WALKER B23 Tractor Coastline Mowers User Manual
- June 13, 2024
- WALKER
Table of Contents
Illustrated
Parts Manual
B23
ITEM NO.| PART NO.| DESCRIPTION| LOCATION| NO.
REQ’D SD
---|---|---|---|---
Walker Product and Operation Decals
1| 8600-48| RH Fender| Chassis, RH Side Near Seat| 1
2| 5800| Decal, Round (4″)| Rear Body (one on each side)| 2
| 5800-9| Decal, Round (4-3/4″)| Utility Bed (one on each side)| 2
3| 8600-65| LH Fender| Chassis, LH Side Near Seat| 1
4| 9804-1| Axle Lockout| Chassis| 2
5| 8821-31| Decal, B23| Chassis, Front| 1
6| 5856-1| Made In USA| Chassis, Front| 1
Danger Decals Warning Decals Caution Decals
7| 4107-13| Decal, Belt Routing| Front Body, Underside| 1
8| 8600-2| Decal, Rotating Components| Air Cleaner Mount| 1
9| 8600-12| Danger, Engine Exhaust| Rear Body, Underside or Utility Bed,
Underside| 1
10| 8600-5| Caution, Engine Exhaust| Rear Body or Utility Bed| 1
Maintenance Decals
11| 5855| Important, Engine Cooling| Body Support| 1
12| 6895-103| Kohler 300 Hour Oil| Body Support, LH Side| 1
13| 6875| PTO Alignment Arrow| Universal Joint Tube Assembly| 1
14| 8600-54| Decal, Ignition Switch| Front Body| 1
NOTE: All parts requiring decals are shipped with decals applied.
TRACTOR DECALS
BODY/CHASSIS ASSEMBLY
| ITEM NO. | PART NO. | DESCRIPTION | NO. REQ’D |
|---|
Seat Assembly
1| 6104-31| Comfort Seat| 1
2| 7440-5| Shock Mount (1-1/4 x 3/4)| 4
Body Assembly
3| 4100-9| Front Body| 1
4| 4100-7| Spacer (1/4 x 3/8 x 3/4)| 2
5| 5146| 10mm Ball Stud| 2
6| 4145-2| Gas Spring Assembly| 1
| | (Includes Item # 5)|
7| 5180| Edge Molding / Lever Opening| 2
8| 4504-2| Hinge (17″)| 1
9| 5989-18| Dome Plug (11/16)| 1
Body Latch Assembly
10| 7222| Extension Spring (1/4 x 3)| 1
11| 7383-12| Body Latch Hook, RH| 1
12| 7383-9| Body Latch Trigger| 1
13| 7383-13| Body Latch Hook, LH| 1
14| 5854| Plastic Tip| 1
Chassis Assembly
15| 5845| Rubber Bumper (1.50 x 1.25)| 2
16| 4910-7| Battery Mount| 1
17| 4301-13| Debris Shield| 1
| | (Includes Items # F004 & F029)|
18| 4215-10| Shock Mount / Body Lift Arm| 1
19| 4305-1| Chassis Frame| 1
20| 2046| Gas Tank Mount| 1
Spread Tail Wheel Assembly
21| 4401-4| Washer (1-3/4 x 3/8 x 1/4 Thk)| 1
22| 4301-2| Fiberglide Thrust Washer| 2
23| 4301-3| Fiberglide Bearing| 2
24| 4301-12| Tail Wheel Pivot| 1
| | (Includes Items # 23, 25 & 26)| 2
25| 5830| Grease Fitting| 1
26| 5830-4| Grease Fitting (90 Deg.)| 2
27| 8769-8| Dust Cap, Deck Caster| 4
28| 8769-6| Bearing Cone (1″ ID)| 4
29| 8769-5| Bearing Cup (2 x 1-5/8)| 2
30| 8769-7| Seal| 2
31| 8765-14| Caster Wheel Fork| 4
32| 8769-13| Bearing Cup (7/16 ID)| 4
33| 5037-1| Bearing, Tail Wheel| 2
34| 5038-3| Axle Spacer Tube (4.995) (.4375 ID)| 2
35| 8768-10| Caster Wheel, Pneumatic
(11 x 4-5 PR, BB)
(Includes Items # 32-34 & F634)
Tire, Pneumatic (11 x 4-5 6-Ply)| *
REAR BODY ASSEMBLY
ITEM NO.| PART NO.| DESCRIPTION| NO.
