Force 1 Scoot 2 Hands Free Drone User Manual
- June 5, 2024
- Force 1
Table of Contents
- IMPORTANT STATEMENT
- SAFETY PRECAUTIONS
- IMPORTANT SAFETY NOTICE FOR DRONE CARE
- GUIDELINES FOR LI-PO BATTERY-POWERED DEVICES
- DRONE CHARGING SAFETY GUIDELINES
- DRONE CALIBRATION INSTRUCTIONS
- DRONE CHARGING INSTRUCTIONS
- BOX CONTENTS
- DRONE OVERVIEW
- SCOOT OPERATION INSTRUCTIONS
- FLIGHT DIRECTION CONTROLS
- TROUBLESHOOTING GUIDE
- WARRANTY
- Documents / Resources
Scoot 2 Hands Free Drone
User Manual
FLY ME NOW.
l’LL SHOW YOU HOWi
FOR MORE INFORMATION
Visit us online at force1rc.com for product information, replacement parts,
and flight tutorials.
IMPORTANT STATEMENT
Thank you for buying a Force1 drone. Please read this manual carefully
before operating the drone.
Your purchase implies you have read this manual and agree to follow all
guidelines and instructions herein.
- Please operate in a safe manner. We undertake no liability for human injury or property damage caused by improper operation, as we have no control over the setup, use, and operation of this drone.
- This drone is suitable for experienced RC drone users aged 14 years or above. Not safe for users under the age of 14 to use.
- The flying field must be legally approved by your local government. If you have any questions about use, operation, technical support, repair, after-sale service, etc.
Force1 does not assume any responsibility for any accidents caused by using non-genuine parts and ac accessories. Keep the packaging and user manual for future reference.
Email us at support@forcerc.com for questions, comments or to request spare parts.
SAFETY PRECAUTIONS
This drone is suitable for experienced drone users aged 14 years or above. This product contains small parts; please keep out of reach of small children.
Please pay special attention to the following safety procedures:
-
Keep away from the humid environment
The drone is made of precise electronic components. Humidity or water vapor may damage electron ic components causing accidents. -
Keep away from rotating parts
Rotating parts can cause serious injury and damage. Keep face and body away from rotating motors. -
Keep away from heat
The drone is made of metal, fiber, plastic, electronic components, etc. Keep away from heat and direct sunshine to avoid distortion and damage. -
Stay aware while operating this drone
Avoid areas with sudden changes in elevation, uneven ground, or dangerous obstacles.
IMPORTANT SAFETY NOTICE FOR DRONE CARE
- Heat is a known factor in battery fires; if a battery is pushed beyond 60C/140F during use or charging, problems could occur due to metallic lithium generation that can damage the cell
- Store upright and do not rest objects against the drone
- Do not use if the drone is punctured or damaged
- Do not expose the drone to water
- Do not leave the drone in direct sunlight
- Please use caution when in the presence of children or animals
This drone contains a rechargeable internal lithium polymer (Li-Po) battery. Please do not attempt to remove, disassemble, replace or repair the battery after the expiration of the battery. Please contact customer support if you observe swelling in the engine assembly.
GUIDELINES FOR LI-PO BATTERY-POWERED DEVICES
- Never overcharge a Li-Po battery
- Do not charge Li-Po batteries near flammable materials or liquids
- Keep Li-Po batteries away from children and animals
- Never use or charge a Li-Po battery that has ballooned or swelled
- Never use or charge a Li-Po battery that has been punctured or damaged
- Heat is a known factor in battery fires; if a battery is pushed beyond 60C/140F during discharging or charging, problems could occur due to metallic lithium generation, which damages the cell
WARNING:
DO NOT LEAVE THE BATTERY
CHARGING UNSUPERVISED
DRONE CHARGING SAFETY GUIDELINES
- Do not leave the drone unsupervised when charging
- Make sure there is no short circuit of the power wire
- Please use the recommended charger only. Do not charge on a gaming console. Only use your computer’s USB port, power bank, or phone wall charger to charge the battery
- To avoid trickle charging, always unplug the drone from the USB charger when storing or leaving unattended
- Check the charger’s wire, plug, and surface regularly. Do not use a broken charger
- When the drone is fully charged, do not try to charge further until it has been partially or fully discharged
- Leave time between charging and using the drone
- Do NOT overcharge the drone. It may cause overheating and in tum, this overheating could damage the battery or melt/bum internal surfaces when charging
- Never try charging the drone if you feel the battery has been damaged, you run the risk of fire
- Cells that are obviously swollen or have physical damage should never be used, and careful disposal is required, especially if the cells are swollen; check the engine assembly of the drone for swelling
Email us atsupport@force1rc.com for questions, comments or to request spare parts.
