Remington SAR5924LRD Long Range Safe Instruction Manual

: August 16, 2024
: Remington

LONG RANGE
INSTRUCTION MANUAL
SAR5924LRD, SAR5936LRD,
SAR5948LRD, SAR5980LRD

SAR5924LRD Long Range Safe

IMPORTANT
Please read this information and follow a safety rules carefully before operating your security safe. Failure to do so will void your warranty.

WARNING

Tip Over Hazard
A child or adult can tip the safe and be killed or seriously injured.
Failure to secure the safe as shown in these instructions can result in death or serious injury to children and adults.
Children should not play with or around the safe at any time.

www.remingtonsafes.com

DISCLAIMER – READ BEFORE SAFE SETUP

PLEASE READ THIS INFORMATION CAREFULLY BEFORE OPERATING YOUR REMINGTON SAFE.
DO NOT LOCK THIS MANUAL OR THE OVERRIDE KEYS IN YOUR SAFE.

Thank you for choosing a Remington safe to protect your valuables. We are committed to securing, organizing and protecting your most important documents, valuables and keepsakes.
Your safe is built to last a lifetime. However, please understand that the locking mechanism has precision parts. If you experience ANY difficulty opening or closing your sate DO NOT FORCE THE SAFE OPEN. Doing so may jam the components in the lock, which will require a safe technician to unlock your safe. This causes an inconvenience to you and may lead to a claim denial.
If you experience problems or challenges with your safe, please contact us. Many issues can be quickly resolved without the product being returned.

Contact Customer Service at cs@saproducts.com or 888-792-4264

SAFETY

Safe bodies and doors are extremely heavy thus SA Consumer Products requires a minimum of 2 or 3 people to ensure stability of the sate during installation. Always ensure proper installation, as laid out in this manual, and do not open the door with the safe on an uneven or unstable floor. Ignoring this could result in serious injury or death.

FIREARM STORAGE

If you choose to utilize this safe to store a firearm, always follow proper firearm and local laws.
SA Consumer Products strongly recommends that you do not store loaded firearms.
Always follow the firearm satety rules set out by the firearm’s manufacturer.
A Remington safe or any other firearm storage device cannot take the place of other safety procedures including advising children of the dangers of firearms.
SA Consumer Products and its distributors of the Remington safe do not recommend, suggest, advise, promote, or otherwise condone the ownership or use of firearms. We believe the decision to own or use a firearm is a serious decision that should only be made by an adult who has carefully considered the risks and benefits of such a decision.

REGISTRATION

Register your safe at www.remingtonsafes.com

By registering your Remington safe we will be able to expedite and address any problems or challenges you may have which would otherwise require a notary letter and proof of payment. You can scan the QR Code to take you directly to the Remington registration page.

https://qrco.de/bd8Frz

REGISTRATION INFORMATION
The intormation you record onto this page will be required in the event you cannot access the contents of your Remington safe. Please fill out all the required information below and retain for your records and safe keeping.

PLEASE HAVE THIS INFORMATION READY PRIOR TO CALLING FOR TECHNICAL ASSISTANCE AT:

CONTACT CUSTOMER SERVICE AT 888-792-4264

PURCHASE DATE:
PURCHASE PRICE (BEFORE TAX):
MODEL NUMBER:
SERIAL NUMBER:
RETAILER NAME:
KEY NUMBER (IF APPLICABLE):

UNDERSTANDING YOUR SAFE

UNBOXING

WARNING: SAFES ARE HEAVY AND CAN BE UNSTABLE ON UNEVEN GROUND.
PLEASE ENSURE EXTRA CAUTION WHEN DEALING WITH OR MOVING UNSECURED SAFES. WHILE UNBOXING BE SURE TO HAVE A SECOND PERSON HOLD AND STABILIZE THE SAFE TO KEEP IT FROM TIPPING, CAUSING INJURY, AND/OR
DAMAGE TO THE SAFE AND SURROUNDING STRUCTURES.

Remove the packaging. If your safe is still on shipping feet you can simply lift the box up and off the safe once the strapping has been removed. You will want to have someone stabilize the safe when removing the cardboard and other packing material from underneath the safe

Before discarding package material, please be certain you have located and saved the “Getting Started Box” located in the front of the honeycomb corrugate front protection panel.

