Lenco DVP-125 Portable DVD User Manual

Lenco DVP-125 Portable DVD

CAUTION:
Usage of controls or adjustments or performance of procedures other than those specified herein may resultin hazardous radiation exposure.
This unit should not be adjusted or repaired by anyone except qualified service personnel.

PRECAUTIONS BEFORE USE
KEEP THESE INSTRUCTIONS IN MIND:

1. Do not use this device near water.

2. Clean only with a slightly damp cloth.

3. Do not cover or block any ventilation openings. When placing the device on a shelf, leave 5 cm (2”) free space around the whole device.

4. Install in accordance with the supplied user manual.

5. • Don’t step on or pinch the power adaptor. Be very careful, particularly near the plugs and the cable’s exit point. Do not place heavy items on the power adaptor, which may damage it. Keep the entire device out of children’s reach! When playing with the power cable, they can seriously injure themselves.
6. • Unplug this device during lightning storms or when unused for a long period.

7. Keep the device away from heat sources such as radiators, heaters, stoves, candles and other heat-generating products or naked flame.

8.  Avoid using the device near strong magnetic fields.

9. Electrostatic discharge can disturb normal usage of this device. If so, simply reset and restart the device following the instruction manual. During file transmission, please handle with care and operate inastaticfree environment.

10. Warning! Never insert an object into the product through the vents or openings. High voltage flows through the product and inserting an object can cause electric shock and/or short circuit internal parts. For the same reason, do not spill water or liquid on the product.

11. Do not use in wet or moist areas such as bathrooms, steamy kitchens or near swimming pools.

12. Do not use this device when condensation may occur.

13. Although this device is manufactured with the utmost care and checked several times before leaving the factory, it is still possible that problems may occur, as with all electrical appliances. If you notice smoke, an excessive build-up of heat or any other unexpected phenomena, you should disconnect the plug from the main power socket immediately.

14. This device must operate on a power source as specified on the specification label. If you are not sure of the type of power supply used in your home, consult your dealer or local power company.

15. • The socket outlet must be installed near the equipment and must be easily accessible.

16.  * Do not overload ac outlets or extension cords. Overloading can cause fire or electric shock.

17. • Devices with class1construction should be connected to a main socket outlet with a protective earthed connection.

18.  * Devices with class2construction do not require a earthed connection.

19.  Keep away from rodents. Rodents enjoy biting on power cords.

20.  * Always hold the plug when pulling it out of the main supply socket. Do not pull the power cord. This can cause a short circuit.

21. Avoid placing the device on any surfaces that may be subject to vibrations or shocks.

22. To clean the device, use a soft dry cloth. Do not use solvents or petrol based fluids. To remove severe stains, you may use a damp cloth with dilute detergent.

23.  The supplier is not responsible for damage or lost data caused by malfunction, misuse, modification of the device or battery replacement.

24.  Do not interrupt the connection when the device is formatting or transferring files. Otherwise, data may be corrupted or lost.

25. If the unit has USB playback function, the us memory stick should be plugged into the unit directly. Don’t use an usb extension cable because it can cause interference resulting in failing of data.

26. The apparatus shall not be exposed to dripping or splashing and make sure that no objects filled with liquids, such as vases, are placed on or near the apparatus.

27. • To completely disconnect the power input, the mains plug of the apparatus shall be disconnected from the mains, as the disconnect device is the mains plug of apparatus.

28.  If the unit works with battery, Battery shall not be exposed to excessive heat such as sunshine, fire or the like.

29. A end  should be drawn to the environmental aspects  disposal.

30. The apparatus can only be used in moderate extremely cold or climates warm environments should be avoided.
    The rang label has been marked on the bo om or back panel o he apparatus.
    This device is no Intended for use by people (including children) with physical, sensory or mental , or a lack of experience and knowledge, unless they’re under supervision or have received instructions about he correct use o he device by the person who is responsible for their safety.
    This produc s intended for non professional use only and no or commercial or industrial use.
    Make sure the units adjusted to a stable position. Damage caused by using this product  an unstable or by failure to follow any other warning or precau n contained within this user manual will not be covered by warranty.

31. Never remove the casing o his apparatus.

32.  Never place this apparatus on other electrical equipment.

33.  *Do not use a damaged power cord or plug or a loose outlet. Doing so may  fire or electric shock.

34. Prolonged exposure to loud sounds from personal music players may lead to temporary or permanent hearing loss.

INSTALLATION

• Unpack all parts and remove protecive material.
• Do not connect he union the mains before checking the mains voltage and before all other connec ons have
  been made.

