recozy 1411 Tete Table Lamp Instruction Manual
- June 17, 2024
- Recozy
Table of Contents
recozy 1411 Tete Table Lamp
Product Information
Specifications:
- Item: Tete Table lamp
- Item number: 1411
- Light bulb: LED E14
- Lamp socket: E14
- Protection class: IP 20
- Light color: 2200-2700 K
- Luminous flux: 470 lm
- Input: (max.) 6W
- Voltage: 230 V
- Burning period: about 25,000 hours
- Product features: Textile cable, Length: 1.5 m, Dimming: Gradual dimming (100%, 55%, 15%)
Product Usage Instructions
Safety:
Ensure to read and follow all safety instructions provided in the user manual
to prevent any risks of injury or damage.
Installation:
Place the lamp on a stable surface in a dry and enclosed area. Avoid damp or
conductive surfaces.
Luminaire Installation:
Connect the power plug to a compatible power source matching the required
voltage of the luminaire.
Switching Luminaire On and Off:
Use the toggle switch located on the power plug to turn the lamp on and off.
Light Replacement:
If the light bulb needs replacement, ensure the luminaire is disconnected from
the power source. Replace the light bulb with a compatible LED E14 bulb.
Maintenance and Cleaning:
Regularly clean the lampshade and base using a soft cloth. Avoid using liquid
cleaners directly on the lamp. Do not attempt to open any electrical
components for cleaning.
Disposal:
When disposing of the lamp, follow local regulations for electronic waste
disposal. Do not dispose of the lamp in regular household waste.
FAQ:
-
Q: Can I use this lamp outdoors?
A: No, this lamp is designed for indoor use only in dry and enclosed areas. -
Q: How do I dim the light?
A: The lamp supports gradual dimming at 100%, 55%, and 15% levels. Use the toggle switch to adjust the brightness.
Explanation of Symbols
Introduction
Congratulations, and thank you for purchasing your new Recozy luminaire. The instruction manual is included with this product and contains important information regarding safety, usage, and disposal. Please take the time to familiarise yourself with all operating and safety instructions before using the product. Only use the product as described and for its intended purposes. When passing the product on to others, please provide all relevant documents. Be fore using the product, ensure the correct voltage and all parts are assembled correctly.
Intended Usage:
This luminaire is suitable for indoor use only in dry and enclosed rooms. This
device is intended for use in private households only and is unsuitable for
commercial or industrial use. Please note that this product is designed for
regular operation and should not be used in any way that exceeds its intended
purpose or specifications.
Scope of Delivery
Upon receiving your package, immediately check the contents to ensure all components are included and in proper condition. The following components are included in this package:
- 1 table lamp
- 1 LED light bulb (already installed)
- 1 Instruction manual
Data sheet
Tete Table lamp:
Item number: 1411
Technical data
- Light bulb: LED E14
- Lamp socket: E14
- Protection class: IP 20
- Light colour: 2200-2700 K
- Luminous flux: 470 lm
- Input: (max.) 6W
- Voltage: 230 V
- Burning period: about 25.000 hours
Product features:
- Dimensions: Height 30 cm, Ø 20,4 cm
Textile cable
- Length: 1,5 m
- Diameter: ø 6 mm
Dimming:
- Gradual dimming (100 %, 55 %, 15 %)
Description
- Light bulb
- Toggle switch
- Power plug
- Lampshade
- Base
Safety
Safety instructions
In case of damages caused by disregarding this operating manual, the warranty
claim will be void. No liability is accepted for consequential damages. No
liability is accepted for property damage or personal injury caused by
improper handling or failure to observe the safety instructions.
Risk of injury or death for infants and children! Never leave children unsupervised with packaging material. There is a risk of suffocation caused by packaging material. Children often underestimate the dangers. Children aged 8 and above can use this device, and people with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they are supervised or instructed in the safe use of the device and understand the resulting dangers. Children are not allowed to play with the device. Children must only carry out cleaning and user maintenance with supervision.
Risk of injury! Do not leave the lamp or packaging carelessly lying around. Plastic films, plastic parts, etc., could become dangerous toys for children. Avoid the risk of electric shock. If the lamp is exposed to solid disturbances, it may result in impairments from which it will recover independently. Before connecting the luminaire to the power supply, check the power plug for any damage. Never use the luminaire if you notice any damage.
Contact the service address or an electrician in case of damage, repairs or other problems with the lamp.
Avoid contact of the luminaire with water or other liquids. Never open any
electrical components (such as switch, socket, etc.) or insert any objects
into them. Such interferences pose a risk of electric shock.