REQ’D
---|---|---|---
Utility Bed Option
1| 8650-13| Bed Liner (19-1/4 x 22)| 1
2| 4650-2| Utility Bed (Includes Items # 1 & 3)| 1
3| M112| Edge Molding (17-5/8″)| 1
Rear Body Assembly
4| 4105-7| Rear Body| 1
5| 5145-4| Gas Spring Assembly| 1
6| 4013-6| Muffler Guard| 1
7| 5146| 10mm Ball Stud| 2
8| 4013-9| Body Pivot Plate| 2
9| 4013-7| Muffler Guard, LH| 1
10| 4013-8| Muffler Guard, RH| 1
11| 7844| Rubber Bumper (1.25 x .250)| 2
12| 4104-12| Body Support| 1
13| 4104-11| Rear Body Support| 1
14| 4104-14| Rear Body Cross Brace| 1
15| 4104-13| Body Support Brace| 1
Fasteners
16| F004| 1/4-20 Keps Nut| 10
17| F009| 5/16-18 Whiz Locknut| 11
18| F029| 1/4-20 x 1/2 Hex Bolt| 10
19| F034| 5/16-18 x 3/4 Hex Bolt| 7
20| F093| 5/16-18 x 1 Hex Bolt| 2
21| F226| 5/16-18 x 7/8 Hex Bolt| 2
22| F504| 1/4-20 Whiz Locknut| 2
23| F551| 5/16-18 Flange Top Lock Nut| 4
24| F582| Washer 5/16 x 7/8 x .125| 3
25| F643| 1/4-20 x 3/4 Carriage Bolt Flat Head| 2
26| F645| 5/16-18 x 1-1/8 Hex Bolt| 2
REAR BODY ASSEMBLY
MAIN COMPONENT POWER TRANSMISSION
| ITEM NO. | PART NO. | DESCRIPTION | NO. REQ’D |
|---|
PTO Drive Assembly
1| 4230-3| PTO Drive Belt| 1
2| 5247-2| V-Groove Idler (4″)| 2
3| 6325-2| Spacer Bushing (5/16)| 1
4| 7201-3| Fiberglide Bearing| 2
5| 7201-7| Inner Race (2-5/8)| 1
6| 4325-16| Idler Mount, RH| 1
7| 4325-17| Idler Pivot| 1
8| 5146| 10mm Ball Stud| 2
9| 2215-6| Pressure Dampener| 1
10| 4410-18| Dampener Mount| 1
11| 4325-15| Idler Mount, LH| 1
12| 4411-6| Drive Shaft Collar| 1
13| 5830-3| Grease Fitting (45 Deg.)| 1
14| 4411-7| Drive Shaft| 1
15| 4410-17| Clutch Stop| 1
16| 4410-15| Clutch| 1
17| 4410-9| Washer 1 x 1-5/8 x 1/4| 1
18| 5830| Grease Fitting| 1
19| 7275-16| Universal Joint Tube Assembly / Spline| 1
20| 4274-12| PTO Drive Shaft Assembly / Spline| 1
21| 4236-5| PTO Drive Pulley| 1
22| F009| 5/16-18 Whiz Locknut| 10
23| F013| 3/8-16 Whiz Locknut| 5
24| F032| 1/4-20 x 3/4 Hex Bolt| 2
25| F034| 5/16-18 x 3/4 Hex Bolt| 6
26| F035| 5/16-18 x 1-1/4 Hex Bolt| 2
27| F040| 3/8-16 x 1-1/2 Hex Bolt| 1
28| F041| 3/8-16 x 1-3/4 Hex Bolt| 1
29| F046| 3/8-16 x 3-1/2 Hex Bolt| 1
30| F051| 3/8 SAE Washer| 2
31| F093| 5/16-18 x 1 Hex Bolt| 2
32| F153| 3/16 x 3/16 x 1-1/4 Key| 1
33| F449| Washer 1/2 x 1-5/8 x 1/4| 1
34| F451| 1/2-20 Nylon Locknut| 1
35| F472| 1-14 LH Hex Nut| 1
36| F551| 5/16-18 Flange Top Lock Nut| 1
37| F569| 1/4-20 Flange Top Lock Nut| 2
38| F647| 5/16-18 x 2.0625 Hex Bolt GR 8| 1
MAIN COMPONENT POWER TRANSMISSION
ENGINE GROUP
ITEM
NO.| NO.| DESCRIPTION| NO.