*Those instruction are related only to products using power cable or AC power adaptor.

• Power supply adaptor
• Manufacturer: Mass Power Electronic Limited Model number: EFF0900150E1BA
• Only use the power supply listed in the user instruction

Identification of Controls

Main Unit

1. ANGLE

2. SOURCE

3.  BACKLIGHT

4. DISPLAY

5. MUTE

6. REPEAT

7.  VOL+/VOL-/

8. MENU

9. SETUP

10.  ZOOM

11.  AUDIO

12.  SUBTITLE 13.

13.  ■ STOP

14.  ▲/▼/◄/►/ /
    (Left/right/up/down/Fast forward/Fast reverse)

15. OK

16. OPEN

17. USB

18.  CARD SLOT

19. Earphone Socket

20. AV OUT

21. AV IN

22. POWER ON/OFF

23. DC IN 9-12V

24. ANT.

25. Battery Charging Indicator
    Illuminates green flashing when the battery is charging. Illuminates green when the battery is fully charged.

26. Power Indicator
    Illuminates red when the unitis switched on.

Remote control unit

1. SOURCE
   DVD/CARD/USB/DVB-T/AVIN.

2. MUTE
   Disable Audio output.

3. 0-9 NUMBER BUTTON
   Selects numbered items in a menu.

4. DISPLAY
   To display the playtime and status information.

5.  10+ BUTTON
   In order to select a track 10 or greater, first press 10+, For example; select track 12, first press 10+, and then press number 2 button.

6. PBC/FAV
   PBC on/off switch (VCD) in DVD mode. Open Favorite Programs List Menu in DVB mode.

7. AUDIO

8. PLAY/PAUSE
   Press PLAY/PAUSE once to pause playback, pressing PLAY/PAUSE second time will resume the playback.

9. STOP
   When this button is pressed once, the unit records the stopped point, from where playback will resume if

10. STEP/TV/RADIO
    Step the motion in DVD mode. Switch between TV and Radio source in DVB mode.

11. VOL+
    Adjust volume

12. Forward Skip
    Go to next chapter/track.

13. Reverse Skip
    Go to previous chapter/track to the beginning.

14. BUTTON
    Press forward BUTTON allow skipping ahead at 5-level speed (X2->X4->X8->X1 6->X32->PLAY), press PLAY button return to normal playback. return to normal playback.

15. Turn on/off the power.

16. SEARCH
    Go to time point, title or chapter you want in DVD Mode.

17. SUBTITLE
    Press SUBTITLE repeatedly during playback to hear a different subtitle languages.

18. ANGLE
    Press ANGLE will change the view angle, on DVDs that support this feature.

19. TITLE
    Return to DVD title menu

20. OK
    Confirms menu selection..

21. REPEAT
    Press REPEAT during playback to select a desired repeat mode.

22.  VOL-
    Adjust volume

23. SETUP
    Accesses or removes setup menu.

24. SLOW
    Press Slow button repeatedly to enter slow playback, and cycle between different speeds. The speeds are 1/2, 1/4, 1/8, 1/16, and normal.

25. PROGRAM
    The program function enables you to store your favourite tracks from the disc.
    Press PROGRAM button, then PROGRAM MENU will appear on screen, now you can use the number key to direct input the titles, chapters or tracks number and select PLAY option.
    TO resume normal playback, press PROGRAM and select clear program option on the program menu, press PROGRAM again to exit program menu.

26.  ZOOM

27.  Press ZOOM during playback or still playback to activate the Zoom function. The square frame appears briefly in the right bottom of the picture.

28. Each press of the ZOOM button changes the TV screen in the following sequence:
    2X size → 3X size → 4X size → 1/2 size → 1/3 size → 1/4 size → normal size

29.  RED/GREEN/YELLOW/BLUE KEY
    Some specific functions in DVB mode.

SETUP Menu Setting

General Setup Page
Press SETUP button to get the setup menu. Use direction buttons ▲ ▼ ◄ ► to select the preferred item. After finishing settings, press SETUP again to normal display.

The following menu items can be changed:
GENERAL: selects the GENERAL PAGE menu.
AUDIO: selects the AUDIO PAGE menu.
VIDEO: selects the VIDEO PAGE menu.
PREFERENCE: selects the PREFERENCE PAGE menu.

