WALKER EDISON AZR4DDRCA Dresser 30 Caramel Installation Guide
- June 6, 2024
- Walker Edison
Table of Contents
WALKER EDISON AZR4DDRCA Dresser 30 Caramel
Keep these instructions for future reference.
General Assembly Guideline
Parts List
1 | Top panel | 01 pcs |
---|---|---|
2 | Right side panel | 01 pcs |
3 | Left side panel | 01 pcs |
4 | Bottom front crossbeam | 01 pcs |
5 | Back crossbeam | 02 pcs |
6 | Upper front crossbeam | 01 pcs |
7 | Back panel | 02 pcs |
8 | Right foot | 02 pcs |
--- | --- | --- |
9 | Left foot | 02 pcs |
10 | Front drawer | 04 pcs |
11 | Left side drawer | 04 pcs |
12 | Right side drawer | 04 pcs |
13 | Drawer bottom | 04 pcs |
14 | Drawer back | 04 pcs |
Hardware List
Hammer recommended for assembly (not included)
Installation Guide
Step 1
Step 2
Step 3
Step 4
Step 5
Step 6
Step 7
Step 8
Step 9
To adjust the drawer front position:
- Loosen the screw (part C) you used to install the drawer runner (either parts H or I) in step 2, to the side panel (parts 02 or 03), depending on the side (left or right), as shown.
- With the screw (part C) loosened, you can make the necessary slight adjustments (up or down) to the drawer runner to achieve the proper drawer alignment.
Once the drawer alignment is square, secure the position of the drawer runners (parts H & I) to the side panels (parts 02 & 03) by retightening the part C screw and adding the part B screw as shown.
COMPLETED ASSEMBLY
Wall anchor and hardware are included with this product.
Please make sure hardware is suitable for your walls before installing, as
different wall materials may require different types of anchors.
Read User Manual Online (PDF format)
Loading......