Only hold the insulated area of the power plug when connecting or
disconnecting from the power source! To prevent hazards, any damaged outer
flexible cable of this lamp must be replaced exclusively by the manufacturer,
its service representative or a comparable specialist.
Before use, ensure that the existing power voltage matches the required operating voltage of the luminaire (see „Technical Data“). Always disconnect the power plug before installing, disassembling, cleaning, or if you‘re not going to use the luminaire for a while. Do not install the luminaire on damp or conductive surfaces.
Use bulbs only in a dry environment. This luminaire is not suitable for
external dimmers and electronic switches. The correct way to behave is: Place
the luminaire to protect it from moisture and dirt. Always be attentive!
Warning: Do not cover the luminaire with objects. Excessive heat can
cause a fire.
During operation, do not look into the light source from a close distance. Avoid using optical devices to peer directly into the light source. Remove the plug from the power plug to disconnect the lamp from the power supply. Use only light bulbs as described in the „Technical Data“ chapter.
Installation
Caution
- Read all instructions and warnings carefully before using this product.
- Inspect the device for visible damage before usage.
- Do not place the table lamp in an environment with high temperatures.
- Keep the table lamp away from open flames or scorching environments.
- Do not expose the table lamp to moisture, and never submerge it in liquid.
- Ensure that the table lamp is always dry.
- Do not disassemble this table lamp, and do not attempt to repair or modify it in any way.
Luminaire installation:
- Note: Remove all packaging material from the product.
- Connect the power plug to a properly installed power outlet.
Your luminaire is now ready for operation.
Switching luminaire on/off:
- Switch on or off the luminaire with the toggle switch.
- If you want to dim the light, use the 3-step dimming function by switching the luminaire on and off with the toggle switch. This will gradually dim the light bulb.
Light Replacement
- Switch off the luminaire.
Warning: Risk of electric shock! Disconnect the power plug from the power outlet first.
Caution! Risk of burns from hot surfaces! Allow the luminaire to cool entirely before changing the light bulb. Use a clean, lint-free and dry cloth when changing the light bulb.
1. Unscrew the defective light bulb counterclockwise from the lamp socket.
2. Screw a new light bulb clockwise into the lamp socket. Connect the power plug to a properly installed power outlet. Your luminaire is now ready for operation.
Maintenance and Cleaning
Switch off the luminaire. Warning: Risk of electric shock! Disconnect the power plug from the power outlet first. Caution! Risk of burns from hot surfaces! Allow the luminaire to cool completely. Warning: Risk of electric shock! You should never clean the lamp with water or other liquids for electrical safety reasons, nor should it be submerged in water. Do not use solvents, gasoline or similar substances. The lamp could be damaged. Use only a clean, lint-free and dry cloth for cleaning. Connect the power plug to a properly installed power outlet.
Disposal
With this logo, we would like to show that we are a customer of the „Green
Dot“ system and want to comply with our obligations for system participation
according to the Packaging Act. The packaging is made of environmentally
friendly materials to be disposed of at local recycling centres.
Please pay attention to the labelling of the packaging materials when separating waste. They are labelled with abbreviations (a) and numbers (b) with the following meanings: 1-7: Plastics / 20-22: Paper and cardboard / 80-98: Composite materials.
In the interest of environmental protection, please do not dispose of your product in household waste when it is no longer needed. Instead, dispose of it properly or return it to us using the Recozy Exchange Program. The product will be recycled and reintegrated into our production cycle. For more information, visit www.recozy.de.
Warranty and Service
The warranty period is 24 months from the date of purchase. This includes a 6-month guarantee from the date of purchase. The geographical scope of the warranty protection is Europe-wide. The invoice serves as proof of purchase. The product has been thoroughly tested for quality and functionality before shipping
The warranty will be voided in the following cases:
- If the installation is faulty.
- If the system is modified without our approval.
- If the damages are caused by moisture, drops or damaged cables.
- If no proof of purchase is available
WEEE-Reg.-Nr. DE 88159560
Service address:
Sustainable Manufacturing GmbH
Industriepark 7
27777 Ganderkesee
Germany
Tel.: 0049 4222 7989902
E-Mail: [email protected]
www.recozy.de
Manufacturer:
Sustainable Manufacturing GmbH
Industriepark 7
27777 Ganderkesee
Germany
Tel.: 0049 4222 7989902
E-Mail: [email protected]
www.recozy.de
This product meets the requirements of the applicable European and national regulations. Conformity has been demonstrated. Corresponding declarations and documents are kept on file by the manufacturer.