linear/
logarithmic sweep and burst · Innovative EasyPulse technology, can output
pulse of low jitter, quick rising/
falling edge · Support USB-TMC protocol and SCPI programming command control ·
Arbitrary waveform edit software, provides lots of painting method, capable
of edit complicate waveform quickly and precisely
SPS5000X Series
SPS5161X (160 V, 7.5 A) SPS5162X (160 V, 15 A) SPS5163X (160 V, 22.5 A) SPS5164X (160 V, 7.5 A) SPS5165X (160 V, 7.5 A) SPS5051X (50 V, 10 A) SPS5041X (40 V, 30 A) SPS5042X (40 V, 60 A) SPS5043X (40 V, 90 A) SPS5044X (40 V, 30 A) SPS5045X (40 V, 30 A)
SPS5081X (80 V, 15 A) SPS5082X (80 V, 30 A) SPS5083X (80 V, 45 A) SPS5084X (80 V, 15 A) SPS5085X (80 V, 15 A)
Features and Benefits
· Rated Output Voltage: 40 V, 50 V, 80 V, 160 V · Rated Output Power: 180 W,
360 W, 720 W, 1080 W · Wide range of output voltage and current, high
efficiency power supply · CV, CC priority mode selection, better protection of
equipment under test · Load transient recovery time (Load change from 50~100%)
<1 ms · Adjustable slew rate of output voltage and current · Setting and
readback resolution: 1 mV, 1 mA · User enabled internal output discharge
circuit to accelerate the down
programming of the output voltage · Remote Voltage Sensing · List function up
to 50 steps; can be created from the front panel or by
importing list sequence files from a USB memory device · External analog
voltage and resistor control of voltage or current output · External voltage
and current monitoring output · OVP, OCP, LPP, OTP protection. · 2.4-inch OLED
high brightness liquid crystal display, 170-degree viewing angle · Standard
Interface: USB, LAN, Analog Control Interface · Optional Interface: USB-GPIB
module · 1/2, 1/3, 1/6 rack mount size · Embedded Web Server offers remote
control through a web browser without
the need for the driver or software
www.siglent.com 9
Programmable Linear DC Power Supply Programmable Linear DC Power Supply
SPD3303X Series
SPD3303X-E (10 mv, 10 mA) SPD3303X (1 mv, 1 mA)
Features and Benefits
· 3 independent controlled and isolated outputs, 32 V/3.2 A×2, 2.5 V/3.3 V/5
V/3.2 A×1, total 220 W
· 5 digits Voltage, 4 digits Current Display, Minimum Resolution: 1 mV/1 mA
(SPD3303X)
· Supports front panel timing output functions · 4.3 inch true color TFT- LCD
480×272 display · 3 types of output modes: independent, series, parallel · 100
V/120 V/220 V/230 V compatible design to meet the needs of different
power grids · Intelligent temperature-controlled fan, effectively reducing
noise · Clear graphical interface, with the waveform display function ·
Internal 5 groups of system parameter save/recall, supports data storage
space expansion · Provides PC software: Easypower, supports SCPI, LabView
driver
SPD1000X Series
SPD1168X (16 V/8 A) SPD1305X (30 V/5 A)
Features and Benefits
· Single path high-precision programmable voltage output 16 V/8 A, total power
up to 128 W 30 V/5 A, total power up to 150 W
· Stable, reliable, Low ripple and noise 350 uVrms/3 mVpp; < 2 mArms · Fast
transient response time: < 50 s · 5 digit Voltage, 4 digit Current Display,
Minimum Resolution: 1 mV/1 mA · Supports front panel timing output functions ·
2.8 inch true color TFT- LCD 240 *320 display · 2 types of output modesTwo-
wire output mode, 4-wire compensation output
mode, Maximum compensation voltage 1 V · 100/120/220/230 V compatible design
to meet the needs of different power
grids · Intelligent temperature-controlled fan reduces noise · Clear graphical
interface, with the waveform display function · Internal 5 groups of system
parameter save/recall · Includes PC software: Easypower, supports SCPI,
LabView driver
SPD3303C Series
SPD3303C (10 mv,10 mA)
Features and Benefits
· 3 independent controlled and isolated output: 32 V/3.2 A×2, 2.5 V/3.3 V/ 5
V/3.2 A×1, total power 220 W
· Resolution: 10 mV/10 mA · Supports panel timing output functions · LED
display; 32 V full scale, 4 digits; 3.2 A full scale, 3 digits · 100 V/120
V/220 V/230 V compatible design, to meet the needs of different
power grids · Intelligent fan for temperature control, effectively reduces
noise · Five groups of internal system parameter storage. Supports data
storage
space expansion · Supports SCPI commands & USB device interface. Includes PC
software
www.siglent.com 10
Programmable DC Electronic Load
Digital Multimeter
SDL1000X Series
SDL1030X/X-E (300 W) SDL1020X/X-E (200 W)
Features and Benefits
· SDL1020X (Single channel ): DC 150 V/30 A, total power up to 200 W ·
SDL1030X (Single channel ): DC 150 V/30 A, total power up to 300 W · 4 static
modes / Dynamic mode: CC/CV/CR/CP · CC Dynamic mode: Continuous, pulsed,
