NEMO ZIRKOL GAP-D-B 0 Gap Light Instruction Manual
- June 15, 2024
- NEMO
Table of Contents
Mounting Instructions
Instruction Manual
ZIRKOL GAP-D/B
0,85/1M/1,5M
UP-DOWNLIGHT
Box contents
Example of connection
2. Insert the metal cable into the insert provided| 3. Secure the insert
following the numbering
---|---
4. Insert the metal cables into the grippers and adjust the height| 5. Insert the power cable into the hole in the rose plate
6. Insert the power cable in the turret 1 of the canopy
Connection 110-240V
Lamp connection (24V)
7. Canopy closure
CAUTION
INDOOR LUMINAIRE
Installation should be carried out by a suitable qualified installer. /
Disconnect main voltage before maintenace operation / All wiring and
maintenance must be performed with the main switch in the OFF position / Don’t
open the luminaire.
Connect the fitting to the power supply only after connecting all LED to the
driver (when expected) / In case of failure, upon a return authorization of
NEMO Studio, the product will be not neither open or dismounted / Make the
wiring using a system that guarantees at least the IP grade of the spot. / Se
previsto, use only bulbs of suitable type and power specified in the label / Do
not install fixture in environment with presence of chlorine, salt air or
aggressive agents, if not expressly mentioned. / The color temperature (CCT)
of LED sources can be different from the declared nominal value within a range
of ±5%. / NEMO reserves the right to make any technical or formal alterations
to its products without giving prior notice, especially for LED sources. / We
ecommend you to keep instructions for further consultations.
EQUIPMENT DISPOSAL
This lamp has been manufactured according to Directive EU 2012/19/EU.
In accordance with EU Directive WEEE (Waste Electrical and Electronic
Equipment), luminaires must not be disposed of with other household waste. At
the end of their life, luminaires must be taken to the appropriate local
facility available for the disposal or recycling of electronic products.
LIGHTING CLEANING SAFETY INSTRUCTIOS
-Periodically clean the surface of the spot. Before starting, switch the light of.
For Plastic parts – Glass Painted parts:
- Remove the dust surface layer with latex gloves and soft electrostatic lint-free cloth.
- Clean with a soft and moist cloth with circular movements.
- Avoid using aggressive detergents. Use only neutral products (PH 7).
Note: for plastic parts use only antistatic alcohol-free soap. For aluminum parts, clean with a soft cloth.
Lamping
This luminaire contains built-in LED lamps.
The LED, the cables and the driver cannot be changed in the luminaire from the
end-user.Please contact NEMO STUDIO (only authorized center).
This product contains a light source of energy efficiency class 
Ilti Luce Srl – Strada Borgata Paradiso 20 – 10036 Settimo Torinese (TO) ITALY
Tel +39 011 7657301
nemostudio@nemolighting.com –
nemolighting.com
Copyright © 2020 NEMO Srl Milano, Italia.
The text and images are protected by copyright.
Unauthorized reproduction.
Versione 1.0
Data ultimo aggiornamento 14/03/2022
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>