EAGON DIARY Disco Lights LED Party Light Rechargeable User Manual
- June 14, 2024
- EAGON DIARY
Table of Contents
EAGON DIARY Disco Lights LED Party Light Rechargeable
Product Description
Light Source: 650nm red beam light & 532nm green beam light; RGB 3 in 1
LED light
Working Mode: auto / sound activated I flash / static color
Voltage: AC 100 – 240V, 50~60Hz
Mounting Type: Bracket allows for multiple rigging or floor standing
applications.
Power Adaptor: DC5V, 1 A-2A
Cooling System: built-in fan
Timer: 4 options ( 1 /3/6/8 hours
Remote Control Instruction
Note: the remote control requires two CR2025 batteries to work, which are included in the package.
| BUTTON | FUNCTION |
|---|---|
| Power on/ off | |
| Turn on the flash mode | |
| The pattern effects stay static | |
| Choose AUTO 1 mode. The LED lights stay blue and the beam lights changes |
automatically
| Choose AUTO 2 mode. The beam light stay green and the LED lights changes
between red and blue
| Choose AUTO 3 mode. The beam light stay red and the LED lights changes
between red, blue and green
| Choose SOUND 1 mode. The lights are working under the sensitive sound-
activated mode and flash with the music
| Choose SOUND 2 mode. The motor works with faster speed, lighting effects
will change by the music
| Choose SOUND 3 mode. The motor works with slower speed, lighting effects
will change by the music
| Only turn on the beam lights. The pattern effects will changes
automatically, press the motor stop button can make the patterns to static
mode
| Only turn on the red beam light. The pattern effects will changes
automatically, press the motor stop button can make the patterns to static
mode
| Only turn on the green beam light. The pattern effects will changes
automatically, press the motor stop button can make the patterns to static
mode
| The LED lights changes automatically
| Turn on the static red LED light only
| Turn on the static green LED light only
| Turn on the static blue LED light only
| Turn on the static red and blue LED light only
| Turn on the static red and green LED light only
| Turn on the static green and blue LED light only
| Turn on the static RGB LED lights
| Setup the timer for 1 hour
| Setup the timer for 3 hours
| Setup the timer for 6 hours
| Setup the timer for 8 hours
Troubleshooting
There is no light output, or the lights does not work.
- Check the connection of power and main fuse.
- To ensure the voltage matches the need of 5V USB Power.
The light doesn’t respond to sound.
- Check the light’s internal microphone by tapping the microphone.
- Please confirm if you turned on the sound activated mode.
The remote doesn’t work.
- Since it adopts infrared controlled system, please aim the remote though the front of the light.
- Please confirm if batteries in the remote run out.
Important Safeguards
- Be sure that the local power outlet match that of the required volt-age for your unit.
- Do not attempt to operate this unit if the power cord has been frayed or broken.
- Do not remove the cover under any conditions. There are no user serviceable parts inside.
- Never plug this unit in to a dimmer pack.
- The appliance should be situated away from heat sources, such as radiators, heat registers, stoves, or other appliances (including amplifiers) that produce heat.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>