toggled · CC Dynamic mode: 25 kHz, CP Dynamic mode: 12.5 kHz, CV Dynamic mode:
0.5 Hz · Measuring speed of voltage and current: up to 500 kHz · Adjustable
current rise time range: 0.001 A/us~2.5 A/us · Min. readback resolution: 0.1
mV, 0.1 mA · Short-circuit, Battery test, CR-LED mode, and factory test
functions · 4-wire SENSE compensation mode function · List function supports
editing as many as 100 steps · Program function supports 50 groups of steps ·
OCP, OVP, OPP, OTP and LRV protection · External analog control · Voltage,
Current monitoring via 0-10 V · 3.5 inch TFT-LCD display, capable of
displaying multiple parameters and
states simultaneously · Built-in RS232/USB/LAN communication interface, USB-
GPIB module
(optional) · Waveform trend chart and ease-to-use file storage and call
functions · Includes PC software: Supports SCPI, LabView driver
SDM3065X Series
SDM3065X SDM3065X-SC (with Scanner Card)
Features and Benefits
· 4.3″ TFT-LCD, 480*272 · Real 6½ digits readings resolution (2,200,000
counts) · 1Gb Nand flash size, Mass storage configuration files and data files
· True-RMS AC Voltage and AC Current measuring · Supports double display,
Chinese and English Menu · File management (support for U-disc and local
storage) · Built-in cold terminal compensation for thermocouple · Comes with
easy, converient and flexble any sensor measurement control
software: EasyDMM · Standard interfaces: USB Device, USB Host, LAN (Optional
Accessories: USB-
GPIB Adapter) · Scanner Card SC1016 (Only for SDM3065X-SC) · Built-in Hlep
system makes information acquisition easier · Support remote control operation
via SCPI commands. Compatible with
commands of other main stream multimeters · Supports intelligent management
system for laboratory based on BS
framework and LAN
SDM3055 Series
SDM3055 SDM3055-SC (with Scanner Card)
Features and Benefits
· Real 5½ digits readings resolution ( 240, 000 counts ) · Up to 150 rdgs/s
measurement speed · True-RMS AC Voltage and AC Current measuring · 1 Gb Nand
flash size, Mass storage configuration files and data files · Built-in cold
terminal compensation for thermocouple temperature
measurements · With easy, convenient and flexible PC software: EasyDMM
standard interfaces: USB Host, LAN ( Optional Accessories USB-GPIB Adapter ) ·
Scanner Card SC1016 ( Only for SDM3055-SC ) · Support remote control operation
via SCPI commands.Compatible with
commands of main stream multimeters www.siglent.com 11
Digital Multimeter
Vector Network Analyzer
SDM3045X Series
SDM3045X
Features and Benefits
· Real 4½ digit (60000 counts) readings resolution · Up to 150 rdgs/s
measurement speed · True-RMS AC Voltage and AC Current measuring · 1 Gb NAND
flash size, Mass storage configuration files and data files · Built-in cold
terminal compensation for thermocouple · With easy, convenient and flexible PC
software: EasyDMM · Standard interface: USB Device, USB Host, LAN (Optioanal
Accessories:
USB-GPIB Adapter) · USB & LAN remote interfaces support common SCPI command
set.
Compatible with other popular DMMs on the market
SNA5000A Series
SNA5032A (100 kHz~26.5 GHz) SNA5022A (100 kHz~13.5 GHz) SNA5014A (9 kHz~8.5
GHz) SNA5004A (9 kHz~4.5 GHz) SNA5012A (9 kHz~8.5 GHz) SNA5002A (9 kHz~4.5
GHz)
Features and Benefits:
· Frequency range: 9 kHz~8.5 GHz and 100 kHz~26.5 GHz · Frequency resolution:
1 Hz · Level resolution: 0.05 dB · Range of IFBW: 10 Hz~3 MHz · Setting range
of output level: -55 dBm ~ +10 dBm · Dynamic range: 125 dB · Types of
calibration: Response calibration, Enhanced Response calibration,
Full-one portcalibration, Full-two port calibration, Full-three port
calibration, Full-four port calibration, TRL calibration · Types of
measurement: Scattering-parameter measurement, differential-parameter
measurement,receiver measurement, time-domain parameter analysis, limit test,
ripple test, impedance conversion, fixture simulation, adapter
removal/insertion, enhanced time-domain parameter analysis (TDR), spectrum
analysis, frequency offset, scalar mixer measurement · Support Bias-Tees ·
Interface: LAN, USB Device, USB Host(USB-GPIB) · Remote control:
SCPI/Labview/IVI based on USB-TMC/VXI-11/Socket/Telnet/ WebServer · 12.1-inch
touch screen · Video output: HDMI
www.siglent.com 12
Switch Matrix
Mechanical Switch
SSM5000A Series
SSM5342A (100 kHz~26.5 GHz) SSM5321A (100 kHz~26.5 GHz) SSM5144A (9 kHz~9 GHz)
SSM5142A (9 kHz~9 GHz) SSM5124A (9 kHz~9 GHz) SSM5122A (9 kHz~9 GHz)
Features and Benefits:
· Characteristic impedance: 50 · Highest frequency: 9 GHz (or 26.5 GHz) ·
Maximum number of input ports: 4 · Maximum number of output ports: 24 · RF
connector: 3.5 mm female · Maximum input power: 20 dBm · Maximum input DC
