Recozy 1412 Lupo Wall Wall Lamp User Manual
- June 17, 2024
- Recozy
Table of Contents
Recozy 1412 Lupo Wall Wall Lamp
Explanation of Symbols Data sheet
| Read instructions!
---|---
| This luminaire is for indoor use only, in
dry and enclosed areas.
| Protection class II
| Observe warning and safety instructions!
| Risk of injury or death for infants and
children!
| Warning! Risk of electric shock!
| Use eco-friendly disposal techniques for
the device and package!
| Declaration of Conformity – Products
marked with this symbol comply with all applicable legislation of the European
Economic Area.
Introduction
Congratulations, and thank you for purchasing your new Recopy luminaire. The instruction manual is included with this product and contains important information regarding safety, usage, and disposal. Please take the time to familiarise yourself with all operating and safety instructions before using the product. Only use the product as described and for its intended purposes. When passing the product on to others, please provide all relevant documents. Before using the product, ensure the correct voltage and all parts are assembled correctly.
Intended Usage:
This luminaire is suitable for indoor use
only in dry and enclosed rooms. This device is intended for use in private
households only and is unsuitable for commercial or industrial use. Please
note that this product is designed for regular operation and should not be
used in any way that exceeds its intended purpose or specifications.
Scope of Delivery:
Upon receiving your package, immediately check the contents to ensure all components are included and in proper condition. The following components are included in this package:
- 1 table lamp
- 1 LED light bulb (already installed)
- 1 Instruction manual
Data sheet
Lupe Wall
Wall lamp
Item number : 1412
Technical data
Light bulb: LED E14
Lamp socket: E14
Protection class: IP 20
Light colour: 2200-2700 K
Luminous flux: 470 elm
Input: (max.) 6W
Voltage: 230 V
Burning period: about 25.000 hours
Product features:
Dimensions:
Height 17,5 cm, Ø 12 cm
We recommend using an illuminant of a maximum of 6 W.
Textile cable
Length:
1,5 m
Diameter:
ø 6 mm
Dimming:
Gradual dimming (100 %, 55 %, 15 %)
Description
- Light bulb
- Textile cable
- Diffusor / Lampshade
- Wall bracket
- Tool for diffusor removal
Safety
Safety instructions
In case of damages caused by disregarding
this operating manual, the warranty claim will be void. No liability is
accepted for consequential damages.
No liability is accepted for property damage or personal injury caused by
improper handling or failure to observe the safety instructions.
Risk of injury or death for infants and
children! Never leave children unsupervised with packaging material. There
is a risk of suffocation caused by packaging material. Children often
underestimate the dangers. Children aged 8 and above can use this device, and
people with reduced physical, sensory or mental capabilities or lack of
experience and knowledge if they are supervised or instructed in the safe use
of the device and understand the resulting dangers.
Children are not allowed to play with the device. Children must only carry out
cleaning and user maintenance with supervision.
Risk of injury! Do not leave the lamp or packaging carelessly lying around. Plastic films, plastic parts, etc., could become dangerous toys for children. Avoid the risk of electric shock. If the lamp is exposed to solid disturbances, it may result in impairments from which it will recover independently. Before connecting the luminaire to the power supply, check the power plug for any damage. Never use the luminaire if you notice any damage.
Contact the service address or an electrician in case of damage, repairs or other problems with the lamp
Avoid contact of the luminaire with water or
other liquids. Never open any electrical components (such as switch, socket,
etc.) or insert any objects into them. Such interferences pose a risk of
electric shock.
Only hold the insulated area of the power plug when connecting or disconnecting from the power source! To prevent hazards, any damaged outer flexible cable of this lamp must be replaced exclusively by the manufacturer, its service representative or a comparable specialist.
Before use, ensure that the existing power voltage matches the required
operating voltage of the luminaire (see „Technical Data“).
Always disconnect the power plug before installing, disassembling, cleaning,
or if you‘re not going to use the luminaire for a while. Do not install the
luminaire on damp or conductive surfaces.
Use bulbs only in a dry environment. This luminaire is not suitable for external dimmers and electronic switches. The correct way to behave is: Place the luminaire to protect it from moisture and dirt. Always be attentive!
Warning: Do not cover the luminaire with objects. Excessive heat can cause a fire.