DRONE CALIBRATION INSTRUCTIONS
Follow these steps to calibrate your drone
- Tum the power switch on
- Tum Scoot upside down (Figure 1)
- Quickly press the power button 3 times. The LED Light Ring will blink quickly
- Place Scoot upright on a horizontal surface (Figure 2) and wait for LED Light Ring to turn solid
DRONE CHARGING INSTRUCTIONS
- Connect the drone to a USB port with a USB charger cable and choose a charging method pictured below
- The USB charger light will tum off when charging and red when fully charged
WARNING:
DO NOT LEAVE BATTERY CHARGING UNSUPERVISED
BOX CONTENTS
DRONE OVERVIEW
SCOOT OPERATION INSTRUCTIONS
HOW DOES SCOOT FLY?
WHAT’S SCOOT DOING NOW?
FLIGHT DIRECTION CONTROLS
HOW IS SCOOT CONTROLLED?
CAN SCOOT GO HIGHER?
HOW DOES SCOOT STOP?
WHAT ELSE TO KNOW ABOUT SCOOT?
HOW TO MAKE SCOOT 2 FLIP.
TROUBLESHOOTING GUIDE
PROBLEM | SOLUTION |
---|---|
How does Scoot turn on? | “My ON/OFF switch is on the opposite side of my |
charger port. See the diagram on Page 7.”
Why doesn’t Scoot charge?| “My USB plug will turn red when it’s plugged into a
power source; the light will turn off while I’m charging. When I’m fully
charged, the USB plug will turn red again.”
Why does Scoot crash?| “I don’t mean to! If you make sure you’re in a spacious
room, I can easily change direction when I sense an obstacle. If the space is
too small, I might try to change directions too quickly.”
What if Scoot goes too fast?| “I always try to avoid any obstacles: walls,
furniture, people, solid objects. Sometimes, I like to zoom! Make sure the
room we’re in has a good amount of airspace for my flight path.”
How durable is Scoot?| “I’m pretty tough, but please be gentle! A little toss
is all it takes to launch me. “Catch” me out of the air quickly and turn me
upside down to stop me. Always make sure you’re in a safe, clear flight area
before relaunching me.”
Where can Scoot fly?| “I like to explore, but I can get pretty adventurous!
I’m at my best indoors, with plenty of space.”
Can Scoot’s performance be improved?| “If you need to adjust my flight
control, check out the calibration section on Page 5.”
LEARN MORE ABOUT SCOOTI
WARRANTY
LIMITED 90-DAY WARRANTY AND FREE LIMITED REPLACEMENT PARTS FOR 90 DAYS
Force1 re.com warrants to the original buyer only that its products will be free from defects in material and workmanship for ninety (90) days from the date upon which the product is shipped, either directly from Force1rc.com or from an Authorized Reseller’s location, to the buyer.
The following conditions must be met to be eligible for warranty coverage:
- During the warranty, the period product is used as intended by the manufacturer.
- The Product has not been disassembled or modified.
- The labels and serial numbers show no signs of tampering or altering.
- Buyer has a warranty code obtained by registering their product online prior to making a claim.
EXCEPTIONS: THE LIMITED WARRANTY SHALL NOT APPLY TO:
- Damage caused by normal wear and tear
- Accident, negligence, abuse, misuse, misapplication, or willful damage by buyer (or its agents), or acts of nature
- Crash or burning caused by non-manufacturing factors
- Damage caused by unauthorized modification or disassembly not authorized by the instruction manual
- Damage caused by incorrect use or operation
- Damage caused by a mismatch or misuse of battery or charger
- Failure of the operator to follow the operating instruction or use outside the product’s operating parameters
- Damage caused by operating the product in poor weather (i.e., strong wind, rain, low visibility, etc.)
- Damage caused by operating the product in or around electromagnetic interference (i.e., radio trans missing tower, high-voltage wire, substation, etc.)
- Damage caused by operating the product where there may be interference caused by other wireless devices
- Operating the product with a load capacity in excess of the safe weight listed in the manual
- Operating the product with aged, damaged, or unauthenticated third-party components
- Operating the product with a defective battery
PROCEDURE: Any claims for breach of the foregoing limited warranty shall only be valid if the buyer makes such claim in writing within ninety (90) days of the date of shipment of the product to which the claim relates. To make a warranty daim, please email warranty@force1rc.com with your full name, address, phone number, order number, drone type, pan type, and purchase date and product issue.
LIMITED REMEDY: Force1rc.com’s sole liability, and buyer’s sole remedy, for any breach of the foregoing warranty, shall be at Force1rc.com’s option, to (iii) exchange the product with a new product or a refurbished product that is functionally equivalent to the original product, or (ii) issue a credit or refund for the purchase price of the product. Any replaced products shall be warranted as set forth herein, provided that the period within which the buyer may make further claims shall be limited to the remainder of the original period for the applicable product or 90 days, whichever is longer (although the warranty period shall be suspenclecl during any period of replacement).