voltage: 35 V · Interface: LAN, USB Device, Direct Control (in), Direct
Control (out) Screen
size: 2.4-inch
SSU5000A Series
SSU5504A (DC~50 GHz) SSU5503A (DC~50 GHz) SSU5502A (DC~50 GHz) SSU5501A (DC~50
GHz) SSU5266A (DC~26.5 GHz) SSU5265A (DC~26.5 GHz) SSU5264A (DC~26.5 GHz)
SSU5263A (DC~26.5 GHz) SSU5262A (DC~26.5 GHz) SSU5261A (DC~26.5 GHz) SSU5184A
(DC~18 GHz) SSU5183A (DC~18 GHz) SSU5182A (DC~18 GHz) SSU5181A (DC~18 GHz)
Features and Benefits:
· Maximum frequency: 18 GHz/ 26.5 GHz/ 50 GHz · 1 to 4 SPDT switches or 1 to 2
SP6T switch configurations · SCPI Controllable via VISA and EasySSU software ·
USB Connectivity · Size: WxHxD=153×62.4×137.5 mm · RF connector: SMA female or
2.4 mm female
www.siglent.com 13
Spectrum Analyzer
Spectrum Analyzer
SSA5000A Series
SSA5085A (9 kHz~26.5 GHz) SSA5083A (9 kHz~13.6 GHz)
Features and Benefits:
· Spectrum Analyzer Frequency Range from 9 kHz up to 13.6 GHz/26.5 GHz · -165
dBm/Hz Displayed Average Noise Level (Typ.) · -105 dBc/Hz@1 GHz,10 kHz offset
SSB Phase Noise (Typ.) · 25 MHz/40 MHz Analysis Bandwidth · 100% POI 7.20 s,
Dynamic Range 60 dB, Multi-view for Density, Spectrogram
and PvT · Channel power, ACPR, OBW, Harmonic, TOI measurement etc. · Analog
Modulation Analysis and Vector Digital Modulation Analysis · 12.1 inch Multi-
Touch Screen, HDMI output · Web Browser Remote Control on PC and Mobile
Terminals and File Operation
SSA3000X Plus Series
SSA3075X Plus (9 kHz~7.5 GHz) SSA3032X Plus (9 kHz~3.2 GHz) SSA3021X Plus (9
kHz~2.1 GHz) SSA3015X Plus (9 kHz~1.5 GHz)
Features and Benefits:
· -165 dBm/Hz Displayed Average Noise Level (Typ.) · -98 dBc/Hz.@10 kHz Offset
Phase Noise (1 GHz, Typ.) · Level Measurement Uncertainty < 0.7 dB (Typ.) · 1
Hz Minimum Resolution Bandwidth (RBW) · Preamplifier Standard · Tracking
Generator · Analog and Digital Signal Modulation Analysis Mode (Opt.) · EMI
Filter and Quasi-Peak Detector Kit(Opt.) · 10.1 lnch Multi-Touch Screen ,
Mouse and Keyboard supported · Web Browser Remote Control on PC and Mobile
Terminals and File Operation
www.siglent.com 14
SSA3000X Series
SSA3032X (9 kHz~3.2 GHz) SSA3021X (9 kHz~2.1 GHz)
Features and Benefits:
· -161 dBm/Hz Displayed Average Noise Level (Typ.) · -98 dBc/Hz @10 kHz Offset
Phase Noise (1 GHz, Typ.) · Total Amplitude Accuracy < 0.7 dB · 1 Hz Minimum
Resolution Bandwidth (RBW) · Preamplifier Standard · Up to 3.2 GHz Tracking
Generator (Standard) · Reflection Measurement Kit (Opt.) · Advanced
Measurement Kit (Opt.) · EMI Pre-compliance Measurements Kit (Opt.) · 10.1
lnch WVGA (1024×600) Display
Real-Time Spectrum Analyzer
Handheld Spectrum Analyzer
SSA3000X-R Series
SSA3075X-R (9 kHz~7.5 GHz) SSA3050X-R (9 kHz~5.0 GHz) SSA3032X-R (9 kHz~3.2
GHz)
Features and Benefits:
· -165 dBm/Hz Displayed Average Noise Level (Typ.) · -98 dBc/Hz.@10 kHz Offset
Phase Noise (1 GHz, Typ.) · Level Measurement Uncertainty < 0.7 dB (Typ.) · 1
Hz Minimum Resolution Bandwidth (RBW) · Preamplifier Standard · Tracking
Generator Standard · Up to 40 MHz Real Time Analysis Bandwidth · 100% POI 7.20
s, Dynamic Range 60 dB · Multi-view for Density, Spectrogram, PvT, and multi
trigger and FMT · Modulation Analysis up to 40 MHz BW (Opt.) · EMI Filter and
Quasi-Peak Detector Kit(Opt.) · 10.1 inch Multi-Touch Screen , Mouse and
Keyboard supported · Web Browser Remote Control on PC and Mobile Terminals and
File Operation
SHA850A Series
SHA852A (9 kHz~7.5 GHz) SHA851A (9 kHz~3.6 GHz)
Features and Benefits:
· Spectrum Analyzer Frequency Range from 9 kHz up to 7.5 GHz, -165 dBm/ Hz
Displayed Average Noise Level (Typ.), -104 dBc/Hz.@10 kHz Offset Phase Noise
(1 GHz, Typ.), 1 Hz up to 10 MHz Minimum Resolution Bandwidth (RBW),
Preamplifier and independent signal source up to 7.5 GHz, GPS positioning and
logging
· Cable and Antenna Test Frequency Range from 100 kHz up to 7.5 GHz, Distance
To Fault and Time Domain Analysis
· Vector Network Analyzer, Bias out up to 32VDC · Typical working time 4
hours, 3.2 kg net weight, 8.4 lnch Multi-Touch Screen ,
Mouse and Keyboard supported
www.siglent.com 15
Spectrum & Vector Network Analyzer
RF Signal Generator
SVA1000X Series
SVA1075X (9 kHz~7.5 GHz) SVA1032X (9 kHz~3.2 GHz) SVA1015X (9 kHz~1.5 GHz)
Features and Benefits:
· Vector Network Analyzer Frequency Range from 100 kHz up to 7.5 GHz · -165
dBm/Hz Displayed Average Noise Level (Typ.) · -98 dBc/Hz.@10 kHz Offset Phase
Noise (1 GHz, Typ.) · Level Measurement Uncertainty < 0.7 dB (Typ.) · 1 Hz
Minimum Resolution Bandwidth (RBW) · Preamplifier Standard · Tracking
Generator Standard · Distance To Fault (Opt.) · Analog and Digital Signal
Modulation Analysis Mode (Opt.) · EMI Filter and Quasi-Peak Detector Kit(Opt.)
