BaByliss PRO BNT9125TUC Professional Dual Ion Flat Iron User Guide

: June 15, 2024
: BaByliss PRO

Table of Contents

BaByliss PRO BNT9125TUC Professional Dual Ion Flat Iron
Product Usage Instructions
IMPORTANT SAFETY INSTRUCTIONS
OPERATING INSTRUCTIONS
GETTING KNOW
USER MAINTENANCE
FCC STATEMENT
WARRANTY
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

BaByliss PRO BNT9125TUC Professional Dual Ion Flat Iron

Product Usage Instructions

Safety Precautions

Keep out of reach of children
Read all instructions before using
Keep away from water to avoid burns, electrocution, fire, or injury to persons
Save these instructions for future reference

Using the Straightening Iron

Plug the straightening iron into a standard electrical outlet. It is not necessary to touch the iron with your hand to judge readiness.
Use the temperature controls to select the best setting for your hair type. Refer to the temperature settings chart below as a reference. The iron will heat up very quickly.
Section dry hair evenly and comb each section. Position the iron on the hair as far up as you want hair to be straightened, being careful not to let the iron touch the scalp.
Close the iron with the hair between the two plates and gently pull the iron down to the end of the section of hair you are straightening.
Repeat this process several times if necessary.
Let the hair cool before combing.

Styling Tips Using Straightener

For smoothing and taming curly hair or creating a stylish, smooth bob, use the straightener just on the ends, leaving the hair wavy at the roots for lift and body.
Keep the straightener moving while following the shape of your hairstyle.

IMPORTANT SAFETY INSTRUCTIONS

When using electrical appliances, especially when children are present, basic safety precautions should always be followed, including:

KEEP OUT OF REACH OF CHILDREN!
READ ALL INSTRUCTIONS
BEFORE USING.KEEP AWAY FROM WATER!

DANGER: As with most electrical appliances, parts are electrically live even when the switch is off. To reduce the risk of death by electric shock:

Always unplug immediately after using.
Always turn off the iron when not in use.
Do not use while bathing or in the shower.
Do not place or store appliance where it can fall or be pulled into a tub or sink.
Do not place in or drop into water or other liquids.
If the iron falls into water, unplug it immediately. Do not reach into the water.

WARNING: To reduce the risk of burns, electrocution, fire, or injury to persons:

Plug the iron into an electrical outlet.
The iron should never be left unattended when plugged in.
Do not pull, twist, or wrap cord around the iron.
This iron should not be used by, on, or near children or individuals with certain disabilities.
Use the iron only for its intended use as described in this guide.
Do not use attachments not recommended by the manufacturer.
Never operate this iron if it has a damaged cord or plug, if it is not working properly, or if it has been dropped or damaged or has fallen into water. Return the appliance to an authorized service center for examination and repair.
Keep the cord away from heated surfaces. Do not wrap the cord around the appliance.
Never block the air openings of the appliance or place it on a soft surface, such as a bed or couch, where the air openings may be blocked. Keep the air openings free of lint, hair, and the like.
Never use while sleeping.
Never drop or insert any object into any opening or hole in the iron.
Do not use outdoors or operate where aerosol (spray) products are being used or where oxygen is being administered.
Do not use an extension cord with the iron. Avoid multiple cables to a plug.
The iron and casing are hot when in use. Do not let eyes and bare skin touch heated surfaces.
Do not place the iron directly on any surface while it is hot or plugged in.
Do not touch hot surfaces of the iron.
This iron has no user-serviceable parts. Servicing should only be performed by an authorized service representative.
Suitable for dry locations ONLY.
Ensure the iron has completely cooled before being placed into any storage.
Do not use this appliance near bathtubs, showers, toilets, or any other receptacle containing water.
If the supply cord is damaged, it must be replaced by the manufacturer, its service agent, or similarly qualified persons in order to avoid a hazard.
This appliance is not intended for use by persons (including children) with reduced physical, sensory, or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety.
Children should be supervised to ensure that they do not play with the appliance.
Before plugging in, read the information about dual voltage contained in the “DUAL VOLTAGE” section of this manual.