REQ’D
---|---|---|---
Ground Drive Assemblies
1| | Oil Expansion Reservoir Mount| 1
2| 4023| Oil Expansion Reservoir| 1
3| 4010-17| Air Cleaner Mount| 1
4| 2351-50| Flex Coupler Half| 2
| | (Includes Items # F171 & F435)|
5| 2351-1| Rubber Iso Coupler| 3
6| 4349-12| Flanged Bearing (1″)| 1
7| 4026-9| Pulley (53804)| 2
8| 4240-1| Drive Pulley| 1
| 6349-2| (Includes Items # F065 & F171)|
9| | Flanged Bearing (3/4″)| 1
10| 4230-2| Ground Drive Belt| 1
11| 5841| Retainer Washer (3/8 x 1-1/4)| 1
12| 7201-3| Fiberglide Bearing| 2
13| 4245| Idler Pulley (3/A)| 1
14| 7201-5| Inner Race (2-1/4)| 1
15| 4325-13| Idler Arm (Includes Items # 12 & 17)| 1
16| 7364-2| Torsion Spring| 1
17| 5830-3| Grease Fitting (45 Deg.)| 2
18| 9430-1| Spacer Tube| 4
19| 2026-6| Hydro-Gear®| 2
20| 4025-35| Oil Filter (52114)| 1
21| 4026-35| Hydro-Gear ZT3100, LH| 1
22| 4407-4| Hydro-Gear ZT3100, RH| 4
23| 2028-5| Bow Tie Cotter Pin| 1
24| 2028-6| Lockout Arm, LH| 1
25| 2025-17| Lockout Arm, RH| 2
26| 5879-3| Straight Thread Hose Fitting| 6
27| M111| Hose Clamp (1/2)| 2
28| 8043-11| Hose (1/4 x 3-1/4)| 1
29| M111| 1/4 Barb Fitting “Y” Connector| 1
30| 5833-1| Cable Clamp (1/4 x 1/4)| 1
Wheel Assembly
46| 5075-3| LP Wheel & Tire Assembly (18 x 8.50-10)| 2
47| 5075-2| LP Tire (18 x 8.50-10)|
48| 5075-5| LP Wheel (10 x 7)|
49| 8075-4| LP Wheel & Tire (18 x 10.50-10)|
50| 8075-6| LP Tire (18 x 10.50-10)|
51| 8070-12| AT Wheel & Tire RH/LH (18 x 11.00-10)| **
52| 8070-13| AT Tire RH/LH (18 x 11.00-10)|
53| 8070-11| AT/LP Wheel (10 x 8.5)|
54| 5076-3| BT Wheel & Tire Assembly (20 x 10.00-10)|
55| 5076-4| BT Tire (20 x 10.00-10)| Δ
56| 5076-2| BT Wheel (10 x 7.00)| *
HYDROSTATIC GROUND DRIVE ASSEMBLIES
STEERING CONTROL ASSEMBLIES
ITEM
NO.| NO.| DESCRIPTION| NO. REQ’D
---|---|---|---
Steering Lever & FSC Assemblies
1| 5850-2| Handle Grip, Foam (5-1/2)| 3
2| 4170-2| FSC Lever| 1
3| 4219-1| Extension Spring| 1
4| 4170-3| FSC Linkage| 1
5| 5830| Grease Fitting| 2
6| 5146| 10mm Ball Stud| 4
7| 4199-4| Steering Lever Dampener Assembly| 2
8| 8201-3| Fiberglide Bearing| 4
9| 5463-4| Steering Lever Actuator| 2
10| 5665-1| Compression Spring (2-1/2)| 2
11| 2213| Control Rod (7)| 2
12| 2212-3| Seal Retainer| 2