· Advanced Measurement Kit (Opt.) · 10.1 lnch Multi-Touch Screen , Mouse and
Keyboard supported · Web Browser Remote Control on PC and Mobile Terminals and
File Operation
SSG6000A Series
SSG6087A (CW MODE 100 kHz ~ 40 GHz) SSG6085A (CW MODE 100 kHz ~ 20 GHz)
SSG6083A (CW MODE 100 kHz ~ 13.6 GHz)
Features and Benefits
· Frequency up to 13.6 GHz/ 20 GHz/ 40GHz · 0.01 Hz frequency setting
resolution · Level setting range: -130 dBm ~ 24 dBm · Phase Noise: -135 dBc /
Hz @ 1 GHz, 20 kHz offset (typ.) · Level error 0.7 dB (typ.) · Provides AM
analog modulation with internal, external or Int+Ext source · Single pulse,
double pulse and pulse train generator (option) · The power meter control kit
can easily use the power meter to measure
power, control power output and correct line loss 5 inch TFT capacitive touch
screen, mouse and keyboard supported · Web browser remote control on PC and
mobile terminals · Standard interface includes USB Host, USB Device (USB TMC),
LAN (VXI-11, Socket, Telnet). Optional interface: GPIB · Standard OCXO and
step attenuator (0 to 110 dB, 10 dB step)
www.siglent.com 16
SSG5000A Series
SSG5085A (CW MODE 9 kHz ~ 20 GHz) SSG5083A (CW MODE 9 kHz ~ 13.6 GHz)
Features and Benefits
· Frequency up to 13.6 GHz / 20 GHz · 0.001 Hz frequency setting resolution ·
Level setting range: -130 dBm ~ 25 dBm · Phase Noise: -120 dBc / Hz @ 1 GHz,
20 kHz offset (typ.) · Level error 0.7 dB (typ.) · Provides AM, FM, PM analog
modulation with internal, external or Int+Ext
source · Single pulse, double pulse and pulse train generator (option) · The
power meter control kit can easily use the power meter to measure
power, control power output and correct line loss · 5 inch TFT capacitive
touch screen, mouse and keyboard supported · Web browser remote control on PC
and mobile terminals · Standard interface includes USB Host, USB Device (USB
TMC), LAN (VXI-11,
Socket, Telnet). Optional interface: GPIB
RF Signal Generator
SSG5000X Series
SSG3000X Series
SSG5060X (CW MODE 9 kHz ~ 6 GHz) SSG5040X (CW MODE 9 kHz ~ 4 GHz) SSG5060X-V
(CW MODE 9 kHz ~ 6 GHz / IQ MODE 10 MHz ~ 6 GHz) SSG5040X-V (CW MODE 9 kHz ~ 4
GHz / IQ MODE 10 MHz ~ 4 GHz)
Features and Benefits
· Frequency up to 4 GHz/6 GHz · 0.001 Hz frequency setting resolution · High
output power up to +26 dBm (typ.) · Phase Noise: -120 dBc/ Hz @ 1 GHz, 20 kHz
offset (typ.) · User flatness correction with power sensor to correct the
cable loss · Provides AM, FM, PM analog modulation with internal, external or
Int+Ext
source · Single pulse, double pulse and Pulse train generator (option) ·
Internal IQ modulation with 150 MHz modulation bandwidth with perfect in-
factory calibration · Internal include some digital communication stand file
such as 5G-NR, LTE,
WCDMA, WLAN, and playback them · Internal Custom mode generate common IQ
signal such as QAM, FSK, ASK,
MSK · Analog differential I/Q outputs · External analog I/Q input · USB-power
meter measurement · 5inch TFT capacitive touch screen, mouse and keyboard
supported · Web browser remote control on PC and mobile terminals · Standard
interface included USB Host, USB Device (USB TMC), LAN (VXI-11,
Socket, Telnet). Optional interface: GPIB
SSG3032X (CW MODE 9 kHz~3.2 GHz) SSG3021X (CW MODE 9 kHz~2.1 GHz) SSG3032X-IQE
(IQ MODE 10 MHz~3.2 GHz) SSG3021X-IQE (IQ MODE 10 MHz~2.1 GHz)
Features and Benefits
· 0.01 Hz frequency setting resolution · Level output from -110 dBm to +13 dBm
· Maximum level up to +20 dBm (typ.) · Phase Noise: -110 dBc/ Hz @ 1 GHz , 20
kHz offset (typ.) · Level accuracy 0.7 dB (typ.) · Provides AM, FM, &PM analog
modulation with internal, external or Int+Ext
source · Pulse modulation, on/off ratio 70 dBc · Pulse train generator