SAVE THESE INSTRUCTIONS

OPERATING INSTRUCTIONS

This appliance is intended for professional or household use. Use on alternating current (50-60Hz) only. Standard appliances are designed to operate at rated voltage.

This appliance has a polarized plug (one blade is wider than the other). As a safety feature, this plug will fit into a polarized outlet only one way. If the plug does not fit fully into the outlet, reverse the plug. If it still does not fit, contact a qualified electrician. Do not attempt to defeat this safety feature.

DUAL VOLTAGE

This flat iron has dual voltage. It will automatically adjust to the proper voltage.
Use an adapter plug (not included) with correct configuration, prior to use in outlet.

CONTROL YOUR IONS

Dual ion ports, 2 Ion Emitters. 2x the Ions* for maximum ion output = maximum smoothness and shine with On/Off Ion Switch for styling flexibility.

ON – GREAT FOR CURLY AND COARSE HAIR. HELPS REDUCE FRIZZ, CONDITION AND STRAIGHTEN.
OFF – FOR SPECIALIZED SALON TREATMENTS (E.G., KERATIN TREATMENTS). GREAT FOR STRAIGHT HAIR, HELPS SMOOTH HAIR WITHOUT COMPROMISING VOLUME.

Based on 2 ion emitters

STRAIGHTENING BASICS

Plug the straightening iron into a standard electrical outlet. It is not necessary to touch the iron with your hand to judge readiness.
Use the temperature controls to select the best setting for your hair type. You can use the chart below as a reference. The iron will heat up very quickly.
TEMPERATURE SETTINGS HAIR TYPE

300˚F (150˚C)                                    Fragile, very fine hair
340˚F (170˚C)                                    Thin, easy-to-straighten hair
375˚F (190˚C)                                    Normal-textured hair
410˚F (210˚C)                                    Wavy or curly hair
450˚F (230˚C)                                    Coarse, very thick hair
Section dry hair evenly, and comb each section. Position the iron on the hair as far up as you want hair to be straightened, being careful not to let the iron touch the scalp. Close the iron with the hair between the two plates and gently pull the iron down to the end of the section of hair you are straightening. Repeat this process several times, if necessary. Let the hair cool before combing.

STYLING TIPS USING STRAIGHTENER

For smoothing and taming curly hair, or creating a stylish, smooth bob, use the straightener just on the ends, leaving the hair wavy at the roots for lift and body. For this type of effect, keep the straightener moving while following the shape of your hairstyle.

NANO TITANIUM™

Your Nano Titanium™ straightening iron has many benefits. Titanium is an exceptional conductor of heat and is stable in ultra-high temperatures. The titanium technology helps provide the ultimate heat performance for beautiful, healthy-looking hair. Titanium’s lightweight and smooth surface helps reduce straightening time and hand fatigue and is exceptionally resistant to chemical corrosion. This Nano Titanium™ iron will give your hair a smooth, silky shine while eliminating frizz.

GETTING KNOW

GET TO KNOW YOUR DUAL ION FLAT IRON

NOTE: LOCKING BUTTON IS FOR STORAGE ONLY.

NOTICE

THIS PRODUCT IS EQUIPPED WITH AN INSTANT HEAT CIRCUITRY. STATE-OF-THE-ART TECHNOLOGY ALLOWS THE HEATER TO REACH THE OPERATING TEMPERATURE IN LESS THAN ONE MINUTE.
DO NOT LEAVE PRODUCT ON OR PLUGGED IN WHILE NOT IN USE. UNIT WILL BURN OUT IF POWER IS KEPT ON FOR AN EXTENDED PERIOD OF TIME. WARRANTY WILL BE VOIDED.
TURN UNIT OFF AND UNPLUG WHEN NOT IN USE.

