Shenzhen Xinshuoya Electronics ES-868 Bone Conduction Headphone User Guide

June 6, 2024
Shenzhen Xinshuoya Electronics

Shenzhen Xinshuoya Electronics ES-868 Bone Conduction Headphone

Product Keys

  1. Function key for
  2. LED
  3.  Magnetic charging port
  4.  Volume up
  5.  Volume down
  6.  Microphone

Multi-Function Button

FUndlon Operation Prompt
Poweron Keep pressing(!)keyfor2s ‘Power on’
Poweroff Keep pressing(!)keyfor3s ‘Power off”
Pairing Keep pressing(!)keyfor 5s ‘Pairing”

Multi-Point Connection

| 1.Keep pressing(!)keyforSs 2.Connect device A

3Jurn off Bluetooth of device A

4.Keep pressing(!) key for Ss 5.Connect device B 6.Activate Bluetooth

of device A

| Speech
Play I Pause| Press(!)oncewhen

music playing

| N/A
Reject call| Press(!)for ls when

incoming call

| N/A
Accept call| Press(!) once when

incoming call

| N/A
End call| Press(!)once duringa call| N/A
Voice assistant

Accept incoming call

| Press(!)thrice in

standby mode

| Beep
and end current one| Press(!) for 2s| Tone
Bluetooth / Memory playback switch| Press(!)twice in standby mode| voice

+/- Volume Key

Functlon Operation Prompt
Prev Tap- key forls in music play N/A
Next Tao+ kevfor ls in music olav N/A
Volume up Tap+ once in musk play N/A
Volume down Tap- once in music play N/A
Reset Enter pairing mode, tap+ and – simultaneously for 3s Tone

Specifications

Product tvoe Bone Conduction Headphone
Model no# HRBC01
Bluetooth version Bluetooth” VS.2
Material SIlica !!!!I+ntanium allov+PC
Bluetooth protocols A2DP,AVRCP,HSP,HDP
Effective range More than 10 meters without obstruction
Freauencv resoonse 20Hz-20kHz
Audio Code AAC,SBC
Memory capacity 8GB
Supports audio formats MP3/WAV/R..AC
Battervcapacitv 180mA/ 3.7V li-001vmer
Standby duration 6hrs C70%Volume)
Chargetime 2 hrs
lnoutvoltage Sv
Speaker type Bone Conduction speaker
Speaker sensitivity 87dB±3dB
Microphone sensitivity -38dB±ldB
Waterproof rating IPXB
Weight 32g[l.12oz)

LED Indicator

Color StatU$
Red blinks once everv 3s Battervlow
Constant red charging
Constant blue Charging complete
Blue blinks Incoming call

Rea and blue blink

alternately

| Pairing mode/

Multi-point connection

Blue blinks once every Ss| Connection successful

To charge the headphone
Connect the original charging cable to the magnetic suction port of the headset and the charging head respectively, and the headphone will be fully charged within 2 hours. In order to better ensure the charging life, please use the SV-IA charging head.

Note:
There are positive and negative poles corresponding to the magnetic suction charging. Muwal adsorption can charge normally; MuWal exclusion can not charge, which may cause short circuit of the main board circuit. Please do not force the magnetic suction to fit and contact.

Warning:
The life of the rechargeable battery of this product is not shorter than the service life of the product. The battery must betaken out by professional recycling equipment Any attempt to take out or replace the battery may damage the headphone and affect your warranty rights. Please do not put the battery into the fire to avoid an explosion

To download songs:
Turn off the headset, connect the PC and ES-868 Plus headphone with the magnetic suction cable provided, and the PC will prompt the removable disk selection window. Select the corresponding folder and copy files to each other. Switch the headphone to the local playback mode to play music in the U flash disk.

Warning:
During uploading or downloading data files, do not unplug the USB cable to avoid damage to the headset.

Warm tips:
When swimming. please switch the headset to MP3 mode; Otherwise, headset connection signal in Bluetoath mode will be lost in the water.

Tips and Maintenance

  1.  The earphone should be stored in a coal and dry place, and the working temperature should be 0-45 ‘C (32 -113 Fl: Worl<ing in an environment that is too cold, too hot or too humid may shorten the lifl! of the head phone.
  2. Listening to music at too high a volume may damage your hearing and the sound may be distorted. For traffic safety,  Please do not use the headphone while driving or riding.
  3.  After exercise, please wipe the water on the surface of the to prevent sweat and salt from eroding the charging port and affecting the service life of the product.
  4.  Clean the headphones with a soft, dry cloth.
  5.  Please keep away from sharp and hard objects, which may damage the headphone.
  6. .Do not use the headphone in direct sunlight for a long time.
  7. Do not use the headphone in extreme light, temperature or vibration. Please do not use headphones in high-temperature environment. For example, use a hair dryer and enter the sauna room at the same time or near the stove.
  8. Do not place the headphone on an unstable or indined surface.
  9.  Children should use this device under the supervision of adults. This product is not a toy.

Reminder
 Improper use of the headphone may cause injury to itself or may endanger personal and property safety.  In case of personal and property damage caused by improper use or warning by consumers in violation of product instructions. the company will not bear all consequences and the company will not bear any legal liability.

Safety

FCC Disclaimer

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, ii not installed and used in accordance with the instructions may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user
is encouraged to try to correct the interference by one or more of the following measures: Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/tv technician for help.

FCC Caution:
To assure continued compliance, any changes or modifications to this device not expressly approved by manufacturer could void your authority to operate this equipment This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

  1.  This device may not cause harmful interference, and
  2.  this device must accept any interference received, including interference that may cause undesired operation. The device has been evaluated to meet general RF exposure requirements The device can be used in portable exposure conditions without restriction. Declaration of Conformity for EU Countries EMC Directive2014/30/EU (including amendments) Low Voltage Directive 2014/35/EU RED Directive 2014/53/EU (if the product has a function)Disposal instructions Do not throw this electronic device into the trash when discarding. To minimize pollution and ensure the utmost protection of the global environment, please recycle it.

Read User Manual Online (PDF format)

Loading......

Download This Manual (PDF format)

Download this manual  >>

Shenzhen Xinshuoya Electronics User Manuals

Related Manuals