(option) · External IQ modulation with SDG6000X as the baseband IQ signal ·
USB-power meter measurement · 5 inch TFT capacitive touch screen, mouse and
keyboard supported · Web browser remote control on PC and mobile terminals ·
Standard interface include USB Host, USB Device (USB TMC), LAN (VXI-11,
Socket, Telnet). Optional interface: GPIB
www.siglent.com 17
Probes and Accessories
Type
Model
Passive Probe
PB470 PP510 PP215
PB925
Picture
Specifications
PB470, 70 MHz bandwidth PP510, 100 MHz bandwidth PP215, 200 MHz bandwidth 1
X/10 X decay, 1 M/10 Mohm, 300 V/600 V
10X CAT II 1000 V, CAT III 600 V, 250 MHz-bandwidth, SHS1000 handheld
oscilloscope option
SAP1000
Active Probe, 1 GHz
SAP2500 Active Probe
SAP2500D
Active Probe, 2.5 GHz Differential Active Probe, 2.5 GHz
SAP5000D CPL5100 CP4020 Current Probe CP4050 CP4070 CP4070A www.siglent.com 18
Differential Active Probe, 5 GHz
Bandwidth: DC-600 kHz ; Current Range: L (50 mA~10 A Peak), H(1 A~100 A Peak);
Attenuation accuracy L (0.1 V/A), H (0.01 V/A); Typical DC precision: L (3%±50
mA), H(500 mA~40 A Peak : 4%±50 mA; 4 0A~100 A Peak : ±15% Maximum); Rise
Time: 583 ns; Operating voltage RMS: CATI 600 V CATII 600 V CATIII 300 V; 9 V
alkaline layer-built battery/ 15H
Bandwidth: 100 kHz; Maximum continuous current 20 Arms; Peak current 60 A;
Switching ratio: 50 m /A; 5 mV/A; DC measurement accuracy: 50 mV/A (0.4 A-10
ApK) ± 2%; 5 mV/A (1 A-60 ApK)±2%; 9 V battery-powered
Bandwidth: 1 MHz; Maximum continuous current 50 Arms; Peak current 140 A;
Switching ratio: 500 mV/A; 50 mV/A; DC measurement accuracy: 500 mV/A (20
mA-14 ApK) ±3%±20 mA; 50 mV/A (200 mA-100 ApK )±4%± 200 mA; 50 mV/A (100 A-140
ApK)±15% max; 9 V battery-powered
Bandwidth: 150 KHz; Maximum continuous current 70 Arms; Peak current 200 A;
Switching ratio: 50 mV/A; 5 mV/A; DC measurement accuracy: 50 mV/A(0.4A-
10ApK)±2%; 5 mV/A (1 A-200 ApK)±2%; 9 V battery-powered
Bandwidth: 300 kHz; Maximum continuous current 70 Arms; Peak current 200
A;Switching ratio100 mV/A;10 mV/A; DC measurement accuracy100 mV/A (50 mA-10
ApK) ±3%±50 mA; 10 mV/A (500 mA-40 ApK) ±4%±50 mA; 10 mV/A (40 A-200 ApK) ±15%
max; 9 V battery-powered
Type
USB AWG Module
Model
SAG1021I
BAG-H2
Carry Bag
BAG-S1
BAG-S2
SCP5030
SCP5030A
SCP5150
SCP5500 Current Probe
CP6030
CP6030A
CP6150
CP6500
Picture
Specifications
Frequency is determined by oscilloscope. Isolated USB function/arbitrary
waveform generator, 125 Msa/s, 16 kpts Arb Wave Length, Insulation Voltage,
±42 Vpk(Hardware)
Soft Carry Case for SHA850A
Soft Carry Case for SDS1000DL+/CML+, SDS1000X, SDS1000X-E, SDS2000X-E Series
Soft Carry Case for SDS2000X, SDS2000X Plus, SDS2000X HD, SDS5000X, SSA3000X,
SSA3000X Plus, SVA1000X, SSA3000X-R
Bandwidth: 50 MHz; Maximum continuous current 30 Arms; Peak current 50 A;
Switching ratio: 5 A/30 A; Accuracy: 5 A(±1%±1 mA); 30 A(±1%±10 mA); Powered
by oscilloscope via SAPBUS
Bandwidth: 100 MHz; Maximum continuous current 30 Arms; Peak current 50 A;
Switching ratio: 5 A/30 A; Accuracy: 5 A(±1%±1 mA); 30 A(±1%±10 mA); Powered
by oscilloscope via SAPBUS
Bandwidth: 12 MHz; Maximum continuous current 150 Arms; Peak current 300 A;
Switching ratio: 30 A/150 A; Accuracy: 30 A(±1%±10 mA); 150 A(±1%±100 mA);
Powered by oscilloscope via SAPBUS
Bandwidth: 2 MHz; Maximum continuous current 500 Arms; Peak current 750 A;
Switching ratio: 75 A/500 A; Accuracy: 75 A(±1%±10 mA); 500 A(±1%±100 mA);
Powered by oscilloscope via SAPBUS
Bandwidth: 50 MHz; Maximum continuous current 30 Arms; Peak current 50 A;
Switching ratio: 5 A/30 A; Accuracy: 5 A(±1%±1 mA); 30 A(±1%±10 mA); Standard
DC12 V/1 A power adapter
Bandwidth: 100 MHz; Maximum continuous current 30 Arms; Peak current 50 A;
