CANOPIA AUSTIN 6×8 Grill Gazebo Kit Instruction Manual

: June 12, 2024
: CANOPIA

Table of Contents

CANOPIA AUSTIN 6×8 Grill Gazebo Kit
Product Information
Product Usage Instructions
TOOLS & EQUIPMENT
SITE PREPARATION & FOUNDATION
DIMENSIONS
SAFETY ADVICE
CARE & MAINTENANCE
BEFORE ASSEMBLY
DURING ASSEMBLY
Contents
Installation
QR SCAN
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

CANOPIA AUSTIN 6×8 Grill Gazebo Kit

CANOPIA-AUSTIN-6x8-Grill-Gazebo-Kit-prodcut

Product Information

The product is the AUSTINTM 6×8 / 1.8×2.4, manufactured by Palram Canopia Ltd. It is a light transmitting self-supporting Twin-wall PC roofing structure with an aluminum and galvanized steel upstand. The product is designed for open multi-purpose coverings where the ground slope is less than 5%. It is intended to provide resistance to upward and downward loads, as well as fire resistance. The product also offers impact resistance and radiation transmittance properties.

Product Usage Instructions

Before starting assembly, carefully read the instructions provided in the user manual.
Keep the user manual in a safe place for future reference.
Visit the website www.canopia.com for support and assistance.
If you have any concerns or questions, contact the customer service team using the provided contact details.
If you need further assistance or cannot find the information you are looking for, refer to the next page for local customer care options.
For general questions, visit canopia.com/contact-us or contact +972-4-848-6816 or customer.service@palram.com.
If you are in the USA, contact 877-627-8476 or generalsupport@poly-tex.com.
If you are in Canada, contact 905-5646007 or sales@footprintproducts.com.
If you are in Germany, contact 0180-522-8778 or customer.serviceDE@palram.com.
If you are in Israel, contact 04-848-6800 or customer.service@palram.com.
If you are in Australia, contact 03-9219-4444 or salesvic@palram.com. For greenhouses in Australia, contact 03-9544-6-999 or info@mazedistribution.com.au.
If you are in the Czech Republic, contact 0493-523-523 or servis@garland.cz.
If you are in Switzerland, contact 062-287-33-77 or info@ritter.ch.
If you are in Cyprus, contact 0224-971-13 or alpaco@alpacodomica.com. Visit www.alpacodomica.com for more information.
If you are in Finland, contact 09-6866720 for Neuvonta or 050-3715350 for Tuki / Varaosat. Visit www.horisontenterprises.fi or email tuki@horisontenterprises.fi for support.
If you are in Poland, contact the Infolinia at 801-011-929 or 22-349-93-36. Email kontakt@ogrodosfera.pl for further assistance.
The product’s manufacturer is Palram Canopia Ltd., located at Teradion Industrial Park, M.P Misgav 2017400, P.O.B 53, Israel. Contact them at Tel +972.4.848.6900 or Fax +972.4.848.6901. Email canopia@palram.com and visit www.canopia.com for more information.
The product has been assessed and verified for constancy of performance under System 3.
The declared performance of the product includes resistance to upward load (UL 720), resistance to downward loads (DL 1000), reaction to fire (B, s1, d0), water tightness, impact resistance (for small hard body), radiation transmittance, air permeability (for sheet material), and durability (of the sheet material).
Follow the mounting and fixing provisions mentioned in EN 16153:2013.

IMPORTANT: Please read these instructions carefully before starting assembly. Keep these instructions in a safe place for future reference.

TOOLS & EQUIPMENT

CANOPIA-AUSTIN-6x8-Grill-Gazebo-Kit-fig-1

SITE PREPARATION & FOUNDATION

PREPARE THE SITE
The product must be positioned and fixed on a flat level surface.

Clear the site
Level the ground

CHOOSE YOUR FOUNDATION TYPE

Option
Concrete / Wooden surface

The screws and masonry anchors supplied with the kit are suitable for concrete fixing only.
Please consult with an expert regarding which fasteners are suitable for other surfaces types (not supplied).

CHOOSE YOUR FOUNDATION TYPE

Dig holes into the ground and fill with concrete.
For frozen areas, please check the required depth needed for these holes

Option 2: Pavina stones

Option 3 Solid ground / Asphalt

DIMENSIONS

The Illustration describes center-to-center distance between poles.

SAFETY ADVICE

It is of utmost importance to assemble all of the parts according to the directions. Do not skip any steps.
Always work gloves during panel sliding,
Always wear shoes and safety goggles when working with extruded aluminium,
If using a step ladder or power tools make sure that you follow the manufacturer’s safety advice.
Do not touch overhead power cables with the aluminium profiles.
Do not attempt to assemble the product in windy or wet conditions.
Do not climb or stand on the roof.
Dispose of all plastic bags. Keep them out of reach of small children.
Keep children away from the assembly area.
Do not lean against or push the products during construction.
Do not position your product in an area exposed to excessive winds.
Do not attempt to assemble this product if you are tired, have taken drugs or alcohol or if you are prone to dizzy spells.
Hat items such as recently used grills, blowtorches etc must not be stored in the product.
Make sure there are no hidden pipes or cables in the ground before anchoring to foundation.
This product is designed to be used mainly as a garden gazebo.
Make sure to anchor the product directly to a solid foundation to increase the product’s stability and wind resistance in areas
with severe weather conditions. Make sure that there are no obstructions between the assembly area and the final position of the product.