USER MAINTENANCE

Your iron is virtually maintenance free. No lubrication is needed. Keep all vents and openings clear of dirt and dust. If cleaning becomes necessary, disconnect the unit from the power source, let it cool, and wipe exterior with a cloth. If any abnormal condition occurs, unplug the unit, allow it to cool, and return it for repair to an authorized service representative only. No repairs should be attempted by the consumer.

CAUTION

NEVER allow the power-supply cord to be pulled or twisted. Never wrap the cord around the unit. Damage will occur at the high flex point of entry into the unit, causing it to rupture and short circuit. Inspect the cord frequently for damage. Stop use immediately if damage is visible or if unit stops or operates intermittently.

STORAGE

When not in use, your appliance is easy to store.
Allow unit to cool, then simply put back in the box, and store out of reach of children in a safe, dry location.
Do not jerk or strain cord at plug connections.

FCC STATEMENT

FEDERAL COMMUNICATIONS COMMISSION NOTICE

WARNING: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

This device may not cause harmful interference
This device must accept any interference received, including interference that may cause undesired operation.

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.

SUPPLIER’S DECLARATION OF CONFORMITY

Brand: BaBylissPRO®
Model No: BNT9125TUC
Description: Dual Ion Flat Iron
Responsible Party: Conair LLC 1 Cummings Point Road Stamford, CT 06902 203-351-9000
Standards: FCC Part 15 Subpart B, ANSI C63.4-2014

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

This device may not cause harmful interference
This device must accept any interference received, including interference that may cause undesired operation.

DATE OF ISSUE: 03/31/2022

WARNING: IF YOU THINK THE POWER IS OFF WHEN THE SWITCH IS OFF, YOU’RE WRONG.

KEEP AWAY FROM WATER.

Everyone knows that electricity and water are a dangerous combination, but did you know that an electrical appliance is still electrically live even if the switch is off? If the plug is in, the power is on. So when you are not using your appliances, keep them unplugged.

ALWAYS UNPLUG
SMALL APPLIANCES

WARRANTY

HASSLE-FREE 4-YEAR WARRANTY

This warranty is available only to consumers who purchase products directly from BaBylissPRO or an authorized BaBylissPRO reseller. Except as otherwise required under applicable law, this warranty is not available to retailers or other commercial purchasers or owners or consumers who purchase from unauthorized BaBylissPRO resellers.

BaBylissPRO will repair or replace (at our option) your unit free of charge for 48 months from the date of purchase if the appliance is defective in workmanship or materials and was purchased directly from BaBylissPRO or an Authorized BaBylissPRO Reseller.
Your ultimate satisfaction in BaBylissPRO products is our goal so if your item should fail within the generous warranty period, we will repair it and or if necessary, replace it at no cost to you. To obtain a return shipping label email us at https://babylisspro.com/warranty-page. Or call our toll free customer service department at 800-326-6247 to speak with a representative.

In the absence of a purchase receipt, the warranty period shall be 48 months from the date of manufacture. ANY IMPLIED WARRANTIES, OBLIGATIONS, OR LIABILITIES, INCLUDING BUT NOT LIMITED TO THE IMPLIED WARRANTY OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, SHALL BE LIMITED IN DURATION TO THE 48-MONTH DURATION OF THIS WRITTEN, LIMITED WARRANTY. Some states do not allow limitations on how long an implied warranty lasts, so the above limitations may not apply to you. IN NO EVENT SHALL BABYLISSPRO BE LIABLE FOR ANY SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES FOR BREACH OF THIS OR ANY OTHER WARRANTY, EXPRESSED OR IMPLIED, WHATSOEVER.

Some states do not allow the exclusion or limitation of special, incidental, or consequential damages, so the above limitation may not apply to you. This warranty gives you specific legal rights, and you may also have other rights, which vary from state to state.

SERVICE CENTER