4:3 PANSCAN: if you have a normal TV and want both sides o he picture to be trimmed or forma d to fit your TV screen.
4:3 LETTERBOX: if you have a normal TV. In this case, a wide picture with black bands on the upper and lower portions o he TV screen will be displayed. 16:9: wide screen display.
Wide Squeeze: Set screen mode to 4:3.

Angle Mark
Displays current angle se ng information on on the right hand corner o he TFT screen if available on the disc.
OSD Language
You can select your own preferred language settings.
Closed Captions
Closed cap  are data that are hidden in the video signal of some discs. Before you select his function,
please ensure he disc contains closed cap  information and your TV set also has this function.
Screen Saver
Last Memory
This func on is used to turn the screen saver On or Off.
Auto Standby
If this function is switched to ON, the DVD will resume play on the last known position, when the unit was
stopped, powered down or dvd was reinserted.
standby mode a r 3 hours i here is no interac on from user within this period o ime. 4 HOURS: the unit
will turn to standby mode a r 4 hours i here is no interac on from user within this period o ime. OFF:
the auto standby func on is disabled, and unit will stay in “on” mode even if no interac on from user.

Audio Setup Page

Downmix
This options allows you to set the stereo analog output of your DVD Player.

• LT/RT: Select this option if your DVD Player is connected to a Dolby Pro Logic decoder.
•  Stereo: Select this option when output delivers sound from only the two front speakers.

Dolby digital
The options included in Dolby Digital Setup are: ‘Dual Mono’ and ‘Dynamic’.

Dual Mono

• Stereo: Left mono sound will send output signals to Left speaker and Right mono sound will send output signals to Right speaker.
• L-Mono: Left mono sound will send output signals to Left speaker and Right speaker.
• R-Mono: Right mono sound will send output signals to Left speaker and Right speaker.
•  Mix-Mono: Left and Right mixed mono sound will send output signals to Left and Right speakers.

Dynamic
Dynamic range compression.

Video Setup Page

Brightness, Contrast, Hue, Saturation: setting the video quality.

Preference Page

TV Type
Selecting the colour system that corresponds to your TV when AV outputs. This DVD Player is compatible
with both NTSC and PAL.
PAL – Select this if the connected TV is PAL system. lt will change the video signal of a NTSC disc and output
in PAL format.
NTSC – Select this if the connected TV is NTSC system. lt will change the video signal of a PAL disc and output
in NTSC format.
Auto: Chang the video signal output automatic according to the playing disk format.
Audio: Selects a language for audio (if available).
Subtitle: Selects a language for subtitle (if available).
Disc Menu: Selects a language for disc menu (if available).

Parameters and specifications

Electronical parameters

Output

| VIDEO OUT|
AUDIO OUT| 1.4 Vrms (1 KHz, 0 dB)
Audio| Speakers WX2, Headphones output

System

Note: Design and specifications are subject to change prior notice.

Battery Parameters

• Battery Specifications: Output: 7.4V
• Charge/Discharge Time: Standard charge time: 3h ~ 4h
• Storage and work circumstances:
  • Storage circumstances Temperature Humidity
  • 6 months -20°C ~ +45°C 65±20%
  • 1 week -20°C ~ +65°C 65±20%
  • Work circumstances Temperature Humidity
    Standard charge 0°C ~ +45°C 65±20%
    Standard discharge -20°C ~ +65°C 65±20%

First Time Installation

After all connections have been made properly, switch on TV and make sure the receiver is connected to the Main Power. Press Power Button to switch receiver on. If you are using the receiver for the first time or restored to Factory Default, the Main Menu will appear on your TV screen.

1. Select [OSD Language] and press RIGHT/LEFT key to select a language.
2. Select [Country] and press RIGHT/LEFT key to select your country of residence.
3. Select [Channel Search] and press RIGHT or OK key to begin Automatic channel search.
4. Once channel tuning is complete, you are now ready to watch TV.

Basic Operation
Program Manage Settings
To access the Menu, press the SETUP button and select [Program], The Menu provides options to adjust the Program Manage Settings.
Select an option and press OK or RIGHT to adjust that setting. Press the EXIT button to exit the Menu.

Program Edit
To edit your program preferences (lock, skip, favourite, move or delete), you will need to enter the Program Edit Menu. This Menu requires a password to access. Enter the default password ‘000000’.

First Time Installation

Set Favourite Program/s
You can create a shortlist of favourite programs that you can easily access. Set Favourite TV or Radio program:

1. Select the preferred program then press the FAVOURITE button. A heart-shaped symbol will appear and the program is marked as a favourite.
2.  Repeat the previous step to select more Favourite programs.
3. To confirm and exit the Menu, press the EXIT key.

