Soundcore AK-A3371211 Infini 2.1 Channel Sound Bar User Manual
- June 5, 2024
- Soundcore
Table of Contents
Soundcore AK-A3371211 Infini 2.1 Channel Sound Bar
What’s Included
- Soundcore Infini 2
- AC Power Cable
- Remote Control
- Batteries × 2
- HDMI 2.0 Cable
- AUX Cable
- Screws × 2, Anchors × 2
- User Manual
- Safety Card
- Brand Card
At a Glance
FRONT PANEL
- Indicator Light
- Remote Sensor
TOP PANEL
- Standby Button
- Source Button
- Bluetooth Button
- Volume Down Button
- Volume Up Button
REAR PANEL
- Wall Mount Screw Holes
- AC IN Socket
- HDMI Port (ARC IN)
- USB Port
- Optical Port
- AUX Port (LINE IN)
Placement
Placing on a TV stand
Mounting on a Wall
- Drill two holes (about 6mm in diameter) on the wall. Insert the two anchors into the drilled holes, then insert the two screws into the holes and tighten.
- Take care to leave 4mm between the screw heads and wall.
- Hang your Soundcore Infini 2 on the wall.
Connecting
There are 3 ways to connect your Soundcore Infini 2 to a TV or other devices.
Option 1: Connect to TV via Bluetooth
- Press and hold the Bluetooth button for 2 seconds to enter Bluetooth pairing mode.
- Turn on the Bluetooth of your TV, and select “Soundcore Infini 2” on the Bluetooth list to connect.
Option 2: Connect to TV via HDMI Cable or Optical Cable(Not Included
)
TIP: The optical port cannot be used when a TV is connected to the soundbar via HDMI port.
Option 3
- Connect to Other Devices via AUX Cable or USB Port
Using Your Soundcore Infini 2
- The soundbar will automatically switch to standby mode when no audio input is received for 20 minutes.
- The soundbar will wake up from standby mode when any button is pressed or source input is received.
LED Light Guide
Remote Control
- Insert the batteries into the remote control. Point the remote control at the remote sensor on the front panel.
- The remote control works within a distance of about 26 ft / 8 m from the sensor and within an angle of about 30 degrees from the left and right sides.
Reset
- If the soundbar isn’t working correctly, press and hold the Source Input Button and Volume Up Button on the soundbar simultaneously for more than 8 seconds to reset it.
Firmware Update
- To get the best features and support, update your soundbar with the latest firmware via the USB port.
- https://support.soundcore.com/s/
Specifications
Specifications are subject to change without notice.
Customer Service
18-month limited warranty
Our warranty is additional to the legal rights consumers have buying this product.
- service@soundcore.com
- support.mea@soundcore.com (For Middle East and Africa Only)
- support@anker.com
- +1 (800) 988 7973 (US) Mon-Fri 6:15AM – 5:00PM (PT)
- +44 (0) 1604 936200 (UK) Mon-Fri 6:00-17:00 Sat-Sun 6:00-14:00
- +49 (0) 69 9579 7960 (DE) Mon-Fri 6:00 – 11:00 Uhr
For FAQs and more information, please visit: soundcore.com/support
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>