13| 5214-2| Ball Joint (5/16-24) (Nylon Lined)| 2
14| 6212-4| Transmission Control Arm| 2
15| 4451-16| Steering Pivot Shaft W/Stop| 1
16| 6451-1| Speed Control Actuator, LH| 1
| | (Includes Items # 5 & 8)|
17| 7201-2| Fiberglide Bearing (1/2″)| 2
18| 5463-5| Steering Arm Pivot Bushing (SS)| 2
19| 5463-6| Washer 5/16 x 3/4 x .250| 2
20| 5453-14| Steering Lever Handle / Adjustable| 2
| | (Includes Items # 1, F188, F198 & F345)| 2
21| 6452-1| Steering Lever Tube W/Tab|
22| 5450| D-Clip| 2
23| 5222| Extension Spring (1/2 x 3-1/4)| 2
24| 4452-6| Steering Pivot (1/4-20 x 1-5/8)| 2
25| 9704-3| Pivot Rod Bushing / Plastic| 2
26| 4142-2| FSC Friction Washer| 2
| | (1-1/2 x 1-1/32 x 1/16)| 2
27| 5141| FSC Friction Washer (1-1/2 x 3/8 x 1/16)| 1
28| 4142-1| FSC Cam|
29| 6451-4| Speed Control Actuator, RH| 2
| | (Includes Items # 5 & 8)| 1
30| 4451-17| FSC Friction Actuator| 1
| F004| 1/4-20 Keps Nut| 2
| F005| 1/4-20 ESNA Nut| 2
| F008| 5/16-24 Keps Nut| 2
| F010| 5/16-24 ESNA Nut| 2
| F013| 3/8-16 Whiz Locknut| 4
| F024| 5/16-24 Jam Nut| 2
| F035| 5/16-18 x 1-1/4 Hex Bolt| 1
| F044| 5/16-24 x 3/4 Hex Bolt| 2
| F093| 5/16-18 x 1 Hex Bolt| 2
| F116| 1/4-20 x 1-1/4 Hex Bolt| 1
| F146| 1/4-20 Jam Nut| 1
| F167| 5/16-18 Hex Nut| 1
| F173| 5/16-18 x 3/4 Carriage Bolt| 1
| F183| .312 x .700 x .074 Washer| 4
| F188| 1/4-20 Self-Locking Nut| 4
| F192| 3/8-24 Self-Locking Nut| 1
| F198| .250 x .625 x .040 Washer, SS| 2
| F312| 3/8 x 3/8 Shoulder Bolt| 2
| F345| 1/4-20 x .770 Knurled Bolt| 4
| F385| 1/4 x 1-1/4 Roll Pin| 1
| F392| 1/4-20 x 1 Set Screw, SS| 1
| F407| Belleville Washer 3/8 x 1.187, SS| 1
| F551| 5/16-18 Flange Top Lock Nut| 2
| F571| 5/16-18 x 7/8 Carriage Bolt| 1
| F582| Washer 5/16 x 7/8 x .125| 2
| F620| 3/8-24 x 1-1/2 Hex Bolt| 1
STEERING CONTROL ASSEMBLIES
| ITEM NO. | PART NO. | DESCRIPTION | NO. REQ’D |
|---|
Seat Assembly
1| 6104-31| Comfort Seat| 1
2| 7440-5| Shock Mount (1-1/4 x 3/4)| 4
Body Assembly
3| 4100-9| Front Body| 1
4| 4100-7| Spacer (1/4 x 3/8 x 3/4)| 2
5| 5146| 10mm Ball Stud| 2
6| 4145-2| Gas Spring Assembly| 1
| | (Includes Item # 5)|
7| 5180| Edge Molding / Lever Opening| 2
8| 4504-2| Hinge (17″)| 1
9| 5989-18| Dome Plug (11/16)| 1
Body Latch Assembly
10| 7222| Extension Spring (1/4 x 3)| 1