INSPECTION

Make sure to inspect your safe for shipping damage before accepting delivery.
If you find any damage, please contact the delivery company (or carrier) immediately.
Any damage not noted upon delivery must be reported within fifteen (15) days or there will be no recourse. Any noted damage at the time of delivery must be resolved with the delivery company and/or retailer. Shipping damage is not warrantable by SA Consumer Products.

INITIAL ENTRY

Locate the quick start guide, override key, battery and spoke inside the Getting Started Box on the front of the safe corrugate protective front cover.
Install the single handle spoke by inserting into one of the threaded openings and twisting clockwise until you feel the spoke Tully lock into place.
Locate the keyhole in the safe door.
Insert and turn the backup key clockwise to unlock.
Rotate the handle clockwise until the safe door opens.
Set the provided override key aside in a sate place.
NOTE: Do not store override keys inside your safe.
Now that your safe is open, you will tind a Welcome Box inside your sate. You will find your remaining spokes inside that box.
Insert each individual spoke into a threaded opening and turn clockwise to install.

LOCK FACE & BATTERY INSTALLATION

Locate the lock face in the Welcome Box.
Locate the 1x9V battery in the Getting Started Box. Install into the battery compartment on the back of the lock face in the proper orientation. The touch pad will beep when batteries are successfully installed.
WARNING: The batteries must be inserted with the correct polarity. Exhausted batteries must be removed from the product and discarded safely. Do not use rechargeable (nickel — cadmium) batteries. Duracell and Energizer batteries are highly recommended.
Plug the electronic lock cable into the back of the lock face. The connector on the cable will only fit into the connector in the lock face in one way.
Align the lock face to the backer plate, with the lock face slightly rotated to the left. Turn clockwise until you Teel the lock face click into place.

E-LOCK SECURITY CODE SETUP

Important: Your safe comes programmed with a factory code of [15 9 # ]. It is necessary to re-program your safe with a new security code you have personally selected to provide maximum household security. Be careful in choosing your new security code, you’ll want to be sure that you can operate the unit quickly without making an error.

Tap the keypad to “wake up” the lock face. Insert the factory preset code of (1 -5-9-). This will unlock the safe in a DEFAULT MODE. (DO NOT use this code while securing items in your safe)
*Note: if your safe is still open, you can skip this step and go to #2.
Inside of the safe door, locate the small cap. Unscrew and remove the cap, you will now see the reset button. Press and release the reset button. You will hear 2 beeps. The yellow (left) light on the lock face will illuminate indicating you are now in programming mode.
While the yellow (left LED) is illuminated, enter your new 3 to 8-digit security code followed by [*]. Lock face will beep twice indicating successful programming. Continue to Step 4 on the next page.
While the safe door is still open, confirm your newly entered security code. Tap to wake up the keypad. Now enter your new 3-8 digit code followed by (#). If successful you will hear 2 beeps and the green light will illuminate, allowing you to open the safe.

Note: Do not shut the safe door until you have confirmed your new security code at least 3 times, ensure your code has been saved and you can open the door successfully. If the code fails, the yellow (left) light will flash and beep. Repeat the steps above until successful.
WARNING: If the incorrect security code is entered 3 times you will have an automatic lockout for 30 seconds before you can enter your code again. If 3 additional failed attempts are made, the lock face will lockout for 5 minutes. Leave batteries in to go through lockout cycle. If batteries are removed the timer will restart zero.

LOW BATTERY WARNING

This lock face is equipped to alert you when the batteries are low by illuminating the red light (center) when any button is pressed on the keypad. Please replace batteries immediately when receiving this warning.
Always test the batteries when installing or replacing. If the red light comes on when a button is pressed you know the batteries are not fully charged.

LOCK FACE QUIET MODE

By activating the lock face quiet mode, the sate will no longer make audible sound when interacting with sate, allowing for silent access. Always test the batteries when installing or replacing.
To mute the lock face, enter the code [ 63 3 ].
To turn the sound back on, enter code [ 6 6].