During operation, do not look into the light source from a close distance. Avoid using optical devices to peer directly into the light source.
Remove the plug from the power plug to disconnect the lamp from the power supply. Use only light bulbs as described in the „Technical Data“ chapter.
Installation
Caution:
- Read all instructions and warnings carefully before using this product.
- Inspect the device for visible damage before usage.
- Do not place the wall lamp in an environment with high temperatures.
- Keep the wall lamp away from open flames or scorching environments.
- Do not expose the wall lamp to moisture, and never submerge it in liquid.
- Ensure that the wall lamp is always dry.
- Do not disassemble this wall lamp, and do not attempt to repair or modify it in any way.
Luminaire installation:
Note: Remove all packaging material from the product.
- Drill 2 holes, insert the plugs, and screw the wall bracket tightly.
- Insert the lamp with the cable hole facing down and to the left onto the wall bracket.
- Turn the lamp to the right at the base to secure it to the wall.
- Connect the power plug to a properly installed power outlet. Your luminaire is now ready for operation.
Your luminaire is now ready for operation.
Switching luminaire on / off:
- Switch on or off the luminaire with the toggle switch.
- If you want to dim the light, use the 3-step dimming function by switching the luminaire on and off with the toggle switch. This will gradually dim the light bulb.
Light Replacement
Switch off the luminaire.
Warning: Risk of electric shock! Disconnect the power plug from the power
outlet first.
Caution! Risk of burns from hot surfaces! Allow the luminaire to cool
entirely before changing the light bulb. Use a clean, lint-free and dry cloth
when changing the light bulb.
Remove the diffuser using the diffuser removal tool.
Unscrew the light bulb counterclockwise from the lamp socket.
Screw a new light bulb clockwise into the lamp socket.
Now, insert the diffuser back into the wall lamp. Connect the power plug to a
properly installed power outlet.
Your luminaire is now ready for operation
Maintenance and Cleaning
Switch off the luminaire. Warning: Risk of electric shock! Disconnect the power plug from the power outlet first. Caution! Risk of burns from hot surfaces! Allow the luminaire to cool completely. Warning: Risk of electric shock! You should never clean the lamp with water or other liquids for electrical safety reasons, nor should it be submerged in water. Do not use solvents, gasoline or similar substances. The lamp could be damaged. Use only a clean, lint-free and dry cloth for cleaning. Connect the power plug to a properly installed power outlet.
Disposal
With this logo, we would like to show that
we are a customer of the „Green Dot“ system and want to comply with our
obligations for system participation according to the Packaging Act. The
packaging is made of environmentally friendly materials to be disposed of at
local recycling centres.
Please pay attention to the labelling of
the packaging materials when separating waste. They are labelled with
abbreviations (a) and numbers (b) with the following meanings: 1-7: Plastics /
20-22: Paper and cardboard / 80-98: Composite materials.
In the interest of environmental
protection, please do not dispose of your product in household waste when it
is no longer needed. Instead, dispose of it properly or return it to us using
the Recozy Exchange Program. The product will be recycled and reintegrated
into our production cycle. For more information, visit
www.recozy.de.
Warranty and Service
The warranty period is 24 months from the date of purchase. This includes a 6-month guarantee from the date of purchase. The geographical scope of the warranty protection is Europe-wide. The invoice serves as proof of purchase. The product has been thoroughly tested for quality and functionality before shipping.
The warranty will be voided in the following cases:
- If the installation is faulty.
- If the system is modified without our approval.
- If the damages are caused by moisture, drops or damaged cables.
- If no proof of purchase is available.
WEEE-Reg.-Nr. DE 88159560
Customer Support
Service address:
Sustainable Manufacturing GmbH
Industriepark 7
27777 Ganderkesee
Germany
Tel.: 0049 4222 7989902
E-Mail: info@recozy.de
www.recozy.de
Manufacturer:
Sustainable Manufacturing GmbH
Industriepark 7
27777 Ganderkesee
Germany
Tel.: 0049 4222 7989902
E-Mail: info@recozy.de
www.recozy.de
This product meets the requirements of the applicable European and national
regulations. Conformity has been demonstrated. Corresponding declarations and
documents are kept on file by the manufacturer.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>