11| 7383-12| Body Latch Hook, RH| 1
12| 7383-9| Body Latch Trigger| 1
13| 7383-13| Body Latch Hook, LH| 1
14| 5854| Plastic Tip| 1
Chassis Assembly
15| 5845| Rubber Bumper (1.50 x 1.25)| 2
16| 4910-7| Battery Mount| 1
17| 4301-13| Debris Shield| 1
| | (Includes Items # F004 & F029)|
18| 4215-10| Shock Mount / Body Lift Arm| 1
19| 4305-1| Chassis Frame| 1
20| 2046| Gas Tank Mount| 1
Spread Tail Wheel Assembly
21| 4401-4| Washer (1-3/4 x 3/8 x 1/4 Thk)| 1
22| 4301-2| Fiberglide Thrust Washer| 2
23| 4301-3| Fiberglide Bearing| 2
24| 4301-12| Tail Wheel Pivot| 1
| | (Includes Items # 23, 25 & 26)| 2
25| 5830| Grease Fitting| 1
26| 5830-4| Grease Fitting (90 Deg.)| 2
27| 8769-8| Dust Cap, Deck Caster| 4
28| 8769-6| Bearing Cone (1″ ID)| 4
29| 8769-5| Bearing Cup (2 x 1-5/8)| 2
30| 8769-7| Seal| 2
31| 8765-14| Caster Wheel Fork| 4
32| 8769-13| Bearing Cup (7/16 ID)| 4
33| 5037-1| Bearing, Tail Wheel| 2
34| 5038-3| Axle Spacer Tube (4.995) (.4375 ID)| 2
35| 8768-10| Caster Wheel, Pneumatic
(11 x 4-5 PR, BB)
(Includes Items # 32-34 & F634)
Tire, Pneumatic (11 x 4-5 6-Ply)| *
ELECTRICAL ASSEMBLY
ITEM NO.| PART NO.| DESCRIPTION| LOCATION| NO.
REQ’D SD
---|---|---|---|---
Walker Product and Operation Decals
1| 8600-48| RH Fender| Chassis, RH Side Near Seat| 1
2| 5800| Decal, Round (4″)| Rear Body (one on each side)| 2
| 5800-9| Decal, Round (4-3/4″)| Utility Bed (one on each side)| 2
3| 8600-65| LH Fender| Chassis, LH Side Near Seat| 1
4| 9804-1| Axle Lockout| Chassis| 2
5| 8821-31| Decal, B23| Chassis, Front| 1
6| 5856-1| Made In USA| Chassis, Front| 1
Danger Decals Warning Decals Caution Decals
7| 4107-13| Decal, Belt Routing| Front Body, Underside| 1
8| 8600-2| Decal, Rotating Components| Air Cleaner Mount| 1
9| 8600-12| Danger, Engine Exhaust| Rear Body, Underside or Utility Bed,
Underside| 1
10| 8600-5| Caution, Engine Exhaust| Rear Body or Utility Bed| 1
Maintenance Decals
11| 5855| Important, Engine Cooling| Body Support| 1
12| 6895-103| Kohler 300 Hour Oil| Body Support, LH Side| 1
13| 6875| PTO Alignment Arrow| Universal Joint Tube Assembly| 1
14| 8600-54| Decal, Ignition Switch| Front Body| 1
Refer to B23 Operator’s Manual for procedure for checking and changing oil
in Engine Crankcase.