CARE & MAINTENANCE

When your product needs to be cleaned, use a mild detergent sclution and rinse with cold clean water.

DO WoT use acetone, abrasive cleaners or ather specal detergents to clean the panels
Clean the product once assembly is complete.

BEFORE ASSEMBLY

Selecting a site:

Choose your site carefully before beginning assembly.
Choose a sunny position away from overhanging trees.
The product must be positioned and fixed • a flat el surface
The product must be secured directly to a solid foundation.
This multi-part assembly best achieved by two people. Allow at least half a day for the assembly
Take ail components & parts out of the packages. Sort the parts and check against the content parts list.
Parts should be laid out dose at hand. Keep a small parts (screws etc) in a bowl so they do not get lost.
Please note multi-sided profiles are used in this product. As a result some holes in the profiles are not used during assembly.
Please review entire instructions before starting Carry out the assembly steps in exact order.
Please consult your local authorities if any permits are required priort constructing the product.
Please ensure you have sufficient side space for inserting the roof panels during the assembly process.

IMPORTANT

Firmly connect the product to a level surface immediately after completion of the assembly.
Anchoring this product to the ground is essential to its stability and rigidity. It is required to complete this stage in order for your warranty to be valid.
During assembly use a soft surface below the parts to avoid scratches and damages.
We recommend checking for restrictions or covenants for building this product in your area. n addition we advise check if you need to submit any forms or if any permit is required prior to building the product.

DURING ASSEMBLY

During assembly, you will encounter different icons for different products.
Please see below for more information:

CANOPIA-AUSTIN-6x8-Grill-Gazebo-Kit-fig-8

You may use silicone lubricant spray on the frame in order to help you slide the panels into the profiles. Do not spray the panels.
Use a rubber mallet if necessary.
Make sure you remove covering plastic film from both sides of the panel.
All panels with the stamped words “THIS SIDE OUT” must be facing out to create full UV protection. Remove plastic sticker as panels are locked in place.
This icon indicates that the installer should be inside the product.
This icon indicates that the installer should be outside the product.
Steps marked with dashed outlines refer to Extensions only.
Some of the steps are irrelevant for an assembly of a single product.
When assembling a single or an extended product, some parts may be surplus.
These 2 icons below indicate if screw’s tightening is required or not.
Temporary tightening of a few screws may be needed to prevent a profile from sliding out.
Tighten all screws once assembly is completed.

IMPORTANT ASSEMBLY STEPS

When encountering this information icon during assembly, please refer the relevant assembly step for important additional comments.
During assembly use a soft surface below the parts to avoid scratches and damages.
Make sure that the edge of the profiles and panels are aligned.
The recommended height postion of the shelf can be adjusted from 90-110 cm / 35″-43″.
The height and location of the bottle opener is a recommendation.
Install as you choose.

Installation

CANOPIA-AUSTIN-6x8-Grill-Gazebo-Kit-fig-12

Declaration of Performance

According to Construction Products Council Directive UE N°305/2011 and EN 14963:2006 Issue Date 20/10/2022

Identification code: Austin™, refer to CE label no 075
Type: A light transmitting self-supporting Twin-wall PC roofing structure with upstand made of aluminum and galvanized steel elements
Intended use: o pen multi-purpose covering where the ground slope is less then 5%
Manufacturer: Palram Canopia Ltd. Teradion Industrial Park, M.P Misgav 2017400, P.O.B. 53, Israel
Importer and EU representative : PALRAM Applications UK, Unit 40 J3 Industrial Estate Carr Hill, Doncaster DN4 8DE
Assessment and verification of constancy of performance: System 3
Declared performance:
Resistance to upward load: UL 720
Resistance to downward loads: DL 1000
Reaction to fire: B, s1, d0
For mounting and fixing provisions see EN 16153:2013
Resistance to fire: NPD
External fire performance: FROOF
Water tightness:
For the rooflight with upstand: Pass
For the sheet material: Pass
Impact resistance:
For the small hard body: Pass
For the large soft body: NPD
Thermal transmittance:
For the rooflight: NPD (not relevant to an open multi purpose cover)
For the sheet material: 3.5 W/(m²•K)
Direct airborne sound insulation: NPD (not relevant to an open multi purpose cover)
Radiation transmittance:
Light transmittance: Tv – 0.2%
Solar direct transmittance: Te – 3.13%
Solar factor: g value – 0.26
Air permeability:
For the rooflight: NPD (not relevant to an open multi purpose cover)
For the sheet material: Pass
Durability (of the sheet material): ΔA, Cu 1, Ku 1
The performance of the product identified in points 1 and 2 is in conformity with the declared performance in point 7.
This declaration of performance is issued, in accordance with Annex ZA.2.2 – EN 14963:2006, under the sole responsibility of Palram Canopia Ltd.
ITT reports and Factory Production Control records are available upon request at www.canopia.com