PROPER PLACEMENT AND MOVING OF SAFE

WARNING: SAFES ARE VERY HEAVY AND AWKWARD TO HANDLE. PLEASE USE THE UTMOST CARE IN MOVING THE SAFE. UTILIZING A TRAINED PROFESSIONAL WITH PROPER MOVING EQUIPMENT IS HIGHLY RECOMMENDED.
The location of the executive safe is very important and the utmost care should be taken during this consideration.

To maximize the fire protection of your safe, we recommend you place the safe in lower levels in your home where fire temperatures are lower and away from highly combustible materials.
To maximize burglary protection and stability, securing the safe to the floor is recommended.
SA Consumer Products recommends that you store your safe in a closet, office, basement, bedroom or any other location that is convenient for you but out of direct line of sight from prying eyes. The location of the safe is very important.
SA Consumer Products requires the safe is secured to the floor to ensure safe does not tip over in case ot a flood. Failing to secure your safe properly to the floor per instructions will void the Warranty of the Safe.
Using a dolly capable of supporting the size and weight of your safe, move the safe
to your desired location. Please take all necessary precautions to protect and prevent any damage to your flooring.
HELPFUL: TO DETERMINE WHETHER YOUR SAFE WILL MAKE IT THROUGH DOORWAYS, STAIRS, OR CORNERS, TAKE THE EMPTY SAFE BOX AND SEE IF IT WILL FIT ALL THE WAY THROUGH TO ITS FINAL LOCATION.
The safe should be installed adjacent to a side wall with minimal space on either side of the safe. Wherever possible, the safe should be flat against the wall and floor. Remove the baseboard and/or wall trim if necessary.
Always ensure the safe is in an isolated and dry area. Never place the safe in direct contact with a wet tloor. When installing your safe on a concrete floor, use of a moisture/protective barrier is highly recommended. Failure to do so, or exposing the safe to chemicals or other adverse environments, may void the warranty.
If your sate seems unlevel, you may need to shim the bottom of the sate to prevent the door from swinging open too quickly, or closing on it self..

KEEPING YOUR SAFE DRY

We recommend placing a moisture/protective barrier between your safe and concrete floor to prevent any moisture, mildew and rust damage to the safe.
Installing your safe in a place with climate control (heat in the winter and cooling in the summer) is highly recommended. In areas of high humidity or frequent temperature fluctuations (garages) it is recommended to take appropriate precautions to ward against moisture damage. We strongly encourage the use of an internal dehumidifier and/or desiccants to protect your contents from rust or mildew. Internal dehumidifiers should not be in direct contact with the side or back walls.

SHIPPING AND SKID REMOVAL (IF APPLICABLE)

WARNING: WHILE REMOVING THE BOLTS FROM THE SKIDS, BE SURE TO HAVE A PERSON HOLD AND STABILIZE THE SAFE TO KEEP IT FROM TIPPING, CAUSING INJURY, AND/OR DAMAGE TO THE SAFE AND SURROUNDING STRUCTURES.
WARNING: BEFORE REMOVING THE SHIPPING SKIDS, MAKE SURE THE DOOR IS CLOSED AND LOCKED. THE DOOR OF YOUR SAFE IS HEAVY AND PRESENTS A SAFETY HAZARD UNTIL THE SAFE IS BOLTED DOWN OR SECURED PROPERLY.

Upon receiving your sate, you may find it attached to a shipping skid. The skid is secured from the underside of the sate by four bolts. Remove the four bolts that secure the safe to the skids using a wrench or 3/4” (19mm) socket.
With a person stabilizing the safe, carefully tilt the safe to the left and pull the shipping skid on the right side away from the bottom of the safe.
With the shipping skid removed from one side of the safe, carefully lower the sate to the floor.
Follow the same procedure to remove the remaining shipping skid.

SECURING YOUR SAFE

WARNING: YOUR SAFE IS DESIGNED TO SUPPORT ITSELF WHEN THE DOOR IS OPENED. HOWEVER, CAUTION SHOULD BE USED TO AVOID TIPPING. WHILE SECURING YOUR SAFE BE SURE TO HAVE A SECOND PERSON HOLD AND STABILIZE THE SAFE TO KEEP IT FROM TIPPING, CAUSING INJURY, AND/OR DAMAGE TO THE SAFE AND SURROUNDING STRUCTURES. FAILURE TO DO SO WILL COMPROMISE THE SAFETY, SECURITY, AND WARRANTY OF THE SAFE.

