dvras TB-505B Series Juicer Blender Instruction Manual
- June 1, 2024
- dvras
Table of Contents
Instruction manual
Blender
Model: TB-505B
Please carefully read the instructions before using!
SAFETY PRECAUTIONS
-
Read all instructions carefully before you use the appliance.
-
Always disconnect the appliance from the supply if it is left unattended and before assembling, disassembling or cleaning.
-
This appliance shall not be used by children. Keep the appliance and its cord out of reach of children.
-
Appliances can be used by persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved.
-
Children shall not play with the appliance.
-
If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or similarly qualified persons in order to avoid a hazard.
-
Care shall be taken when handling the sharp cutting blades, emptying the bowl and during cleaning.
-
Switch off the appliance and disconnect from supply before changing accessories or approaching parts that move in use.
-
This appliance is intended to be used in household and similar applications such as:
o staff kitchen areas in shops, offices and other working environments;
o by clients in hotels, motels and other residential type environments;
o bed and breakfast type environments. -
Ensure fingers are kept well away from the blades when in use.
-
Do not blend hot ingredients.
-
Always operate on a flat surface.
-
Ensure the control dial is in the off ‘0’ position before plugging into the power outlet.
-
Do not operate for more than 2 minutes at a time.
-
Read carefully and save all the instructions provided with an appliance.
-
Always turn the power off at the power outlet before you insert or remove a plug. Remove by grasping the plug, do not pull on the cord.
-
Do not use your appliance with an extension cord unless this cord has been checked and tested by a qualified technician or service person.
-
Always use your appliance from a power outlet of the voltage (A.C. only) marked on the appliance.
-
Do not use an appliance for any purpose other than its intended use.
-
Do not place an appliance on or near a hot gas flame, electric element or on a heated oven. Do not place on top of any other appliance.
-
Do not let the power cord of an appliance hang over the edge of a table or bench top or touch any hot surface.
-
Do not operate any electrical appliance with a damaged cord or after the appliance has been dropped or damaged in any manner.
-
Do not immerse the appliance in water or any other liquid unless recommended.
-
Never touch the blades while the machine is plugged in.
-
Take special care when emptying and cleaning the blender jug, as the blades are extremely sharp.
-
Regarding the instructions for cleaning surfaces in contact with food, thanks to refer to the section “Care and Cleaning”.
IDENTIFICATION OF PARTS
- Housing upper cover
- Front cover
- Knob decorative ring
- Control knob
- Base
- Plastic feet
- Housing
- Plug & power cord
- Measuring cup
- Jug lid
- Blender jug(Max 1500ML)
- Blender jug base
USING YOUR BLENDER
-
Mount the Measuring cup (9) onto the Jug lid (10) and turn it tight. Secure the Lid onto the Blender jug and press down (Fig 1).
-
Place the Blender jug on the Main body and rotate it clockwise (Fig 2). See also chapter ‘Safety locking system’.
-
Remove the Lid or the Measuring cup from the Blender jug and place ingredients into the jug.
-
Place the Lid with the Measuring cup back onto the Blender jug and rotate the blender clockwise to lock. See also chapter ‘Safety locking system’. Do not exceed the maximum indicated level-1.5litres.
-
Using the Selector control knob, select the desired blending speed 1-2 or Pulse.
-
The Pulse function remains on as long as the Knob is turned to the “Pulse” position all the time for greater control when blending,
-
e.g. when chopping nuts or chocolates, or crushing ice.
-
Setting1-2 will provide continuous blending until the Control knob is turned to the ‘0’ position.
-
You can add further ingredients while blending. For this, remove the Measuring cup from the pouring hole.
-
After you have completed blending, turn the Control knob to the ‘0’ position.
-
Unplug the appliance, remove the Blender jug from the main body by turning it anticlockwise until the Handle of the Jug is aligned with the “unlock” mark on the Base (Fig 3), and then remove the Lid and pour the food out.