DISCLAIMER: THE WARRANTY AND REMEDIES ARE EXCLUSIVE AND IN LIEU OF ALL
OTHER WARRANTIES AND FORCE1RC.COM DISCLAIMS ALL OTHER WARRANTIES, EXPRESS OR
IMPLIED, INCLUDING WITHOUT LIMITATION THE IMPLIED WARRANTIES OF
MERCHANTABILITY AND
FITNESS FOR A PARTICULAR PURPOSE, NON-INFRINGEMENT, AND ANY WARRANTIES ARISING
OUT OF COURSE OF DEALING, COURSE OF PERFORMANCE, AND TRADE USAGE. FORCE1RC.
COM IS NOT RESPONSIBLE FOR DIRECT, SPECIAL, INCIDENTAL, OR CONSEQUENTIAL
DAMAGES RESULTING FROM ANY BREACH OF WARRANTY OR CONDITION, OR UNDER ANY
OTHER LEGAL THEORY, INCLUDING BUT NOT LIMITED TO LOSS OF USE; LOSS OF REVENUE;
LOSS OF ACTUAL OR ANTICIPATED PROFITS (INCLUDING LOSS OF PROFITS ON
CONTRACTS); LOSS OF THE USE OF MONEY; LOSS OF ANTICIPATED SAVINGS; LOSS OF
BUSINESS; LOSS OF OPPORTUNITY; LOSS OF GOODWILL; LOSS OF REPUTATION; LOSS OF,
DAMAGE TO, COMPROMISE, OR CORRUPTION OF DATA; OR ANY INDIRECT OR
CONSEQUENTIAL LOSS OR DAMAGE HOWSOEVER CAUSED INCLUDING THE REPLACEMENT OF
EQUIPMENT AND PROPERTY, ANY COSTS OF RECOVERING OR REPRODUCING ANY DATA
STORED IN OR USED WITH THE PRODUCT OR ANY FAILURE TO
MAINTAIN THE CONFIDENTIALITY OF INFORMATION STORED IN THE PRODUCT.
Some states do not allow the exclusion or limitation of incidental or consequential damages, so the above limitation or exclusion may not apply to you. In addition, some states do not allow limitations on how long an implied warranty lasts, so the above limitation may not apply to you.
FREE REPLACEMENT PARTS FOR 90 DAYS: Force1.com shall also make available any spare part needed for registered drones free of charge for 90 days from the date of purchase, with the exception of batteries, motors, circuit boards, cameras, and transmitters. Shipping charges may apply. Limit one part type request per registered drone (e.g., registrants are entitled to one extra set of propellers per registered drone). To request spare parts, please email warranty@force1re.com with your warranty code, drone name/model, current shipping address, purchase date, and part type.
GET YOUR WARRANTY CODE ATforce1rc.com/pages/warranty-signup HAVE YOUR ORDER NUMBER AND/OR DRONE UPC READY
FCC INFORMATION
This equipment has been tested and found to comply with the limits for a Class
B digital device,
pursuant to part 15 of the FCC Rules. These limits are designed to provide
residential protection against harmful interference in a residential
installation. This equipment generates, uses, and can radiate radio frequency
energy and, if not installed and used in accordance with the instructions, may
cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If
this equipment does cause harmful interference to radio or television
reception. This can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one or more of the
following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on the circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced technician for help.
FCC WARNING
The equipment may generate or use radiofrequency energy. Changes or
modifications to this equipment may cause harmful interference unless the
modifications are expressly approved in the instruction manual. Modifications
not authorized by the manufacturer may void the user’s authority to operate
this device.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
- This device may not cause harmful interference, and
- This device must accept any interference received, including interference that may cause undesired operation.
To ensure that play is both safe and fun, please review these operating
instructions:
Failure to follow all safety instructions may result in injury or property
damage none of which Force 1 will be held liable for as proper warnings are
outlined in the manual.
- Upon use of this product, the end-user assumes all responsibility, and Force1 cannot be held liable for any personal injury and/or property damage.
- This item contains fast-moving parts, motors, and/or another wiring. When using it, basic precautions should always be followed including but not limited to the following:
- Keep your eye on the product at all times
- Tie back hair or wear a hat to avoid entanglement or injury
- Keep hands, hair, and loose clothing away from moving parts when the power switch is turned ON.
- Please ensure the product is turned off when not in
Documents / Resources
|
Force 1 Scoot 2 Hands Free
Drone
[pdf] User Manual
Scoot 2 Hands Free Drone, Hands Free Drone, Free Drone
---|---
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>