WOOX R9044 Smart Outdoor Camera User Guide
- June 6, 2024
- woox
Table of Contents
WOOX R9044 Smart Outdoor Camera User Guide
Product Overview:
Package includes:
- Smart Outdoor camera x 1
- USB cable x 1
- Cover kit for connector x 1
- User manual x 1
- Power Adatper x 1
- screw bag x 1
- Security sticker x 2
Specification
- Power: DC 5V/1A (power adapter is included)
- Resolution: 1920x1080P
- IR distance: up to 10 meters
- Angle of View: 104°
- Audio input: Built in Mic
- Audio output: Built in speaker
- Two-way talk: support
- Motion detection: support
- Micro SD card: Max. 128G (not included)
- Network: 2.4GHz Wi-Fi and RJ45 10/100M
- Waterproof: IP65
- Working temperature: -20℃ – 50℃
- Working humidity: 10%-95%RH, no condensation
- Dimension: 68x68x119mm
Introduction
WOOX Smart Outdoor Camera is a Full HD 1080P security camera with features including two-way audio, motion detection, night vision, local and cloud storage, , IP65 waterproof, works with Echo Show and Google Nest Hub, and more.
Requirement to use:
- Woox home app
- WLAN-enabled router: 2.4GHz (Separate band)
Installation
-
Rotate and open the base
-
Screw fixed to the wall.
-
Rotate and close the top cover of the base and install the device.
Set up the smart oudoor camera with the WOOX Home app
-
Download and install the app “WOOX Home” from Apple App Store or Google Play Store on your mobile device.
-
Launch the app “WOOX Home”.
-
Create a new account or log in to your existing account.
-
Tap “+” to add the device.
-
Select the applicable product type from the list of products.
-
Ensure the indicator light is quick flashing (flashing 2 times per second). If the indicator light isn’t flashing: hold and press the reset button on the bottom of camera until the indicator light starts to flash.
-
Confirm the Wi-Fi network and password.
Note: only 2.4GHz WiFi is supported. -
The App will prompt you to scan a QR code that needs to be read by the camera in the smart outdoor camera to initiate pairing, press continue on the App and a QR code should now be generated to pair the product to your account. Position your mobile or tablet device in front of thecamera lens and ensure the QR code is in full frame of view, once you hear the sound prompt confirm this on the App, this will commence the final stage of pairing the smart outdoor camera to your account.
-
The app will now search for the device and register it to your account.
-
Enter the device name.
NOTE:
- The device name will also be used by Amazon Alexa and Google Home.
- The device supports both Wi-Fi and Ethernet LAN network, above instructions are for WiFi connection. If you wish to use Ethernet LAN connection, please select the “cable mode” in the right top corner in app at step 6.
Support
If you need fur ther help or have comments or suggestions please visit www.wooxhome.com