Safety Locking System
With safety in mind, this Blender was designed with a safety locking system.
Unless the Blending jug are positioned correctly and locked in place, the
Blender will not operate.
For correctly assembling the Blender, operate as follows:
- Place the Main body on the table, with the front facing toward you.
- Place the blending jug onto the main body with the handle to the right, turn the blending jug to the right until you hear a slight click. The lock mark on the motor base and blending jug should now be aligned with each other. If this is the case, the blending jug is locked correctly. Now the Blender is ready for use.
HANDY BLENDING HINTS
- A brief whirl in the blender will rescue a lumpy gravy, or an egg-based sauce that has separated.
- Food items for blending should be cut into cubes (approx. 2-3 cm), this will assist in achieving an even result.
- Never fill the Blender jug above the maximum level indicated.
- When pureeing fruit or vegetable, cooked or raw, cut into small pieces to facilitate blending.
- When blending a variety of ingredients together, blend the liquids first, then add other ingredients.
- Always ensure stones are removed from fruit and bones from meat as these can harm the blades.
- Do not process hot liquids in your blender. Allows it to cool before processing.
Always ventilate the Blender jug when pureeing warm ingredients. This is achieved by lifting the ingredient cup out of the lid, after starting the blender.
CARE AND CLEANING
Unplug the appliance and detach all the accessories before cleaning.
Half fill the Blender jug with warm and a small amount of detergent.
Use the ‘Pulse’ function and hold for 1-2 seconds and release.
Repeat 3-4 times.
Then remove the jug or cup and rinse them under running water.
For thorough cleaning, wash the Blender lid, Measuring cup and Blender jug in
warm soapy water. These parts can also be cleaned in the dishwasher.
The Blade base can be cleaned in running water in the direction of the blades
upwards. Do not flush the bottom of the Blade base. See also chapter ‘Removing
/Fitting the Blade base’.
Caution: Take care when cleaning the blades as they are extremely sharp.
To clean the motor base
Use a damp, soft sponge with detergent and wipe over the motor base.
Note: Never immerse the motor base in water.
REMOVING/FITTING THE BLADE BASE
For correctly removing / fitting the Blade base, operate as follows:
Blade base of Blender jug – turn the Blender jug up-side down, rotate the
Blade base in the direction of the opening arrows by holding the ribs on the
Blade base, and then take the Blade base away and detach the Seal ring. Clean
all the parts under the running water and dry them. Fitting is the reverse of
removal; do not forget to reattach the Seal ring levelly and turn the Blade
base in place.
Caution: Take care when removing and fitting the blades as they are extremely sharp.
STORAGE
- Clean the device as described then let it dry thoroughly.
- We recommend storing the device in its original packaging!
- Store the appliance in a well-ventilated, dry place out of the reach of children.
TECHNICAL SPECIFICATIONS
Rated voltage: 220-240V
Rated frequency: 50/60Hz
Rated power consumption: 500W
Protection class (against electric shock): CLASS II.
WASTE MANAGEMENT
Correct Disposal of this product
**** This marking indicates that this product should not be disposed with other household wastes throughout the EU. To prevent possible harm to the environment or human health from uncontrolled waste disposal, recycle it responsibly to promote the sustainable reuse of material resources. To return your used device, please use the return and collection systems or contact the retailer where the product was purchased. They can take this product for environmental safe recycling.
CE SYMBOL
**** The mark is intended to indicate that the product complies with the
relevant European Union standards and can be freely marketed in the European
Union.
www.dyras.hu
Copyright © 2023 The dyras wwe.factory LLC U.S.A.
No parts of the content (including logos, design, photos, text, colour scheem
arrangements, etc.) may be reproduced, reused or redistributed for any purpose
whatsoever, or distributed to a thirdparty for such purposes, without the
written permission of The dyras
wwe.factory LLC.
®= registered trademark of Dyras Europe Kft.