TOOLS NEEDED TO BOLT SAFE TO A CONCRETE SURFACE

DRILL 7 HAMMER DRILL
SAFETY GLASSES
DRILL BIT — 5/16” (8mm)
GLOVES
WRENCH- 1/2” (13mm)
OTHER SAFETY EQUIPMENT AS NEEDED

Use the hardware provided or consult your hardware retailer for fastening hardware for your particular mounting surface.
Open your safe door and locate and remove the four black caps on the sate floor. This will provide access to the factory drilled bolt down holes.
To secure your safe to the floor it will first be necessary to drill pilot holes in the floor surface. These should be aligned with / through the factory drilled bolt down holes.
Drill the appropriate diameter and depth of pilot holes based on the type of hardware being used and the type of floor surface. For the hardware provided (concrete floor installation) we recommend using a hammer drill and 5/16” concrete drill bit to drill the four (4) corresponding holes in the concrete floor.
Secure the sate, by threading all 4 anchor bolts through the factory drilled bolt down holes in the bottom of the safe and ratcheting down tight.
● Make sure the metal washer sits on top of the rubber washer. Tighten the bolt to compress the rubber washer between the safe and metal washer.
Failure to do so will allow water to enter the safe in the event of a flood. Failing to secure your safe properly to the floor per instructions will void the Warranty of the Safe.
Replace the four black caps on the floor of the safe.

LOCKED OUT OF YOUR SAFE

In the event you have forgotten the security code, your primary action will be to use your override keys in order to gain access to your sate and follow the Programming Your Security Code instructions.
If you have lost your backup keys, you will need to contact customer service at the number below. Proof of purchase is required to obtain keys.

CONTACT CUSTOMER SERVICE AT888-792-4264

LOADING YOUR SAFE

Store documents or heat sensitive items in the bottom of the safe for greatest protection against fire damage.
Store ammunition separately from valuables.
Do not put anything in your safe that will put pressure against the door when it is closed.
Select safe models have reinforced shelving, but as a good safety precaution store heavier items either on the floor of the safe, or away trom the middle of the shelves.
When placing firearms into your safe, make sure they rest securely against the cutouts provided in the barrel rests to prevent accidental tipping when the door is closed.

MAINTENANCE

The hinges and internal locking mechanism are permanently lubricated, thus needing no maintenance. Opening the door panel of your safe may void your warranty. Always consult our customer service experts prior to doing so.

LIFETIME WARRANTY

SA Consumer Products, Inc. will repair or replace, at their sole discretion, any Remington gun sate damaged by fire, forced entry, forced attack or natural tlood for the lifetime of the original owner.
SA Consumer Products, Inc. will repair or replace, at their sole discretion, any Remington gun sate with detective parts, paint or lock for the lifetime of the original owner.
It SA Consumer Products, Inc. deems a replacement safe is to be sent, they will pay the freight costs to ship the replacement sate to the original owner.
This lifetime warranty is limited to the sate and expressly excludes any loss associated with the contents of the safe.
SA Consumer Products, Inc. reserves the right to receive full evidence of your misfortune, such as a police report and/or homeowners statement of coverage.
This warranty is not valid outside of the United States and Canada.
Proof of registration and copy of sales receipt must be on Tile at the time of claim. Visit our website at remingtonsates.com to register your safe.
Lifetime warranty only applies to the original owner of the sate.
SA Consumer Products, Inc. shall only be responsible and liable when the sate is used in compliance with the directions specified in your new Remington gun sate owner’s manual.
Failing to secure your sate properly to the floor per instructions in the Users Manual will void the Warranty of the Safe.
SA Consumer Products, Inc. requires that specific guidelines be followed for repair. The safe will be repaired in-home if possible (to include parts and labor) however, if factory replacement is necessary (SA Consumer Products, Inc.’s sole discretion), the replacement will be shipped freight prepaid, curbside delivery.
This warranty is inclusive and is in lieu of any and all other warranties, express or implied. Specifically excluded are the warranties of merchantability and fitness for a particular purpose. This warranty is limited to the safe itself and/or its value and does not include consequential damages ot any kind including, but not limited to, the contents in and of the safe.

remingtonsafes.com