WOOX R7279 Smart Switch Module User Guide

June 13, 2024
woox

WOOX R7279 Smart Switch Module

WOOX R7279 Smart Switch Module

Take As Global, SL hereby confirms that the R7279 Smart Switch Module complies with Directive 2014/53 / EU. The full text of the EU Declaration of Conformity is below internet address available: www.wooxhome.com

Compliance with the WEEE Directive and waste disposal. This product has been manufactured from parts and materials of high quality that can be reused and can be recycled. Therefore, do not throw this product away with waste normal household appliances at the end of their useful life. Take him away at a collection point for recycling equipment electric and electronic. This is indicated by this symbol on the product, in the user manual and on the packaging. Please consult the local authorities to find out where the point of nearest collection. Help protect the environment by recycling used products.

The packaging materials of the product are made in accordance with our national environmental regulations made from recyclable materials made. Packing materials not together with dispose of with household waste or other waste. Bring them to the collection points prescribed by the local authorities for packing material.

Tech support

If you need futher help or have comments or suggestions please visit: www.wooxhome.com or FAQ & Feeback page in the App.

Tech support contact:
European: support@wooxhome.eu, +31-(0)76-7114805
Non-EU: support@wooxhome.com

How to use FAQ & Feedback in the App:
Step 1: Navigate to “Me” > “FAQ & Feedback”.
Step 2: If “Most Asked” and FAQ not help, you could submit your question via “Feedback/Suggestions’ we will reply you in 24 hours.

Specification

  • Voltage: 90-250V~50/60Hz
  • Max.load(Resistive): 10A/2300W total – Max.load(LED): 1A/230W
  • Weight: 43.2g – Dimensions: 52x47x22mm
  • Wireless connection: 802.11 b/g/n 2.4GHz WiFi
  • Frequency: 2.412~2.472GHz
  • Working temperature: 0°C- 40°C
  • Working humidity: :S95%RH, no condensation

Safety

  • To reduce risk of electric shock, this product should only be opened by an authorized technician when service is required.
  • Disconnect the product from the equipment if a problem should occur.
  • Read the manual carefully before use. Keep the manual for future reference.
  • Only use the device for its intended purposes.
  • Do not use the device for other purposes than described in the manual.
  • Do not use the device if any part is damaged or defective. If the device is damaged or defective, replace the device immediately.
  • The device is suitable for indoor use only. Do not use the device outdoors.
  • Do not expose the product to water or moisture.
  • Do not touch the device with wet hands.

Cleaning and maintenance

Warning

  • Do not use cleaning solvents or abrasives.
  • Do not clean the inside of the device.
  • Do not attempt to repair the device. If the device does not operate correctly, replace it with a new device.
  • Clean the outside of the device using a soft, damp cloth.

Frequently Asked Questions

  1. Can I share Smart Switch Module with family and friends?
    Yes, you can share your Smart Switch Modules with family. In the app, click the Family name at the top and click on the”Home Management”button, and you will be able to give or revoke sharing permissions.
    In order to share, the other user should already have downloaded the app and registered a new account.

  2. What’s the Wireless Range?
    The range of your home Wi-Fi is heavily dependent on your home router and the conditions of the room. Check with your router specifications for exact range data. Typically it’s 10-30 meters in room.

  3. How many Smart Switch Module can I control?
    WOOX Home app can control an unlimited amount of devices in an unlimited amount of locations. Your router may have a limit of how many devices can be connected to one router.

  4. My device can’t be connected to network with App

  5. Make sure the device is under the config status (indicator light is flashing quickly).

  6. Make sure the Wi-Fi is avaliable and the device is not far away from the router.

  7. Make sure the Wi-Fi password you input is correct.

  8. My device shows offline in my App

  9. Make sure the device is powered on.

  10. Make sure the network is stable and the Wi-Fi name and password not modifed. If not, add device again.

  11. If the network is normal, but its still offine. Check if there are too many Wi-Fi connections. You can restart your router to check the status of the device.

WOOX R7279 Smart Switch Module 2

WOOX Home Youtube Channel
You could also find WOOX product videos in Youtube by searching “woox home” or “WOOX + model number”.

Facebook group support
We also create a facebook group for technical support. Searching “WOOX HOME users” to join the group and leave your question.

WOOX Home app QR code

WOOX R7279 Smart Switch Module 3

Product Appearance

WOOX R7279 Smart Switch Module 4

Wiring Instructions and Diagrams

  1. Turn off the power supply before carrying out any electrical installation work.
  2. Connect wires according to the wiring diagram.
  3. Insert the module into the junction box.
  4. Connect the power supply and follow switch module configuration instructions.

Wiring Diagram

With one 2 Gang switch

WOOX R7279 Smart Switch Module 5

With 2 Gang 2 Way switch

WOOX R7279 Smart Switch Module 6

With Wall Socket

WOOX R7279 Smart Switch Module 7

Installation

Step 1:

  • Turn off the circuit breaker and use the electrical tester to test the power.
  • Ensure the ff before w g.

WOOX R7279 Smart Switch Module 8

Attention: Please disconnect the power supply before installing or removing the device for avoiding irreversible damage on the device from the electric current or some unpredictable problems such as lamp flashing. Check the wiring diagram op page 8 & 9 before installation.

Step 2: Remove the old switch.

WOOX R7279 Smart Switch Module 9

Step 3:

  1. Remove the switch and pull it away from the wall. Identify Live Wire.
    Verify power is off:

  2. We recommend you remove the faceplate from the old switch and use an electrical tester to test all wires connected to the switch to ensure there is no voltage in the circuit. You may need to turn off more than one circuit breaker.
    Warnings: Installation must be carried out by a qualified electrician in accordance with local regulations.

  3. Keep the device out of the reach of children.

  4. Keep the device away from water, damp or hot environment.

  5. Install the device away from strong signal sources such as microwave oven that may cause signal interruption resulted in abnormal operation of the device.

  6. Obstruction by concrete wall or metallic materials reduce the elective operation range of the device and should be avoided.

  7. Do NOT attempt to disassemble, repair or modify the device.

Requirement to use

  • WOOX Home app
  • WLAN-enabled router: 2.4GHz (Separate band)

Set up Smart Switch Module to WOOX Home app

  1. Download and install the app “WOOX Home” from Apple App Store or Google Play Store on your smartphone.
  2. Open bluetooth on smartphone.
  3. Enable bluetooth and location permission for WOOX Home app, so that the app can find Smart Switch Module via bluetooth.
  4. Launch the app “WOOX Home”.
  5. Create a new account or log in to your existing account.
  6. Tap”+” to add the device.
  7. Ensure the smart switch module is in pairing mode: you can hear beep sounds continuously. If there is no sound, there is 3 methods to reset the module:
    • Using pair button in the module: press and hold the pair button on the module for 8 seconds until you hear the beep sounds continuously.
    • For reset switch (Set as reset switch in APP): press the switch button for 10 times to hear the beep sounds continuously.
    • For rocker light switch (Set as rocker switch in APP):press the switch button for 10 times(ON/OFF cycle for 5 times) to hear the beep sounds continuously.
  8. Note: This WiFi switch module fits for rocker light switch and reset switch meanwhile. Please pay attention to the different pairing modes. Confirm the Wi-Fi network and password. Note: only 2.4GHz Wi­Fi is supported.
  9. The app will now search for the device and register it to your account.
  10. Enter the device name. Note: The device name will also be used by Amazon Alexa and Google Home.

Read User Manual Online (PDF format)

Loading......

Download This Manual (PDF format)

Download this manual  >>

Related Manuals