RODE 2AEAN Wireless PRO User Guide
- June 16, 2024
- Rode
Table of Contents
RODE 2AEAN Wireless PRO
Product Information
- Specifications:
- Frequency Range: 2.402 – 2.480 GHz
- Maximum Output Power: < 10dBm
- Important Safety Information
- NORTH AMERICA
- This transmitter must not be co-located or operated in conjunction with any other antenna or transmitter. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
- This device may not cause harmful interference.
- This device must accept any interference received, including interference that may cause undesired operation.
- To avoid interference, please follow these guidelines:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and the receiver.
- Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
- This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment.
- Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
- This device contains license-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada’s license-exempt RSS(s).
- Operation is subject to the following two conditions:
- This device may not cause interference.
- This device must accept any interference, including interference that may cause undesired operation of the device.
- EU Compliance Statement http://www.rode.com/wireless-pro.
Product Usage Instructions
- To use the Wireless PRO, please follow these steps:
- Connect the transmitter (TX1 or TX2) to the audio source using the appropriate cables.
- Ensure the receiver (RX) is connected to the audio recording device or amplifier.
- Power on the transmitter and receiver.
- Use the frequency range selector to choose a suitable frequency for transmission.
- Adjust the output volume on both the transmitter and receiver to the desired level.
- Monitor the audio signal to ensure proper transmission and reception.
- If interference occurs, try reorienting or relocating the receiving antenna, increasing the separation between equipment and receiver, or consulting a professional for assistance.
FAQs
- Q: What is the frequency range of the Wireless PRO?
- A: The frequency range of the Wireless PRO is 2.402 – 2.480 GHz.
- Q: How should I dispose of the Wireless PRO at the end of its service life?
- A: The crossed-out bin symbol on the product and/or packaging indicates that the Wireless PRO should not be discarded with general domestic waste. Please follow the legal regulations on electrical waste segregation and disposal applicable in your country.
- Q: Where can I find more information about the Wireless PRO?
- A: For more information about the Wireless PRO, you can visit our website at rode.com or scan the provided QR code for additional information.
Overview
Installation nstruction
Cable available separately kabel separat erhältlich
IMPORTANT SAFETY INFORMATION
- Read and understand the instructions and safety guide completely before using the product.
- Ensure both the instruction manual and safety guide are accessible to all users, including when passing the product on to third parties.
- Only use this product with authorized RØDE accessories.
- Do not open the product housing. This will void the warranty.
- Refer all service and repairs to RØDE-approved service personnel. Service or repair is required for products that have been damaged, exposed to liquid, rain, or moisture, or do not operate normally.
- Use the product only in the ways described in the instructions.
- Do not use the product if it was damaged during transportation.
- Keep the product away from liquids and electrically conductive objects that are not necessary for operation.
- Do not use any solvents or corrosive cleaning agents to clean the product.
- Do not adjust the controls of the product in an environment that requires your attention (operating machinery, driving, etc.).
- This product contains a battery that is only replaceable by a skilled person.
NORTH AMERICA
This transmitter must not be co-located or operated in conjunction with any other antenna or transmitter. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
- This device may not cause harmful interference, and
- This device must accept any interference received, including interference that may cause undesired operation.
This equipment has been tested and found to comply with the limits for a Class B digital device, according to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used following the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and the receiver.
- Connect the equipment to an outlet on a circuit different from that to which the receiver is connected
- Consult the dealer or an experienced radio/TV technician for help.
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This device contains license-exempt transmitter(s)/receiver(s) that comply with Innovation, Science, and Economic Development Canada’s license-exempt RSS(s).
Operation is subject to the following two conditions:
- This device may not cause interference.
- This device must accept any interference, including interference that may cause undesired operation of the device.
EU Compliance Statement
Hereby, RØDE Microphones declares that the radio equipment type Wireless PRO complies with Directive 2014/53/EU.
The full text of the EU declaration of conformity is available at the following internet address:
- http://www.rode.com/wireless-pro.
- Frequency Range: 2.402 – 2.480 GHz
- Maximum Output Power: < 10dBm
- For details on EU representatives go to http://en.rode.com/distributors.
Note of Disposal
- WEEE Directive (2012/19/EU)
The crossed-out bin symbol on a product and/or packing indicates that this product should not be discarded with general domestic waste, but must be collected separately at the end of its service life. Please observe the legal regulations on electrical waste segregation and disposal applicable in your country.
- RØDE Microphones, 107 Carnarvon St, Silverwater NSW 2128, Australia
- Authorized UK Representative: RØDE UK, Unit A, 23-25 Sunbeam Rd, London NW10 6JP, United Kingdom
- Authorised EU Representative: RØDE EU, Neukirchner Str. 18, 65510 Hünstetten, Germany
LOVE YOUR WIRELESS PRO? SHARE WITH US
- @rodemic
- @rodemics
- @rodemic
- @rode
- rode.com.
References
- Where To Buy | RØDE Microphones
- RØDE Microphones | Premium Microphones & Audio Equipment
- Wireless ME | Compact Wireless Microphone System | RØDE