Switching ratio: 5 A/30 A; Accuracy: 5 A(±1%±1 mA); 30 A(±1%±10 mA); Standard
DC12 V/1 A power adapter
Bandwidth: 12 MHz; Maximum continuous current 150 Arms; Peak current 300 A;
Switching ratio: 30 A/150 A; Accuracy: 30 A(±1%±10 mA); 150 A(±1%±100 mA);
Standard DC12 V/1 A power adapter
Bandwidth: 5 MHz; Maximum continuous current 500 Arms; Peak current 750 A;
Switching ratio: 75 A/500 A; Accuracy: 75 A(±1%±10 mA); 500 A(±1%±100 mA);
Standard DC12 V/1 A power adapter
www.siglent.com 19
Type
Model
CP6030
CP6030A Current Probe
CP6150
CP6500
DPB1300
DPB4080
High Voltage Differential Probe
DPB5150 DPB5150A
DPB5700
DPB5700A
High Voltage Probe
HPB4010
Logic Probe
SPL2016
www.siglent.com 20
Picture
Specifications
Bandwidth: 50 MHz; Maximum continuous current 30 Arms; Peak current 50 A;
Switching ratio: 5 A/30 A; Accuracy: 5 A(±1%±1 mA); 30 A(±1%±10 mA); Standard
DC12 V/1 A power adapter
Bandwidth: 100 MHz; Maximum continuous current 30 Arms; Peak current 50 A;
Switching ratio: 5 A/30 A; Accuracy: 5 A(±1%±1 mA); 30 A(±1%±10 mA); Standard
DC12 V/1 A power adapter
Bandwidth: 12 MHz; Maximum continuous current 150 Arms; Peak current 300 A;
Switching ratio: 30 A/150 A; Accuracy: 30 A(±1%±10 mA); 150 A(±1%±100 mA);
Standard DC12 V/1 A power adapter
Bandwidth: 5 MHz; Maximum continuous current 500 Arms; Peak current 750 A;
Switching ratio: 75 A/500 A; Accuracy: 75 A(±1%±10 mA); 500 A(±1%±100 mA);
Standard DC12 V/1 A power adapter
Bandwidth: 50 MHz; Rise Time 7 ns; DC Accuracy ±2%; Max Input: 600 V CATIII,
1000 V CATII; Max Differential Test Voltage (DC + Peak AC): 50 X: ±130 V, 500
X: ±1300 V. Input impedance/capacitance: 5 M/<4 pF(Singleended), 10 M/< 2
pF(Two inputs); DC 12 V/1.2 A Power
Bandwidth: 50 MHz; Maximum input differential voltage 800 V (DC + Peak AC);
Range selection (attenuation ratio):10 X/100 X; Accuracy: ±1%; Standard DC 9
V/1 A power adapter
Bandwidth: 70 MHz; Maximum input differential voltage 1500 V (DC + Peak AC);
Range selection (attenuation ratio): 50 X/500 X; Accuracy: ±2%; Standard 5 V/1
A USB power adapter
Bandwidth: 100 MHz; Maximum input differential voltage 1500 V (DC + Peak AC);
Range selection (attenuation ratio): 50 X/500 X; Accuracy: ±2%; Standard 5 V/1
A USB power adapter
Bandwidth: 70 MHz; Maximum input differential voltage 7000 V (DC + Peak AC);
Range selection (attenuation ratio): 100 X/1000 X; Accuracy: ±2%; Standard 5
V/1 A USB power adapter
Bandwidth: 100 MHz; Maximum input differential voltage 7000 V (DC + Peak
AC);Range selection (attenuation ratio): 100 X/1000 X; Accuracy: ±2%; Standard
5 V/1 A USB power adapter
Bandwidth: 40 MHz; Maximum input differential voltage DC: 10 kV; AC(rms): 7
kV(sine); AC(Vpp): 20 kV(Pulse); attenuation ratio1: 1000; Accuracy: 3%
Logic Probe, 16-channel, 500 MSa/s
Type
Model
Logic Analyzer SLA1016
Near-Field Probe
SRF5030T
Deskew Fixture DF2001A
Picture
N-BNC-2L
N-N-6L
N-SMA-6L
N-N-18L
N-SMA-18L
Cable
SMA-SMA-18L
SMA-SMA-26L
SMAF-SMA-26L
2.92F-2.92F-40A
V26-N35MN35F-25IN
V26-N35FA35F-25IN
Specifications
MSO function hardware for SDS2000X-E oscilloscope, 16-channel, 500 MSa/s, 14
Mpts Three magnetic field near-field probes and one electric field near field
probe; Frequency range: 30 MHz~3 GHz; resolution 25 mm; distinguished within
10 cm range of the magnetic field; for EMI radiation interference and the
intensity detector Deskew fixture for voltage and current probes
N-BNC cable, 2 GHz bandwidth
N-N cable, 6 GHz bandwidth
N-SMA cable, 6 GHz bandwidth
N(M)-N(M) cable, 18 GHz
N(M)-SMA(M) cable, 18 GHz
SMA(M)-SMA(M) cable, 18 GHz
SMA(M)-SMA(M) cable, 26 GHz
SMA(F)-SMA(M) cable, 26 GHz
2.92 mm Female – 2.92 mm Female adaptor, 40 GHz
NMD 3.5 mm male – NMD 3.5 mm female; 26.5 GHz; length 25”/635 mm