NOTE:** See Model B23 Operator’s Manual (P/N 4000-44) for proper
lubrication intervals.
LUBRICATION POINTS
WIRING SCHEMATIC
LIMITED WARRANTY
FOR WALKER MODEL B23 RIDER MOWERS
- WHAT THIS WARRANTY COVERS, AND FOR HOW LONG:
Walker Manufacturing company will, at its option, repair or replace, without charge, any part covered by this warranty which is found to be defective in material and/or workmanship within two (2) years* after the date of sale to the original retail purchaser unless the product is used for rental purposes, in which case this warranty is limited to ninety (90) days. At Walker’s request, customer will make the defective part available for inspection by Walker and/or return the defective part to Walker, transportation charges prepaid. All parts and components of the Walker Mower are covered by this warranty except the following components which are warranted separately by their respective manufacturers:
Kohler Engine
Battery
The available warranties covering these items are furnished with each mower. Walker does not assume any warranty obligation, liability or modification for these items, which are covered exclusively by the stated warranty of the respective manufacturers noted above.
-
Extended warranties are offered for the following powertrain components:
• A two (2) year or 2000 hour (whichever comes first) warranty is offered for Hydro-Gear ZT3100 Hydrostatic transaxle; covers full cost of replacement up to 1000 hours of use, and after 1000 hours warranty coverage is prorated against 2000 hours.-
WHAT THIS WARRANTY DOES NOT COVER:
-
This warranty does not cover defects caused by depreciation or damage caused by normal wear, accidents, improper maintenance, improper use or abuse of the product, alterations, or failure to follow the instructions contained in the Operator’s Manual for operation and maintenance.
-
The customer shall pay any charges for making service calls and/or for transporting the mower to and from the place where the inspection and/or warranty work is performed.
-
HOW TO OBTAIN SERVICE UNDER THIS WARRANTY:
Warranty service can be arranged by contacting the dealer where you purchased the mower or by contacting Walker Manufacturing Company, 5925 East Harmony Road, Ft. Collins, CO 80528. Proof of the date of purchase may be required to verify warranty coverage. -
WARRANTY LIMITATION:
-
THERE IS NO OTHER EXPRESS WARRANTY. ANY WARRANTY THAT MAY BE IMPLIED FROM THIS PUR CHASE INCLUDING MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE IS HEREBY LIM ITED TO THE DURATION OF THIS WARRANTY AND TO THE EXTENT PERMITTED BY LAW ANY AND ALL IMPLIED WARRANTIES ARE EXCLUDED. Some states do not allow limitations on how long an implied warranty lasts, so the above limitations may not apply to you.
-
WALKER WILL NOT BE LIABLE FORANY INCIDENTAL, CONSEQUENTIAL, OR SPECIAL DAMAGESAND/- OR EXPENSES IN CONNECTION WITH THE PURCHASE OR USE OF THE MOWER. Some states do not allow the exclusion or limitation of incidental or consequential damages, so the above limitation(s) or exclusion(s) may not apply to you.
-
Only the warranty expressed in this limited warranty shall apply and no dealer, distributor, or individual is authorized to amend, modify, or extend this warranty in any way. Accordingly, additional statements such as dealer advertising or presentations, whether oral or written, do not constitute warranties by Walker, and should not be relied upon.
-
This warranty gives you specific legal rights, and you may also have other rights which vary from state to state.
-
WALKER MFG. CO. • 5925 E. HARMONY ROAD, FORT COLLINS, CO 80528 •
970-221-5614
FORM NO. 071123
PRINTED IN USA
www.walker.com
©2023 WALKER MFG. CO