Walker Edison Walnut Modern 3 Drawer Nightstand Installation Guide

June 7, 2024
Walker Edison

logo

Walker Edison Walnut Modern 3 Drawer Nightstand

product

GENERAL ASSEMBLY GUIDELINE:

  1. Ensure that all parts and hardware are available before beginning assembly.
  2. Follow each step carefully to ensure the proper assembly of this product.
  3. Two people are recommended for ease in the assembly of this product.
  4. The three type of hardware used to assembly this product are wood, dowels, screw and bolts.
  5. A phillips head screwdriver is required for assembly of this product.guide line
  6. Power tool should not be used to assembly this product.

PARTS LIST

parts

Part# Description Qty Part# Description Qty
1 Top panel 01 pcs 8 Back Panel 01 pcs
2 Left side panel 01 pcs 9 Front Drawer 03 pcs
3 Right side panel 01 pcs 10 Drawer Right Side 03 pcs
4 Small Front crossbeam 02 pcs 11 Drawer Left Side 03 pcs
5 Drawer runner 06 pcs 12 Drawer bottom 03 pcs
6 Side Foot 02 pcs 13 Drawer back 03 pcs
7 Front Foot 01 pcs

HAREDWARE LIST:

hardware list

STEPS:

Step 1

Insert Wooden dowel (E) into part (5).
Insert Wooden dowel (A) into part (4), (6), (10) and (11).

step 2

Insert Wooden dowel (A) into part (2) and (3).
Secure part secure part (5) to part (2) and (3) with screw (D).

Step 3,4

step 5

Secure part (1) to part (2) and (3) with screw (B).

step 6

Secure part (6) to part (2) and (03) with screw (D).

step 7

Secure part (7) to part (6) with hardware (G) and screw (C).

step 8

Secure part (5) to part (2) and (3) with screw (D).

step 9

Insert Wooden dowel (A) into part (5).

step 10

Secure back panel (8) to body with nails (F)

step 11

step 12

Secure hardware (H) part (9) with screw (J).

step 13

step 14

Maintenance Guide

To maintain long term performance and easy gliding of your solid wood drawers, we recommend applying wax to the wooden guide rails.

  1. Bee’s wax is recommended or Paraffin wax from a standard candle can be used.
  2. Apply the wax by rubbing it on the wooden guide rails where there is wood-on-wood contact when opening and closing the drawer. (Wax should be room temperature, do not melt the wax onto the wood)
  3. Wax should be applied every few months for the first year and then only when needed after that to keep the drawers sliding smoothly.

logo

Read User Manual Online (PDF format)

Loading......

Download This Manual (PDF format)

Download this manual  >>

Related Manuals