NMD 3.5 mm female – APC 3.5 mm female; 26.5 GHz; length 25”/635 mm
www.siglent.com 21
Type
GPIB
Model
USB-GPIB
Isolated Front End
ISFE
STB Test board STB-3
Picture
FX-USB2
Test fixture
FX-ETH
FX-AMETH
SDG-2-RMK
SDS1X-E-RMK
SDG-RMK Rack Mount
SSA-RMK
SSG-RMK
SDS2000 HD-RMK www.siglent.com 22
Specifications
USB-GPIB Adapter, USB Device expanded into GPIB interface
USB 5V power supply, plug and play, the maximum input voltage 600Vp-p,
floating test. Work with oscilloscopes
For experimental teaching and product demos
USB 2.0 test fixture
100Base-TX & 1000Base-T compliance test fixture
100Base-T1 & 1000Base-T1 compliance test fixture
Rackmount kit for two intruments ,SDG800, SDG1000X, SDG2000X, SDG5000,SDG6000X
series generators and SDM digital multimeters; Height 3U
Rackmount kit , compatible with the SDS800X HD, SDS1000X-E, SDS1000X-U,
SDS2000X-E model; Height 4U
Rackmount kit, compatible with SDG800, SDG1000X, SDG2000X, SDG5000, SDG6000X
series generators and SDM digital multimeters, SDL1000X load; Height 3U
Rackmount kit , compatible with the SSA3000X, SSA3000X Plus, SVA1000X,
SSA3000X-R model; Height 6U
Rack Mount kit; SSG3000X, SSG5000X, SSG5000A, SDG7000A; Height 3U
Rack Mount kit for SDS1000X HD, SDS2000X HD, SDS3000X HD; Height 6U(exactly
260 mm)
Type
Model
SPD3000-RMK
Picture
SPS5000X-RMK
SDS2000-RMK Rack Mount
SDS5000X-RMK
SDS6000-RMK
SSG6000A-RMK
F503ME
F503FE
F504MS
F504FS
F504TS
VNA Calibration Kit
F505TS F603ME
F603FE
F604MS
F604FS
F604TS
F604TY
Specifications
Rackmount kit , compatible with the SPD3000X/X-E/D/S/C models, Height 4U
SPS5000X EIA Standard rack, Height 3U
Rackmount kit is designed for use with only one instrument, is compatible with
the SDS2000,SDS2000X, SDS2000X Plus series Oscilloscope; Height 6U
Rack Mount kit for SDS5000X; Height 6U
Rack Mount kit for SDS6000A, SNA5000A, SSA5000A; Height 7U
Rack Mount kit; SSG6000A; Height 2U
Mechanical Calibration Kit: Open (M), Short (M), Match (M,50), Through (F-F),
4.5 GHz Mechanical Calibration Kit: OSLT, DC – 4.5 GHz, N-Female connector
Mechanical Calibration Kit: OSLT, DC – 9 GHz, N-Male connector Mechanical
Calibration Kit: OSLT, DC – 9 GHz, N-Female connector Mechanical Calibration
Kit: OSLT, DC – 9 GHz, N-Male and Female connector Mechanical Calibration Kit:
OSLT, DC – 18 GHz, N-Male and Female connector Mechanical Calibration Kit:
OSLT, DC – 4.5 GHz, 3.5 mm SMA-Male connector Mechanical Calibration Kit: Open
(M), Short (M), Match (M,50), Through (F-F), 4.5 GHz, SMA-type Mechanical
Calibration Kit: OSLT, DC – 9 GHz, 3.5 mm SMA-Male connector Mechanical
Calibration Kit: OSLT, DC – 9 GHz, 3.5 mm SMA-Female connector Mechanical
Calibration Kit: OSLT, DC – 9 GHz, 3.5 mm-Male and Female connector Mechanical
Calibration Kit: OSLT, DC – 27 GHz, 3.5 mm-Male and Female connector
www.siglent.com 23
Type
Model
Y504MS
VNA Calibration Kit
Y504FS
Amplifier
SPA1010
Synchronous Module
SYN64
ANT-GPS1
ANT-DA1
Antenna
ANT-DA11
ANT-DA12
ANT-DA13
RF Test board SNA-TB01 www.siglent.com 24
Picture
Specifications
Integrated Mechanical Calibration Kit: OSLT, DC – 9 GHz, N-Male
Integrated Mechanical Calibration Kit: OSLT, DC – 9 GHz, N-Female
Increase the voltage and current output capabilities to generators like the
SIGLENT SDG family. Typical Input Impedance: 15 k Input: +/- 6.5 V Vpp (Gain:
X1) +/- 1.3 V (Gain: X10) Gain: Switched 10 V/1 V and 10 V/10 V Output
Voltage: 25.4 Vpp Output Current: 1.12 A Slew Rate: 90 V/s Overshoot: 4%
Compatible with all SIGLENT SDG series generators
64 synchronous module
GPS antenna, SMA(M), 100 cm
Directional Antenna Suit, N type, ANT-DA11 antenna (10 MHz~200 MHz), ANT-DA12
antenna (200 MHz~500 MHz), ANT-DA13 antenna (500 MHz~8 GHz), Amplifier handle
12dB@1GHz(typ.)
Contains amplifier handle and 10 MHz ~ 200 MHz antenna. Antenna gain 10 dB
(typical value); SWR <1:1.9 (typical value); 50 /N type, female; polarization
direction horizontal and vertical
Contains amplifier handle and 200 MHz ~ 500 MHz antenna. Antenna gain 10 dB
(typical value); SWR <1:1.9 (typical value); 50 /N type, female; polarization
direction horizontal and vertical
Contains amplifier handle and 500 MHz ~ 8 GHz antenna. Antenna gain 10 dB
(typical value); SWR <1:1.9 (typical value); 50 /N type, female; polarization
direction horizontal and vertical
Board integrated with RF components like amplier, mixer, filter for vector
network analyzer demonstration
Type
Model
ADP-18
TDR Probe
ADP-26 ASP-18
ASP-26
SSM5122A
SSM5124A
Switch Matrix
SSM5142A SSM5144A
SSM5321A
SSM5342A
SSA3000X Utility Kit
UKitSSA3X
Rechargeable lithium battery
10V8_BAT
AC-DC adapter 12V_AP_4A
Reflection Bridge
RB3X25
PC Software
SigIQPro
Noise Source Driver
NSD28
Picture
Specifications
Adjustable differential TDR probe DC~18 GHz Adjustable differential TDR probe
DC~26.5 GHz Adjustable single-end TDR probe DC~18 GHz Adjustable single-end
TDR probe DC~26.5 GHz 2 input ports, 12 output ports, 3.5 mm female, 9 kHz~9
GHz 2 input ports, 24 output ports, 3.5 mm female, 9 kHz~9 GHz 4 input ports,
12 output ports, 3.5 mm female, 9 kHz~9 GHz 4 input ports, 24 output ports,
3.5 mm female, 9 kHz~9 GHz 2 input ports, 6 output ports, 3.5 mm female, 100
kHz~26.5 GHz 4 input ports, 12 output ports, 3.5 mm female, 100 kHz~26.5 GHz
Utility Kit for SSA3000X Series: N (M) -SMA (M) cable, N (M) -N (M) cable, N
(M) -BNC (F) adaptor (2 pcs), N (M) -SMA (F) adaptor (2 pcs), 10 dB
attenuator;
10.8V, 74 Wh
12V, 4A
RB (1 MHz~2.5 GHz), N (M) -N (M) adaptor (2 pcs), for SSA3000X, SSA3000X Plus
series
A comprehensive PC-based software for general and standards-based signals
creation, supporting Bluetooth, IoT, Custom OFDM, etc.
Noise source driver, connect spectrum analyzer to noise source www.siglent.com
25
Type
Model
SEM5002A
SEM5012A
SEM5022A
VNA Calibration Kit
SEM5032A SEM5004A
SEM5014A
SEM5024A
SEM5034A
SSU5181A
SSU5182A
SSU5183A
SSU5184A
SSU5261A
SSU5262A
Mechanical Switch
SSU5263A SSU5264A
SSU5265A
SSU5266A
SSU5501A
SSU5502A
SSU5503A
SSU5504A www.siglent.com 26
Picture
Specifications
2 ports, 9 kHz~4.5 GHz, SMA female 2 ports, 9 kHz~9 GHz, SMA female 2 ports,
100 kHz~13.5 GHz, 3.5 mm female 2 ports, 100 kHz~26.5 GHz, 3.5 mm female 4
ports, 9 kHz~4.5 GHz, SMA female 4 ports, 9 kHz~9 GHz, SMA female 4 ports, 100
kHz~13.5 GHz, 3.5 mm female 4 ports, 100 kHz~26.5 GHz, 3.5 mm female DC~18
GHz, including one SPDT mechanical switch, SMA female DC~18 GHz, including two
SPDT mechanical switchs, SMA female DC~18 GHz, including three SPDT mechanical
switchs, SMA female DC~18 GHz, including four SPDT mechanical switchs, SMA
female DC~26.5 GHz, including one SPDT mechanical switch, SMA female DC~26.5
GHz, including two SPDT mechanical switchs, SMA female DC~26.5 GHz, including
three SPDT mechanical switchs, SMA female DC~26.5 GHz, including four SPDT
mechanical switchs, SMA female DC~26.5 GHz, including one SP6T mechanical
switch, SMA female DC~26.5 GHz, including two SP6T mechanical switchs, SMA
female DC~50 GHz, including one SPDT mechanical switch, 2.4 mm female DC~50
GHz, including two SPDT mechanical switchs, 2.4 mm female DC~50 GHz, including
three SPDT mechanical switchs, 2.4 mm female DC~50 GHz, including four SPDT
mechanical switchs, 2.4 mm female
About SIGLENT
SIGLENT is an international high-tech company, concentrating on R&D, sales,
production and services of electronic test & measurement instruments.
SIGLENT first began developing digital oscilloscopes independently in 2002.
After more than a decade of continuous development, SIGLENT has extended its
product line to include digital oscilloscopes, isolated handheld
oscilloscopes, function/arbitrary waveform generators, RF/MW signal
generators, spectrum analyzers, vector network analyzers, digital multimeters,
DC power supplies, electronic loads and other general purpose test
instrumentation. Since its first oscilloscope was launched in 2005, SIGLENT
has become the fastest growing manufacturer of digital oscilloscopes. We
firmly believe that today SIGLENT is the best value in electronic test &
measurement.
Headquarters: SIGLENT Technologies Co., Ltd Add: Bldg No.4 & No.5, Antongda
Industrial Zone, 3rd Liuxian Road, Bao’an District, Shenzhen, 518101, China
Tel: + 86 755 3688 7876 Fax: + 86 755 3359 1582 Email: [email protected]
Website: int.siglent.com
USA: SIGLENT Technologies America, Inc 6557 Cochran Rd Solon, Ohio 44139 Tel:
440-398-5800 Toll Free:
877-515-5551 Fax:
440-399-1211 Email: [email protected]
Website: www.siglentna.com
Europe: SIGLENT Technologies Germany GmbH Add: Staetzlinger Str. 70 86165
Augsburg, Germany Tel: +49(0)-821-666 0 111 0 Fax: +49(0)-821-666 0 111 22
Email: [email protected] Website: www.siglenteu.com
Follow us on Facebook: SiglentTech
modification date2024-03