Disable Favourite TV or Radio Program:
Press the FAV button on the Remote Control with the heart-shaped symbol.

View Favourite Programs:

1. Press the Fav button and the Favourite Menu will appear.
2. Press UP/DOWN to select your Favourite Programs.
3. Press OK to select your favourite program.

Delete a TV or Radio Program/s

1. Select the Program and then press the BLUE button A message will appear. Press OK to delete the program.
2. Repeat the previous step to select more programs to delete.

Skip TV or Radio Program/s

1.  Select the program you would like to skip and press the GREEN button A skip symbol is displayed. The program is marked as a skip.
2. Repeat the previous step to select more programs.
3. To confirm and exit the menu, press EXIT key.

Disable a skip TV or Radio Program:
Press the GREEN button on the skip program with the skip symbol.

Move a TV or Radio Program/s

1. Select the preferred program then press the RED button. A move symbol will appear.
2. Press UP/DOWN to move the program.
3. Press OK to confirm.
4. Repeat the above steps to move more channels.

Lock Program/s
You can lock selected programs for restricted view. Lock a TV or Radio Program:

1. Select the preferred program then press the YELLOW button. A lock-shaped symbol is displayed. The program is now marked as locked.
2. Repeat the previous step to select more programs.
3.  To confirm and exit the menu, press the EXIT button.
4. Press the YELLOW button to disable the locked program.
5. To view the locked program, you will be required to enter either the default.

Sort

Sort your channels from the following options:
[LCN] – Sort the channels in ascending order.
[Name] – Sort the channels in alphabetical order.
[Service ID] – Sort the channels according to the station.

LCN (Logical channel number)
Set LCN on or off.

Video Setting
To access the Menu, press SETUP then select [Picture]. The Menu provides options to adjust the video settings. Press UP/DOWN to select an option and press RIGHT/LEFT to adjust that setting. Press EXIT to exit the menu.

Aspect Ratio
You must set the display format to either 4:3 PanScan, 4:3 Letter Box, 4:3 Full, 16:9 Wide Screen, 16:9 PillarBox or Auto to get the maximum display when watching TV.

TV format
If the video does not appear correctly, you need to change the settings. This should match the most common setting for TVs in your country.
[NTSC]: for NTSC system TV.
[PAL]: for PAL system TV.

Channel Search
To access the menu, press SETUP and select [Search Channel], The Menu provides options to adjust the Search Channel settings. Select an option and press RIGHT/LEFT to adjust the settings.
Press EXIT to exit the Menu.

Auto Search
Search and install all channels automatically. This option overwrites all preset channels.

1. Select [Auto Search] and press OK or RIGHT to start channel search
2. To cancel channel search, press EXIT.

Manual Search
Install new channels manually. This option adds new channels without changing the current channels list.

1. Select [Manual Search] then press OK or RIGHT. The channel search screen will appear.
   First Time Installation

2. Press the RIGHT/LEFT key to select the channel frequency.

3. Press OK to start searching channels. If a channel is found, it is saved and added to the channels list. If channels can’t be found, then exit the menu.

Country
Select your country of residence.
Time Setting
To access the Menu, press SETUP then select [Time]. The Menu provides options to adjust the time settings. Press UP/DOWN to select an option and press RIGHT/LEFT to adjust the settings.
Press EXIT to exit the menu.

Time offset
Select auto or manual for GMT offset adjustments.
Country Region
Select the Country Region when [Time Offset] is set to Auto.
Time Zone
Select the Time Zone Offset when [Time Offset] is set to Manual.
First Time Installation

Option
To access the Menu, press SETUP and select [Option]. The menu provides options to adjust the OSD Language,
Subtitle Language and Audio Language. Select an option and press RIGHT/LEFT to adjust the setting. Press EXIT to exit The Menu.
OSD Language
Select an OSD language.
Audio Language
Select the preferred audio language for watching TV channels. lf the language is not available, the default program language will be used.
Subtitle Language
Select the preferred subtitle language.
System Setting
To access the Menu, press SETUP and select [System].The menu. Provides options to adjust the system settings. Press the UP/DOWN key to select an option and press RIGHT/LEFT to adjust the setting. Press EXIT to exit the Menu.
Parental Guidance
You can restrict access to channels that are unsuitable for children. To restrict/lock the channel you will need to enter either the default password ‘000000’ or your own password.
Set Password
Set or change the password for Locked programs. Enter your old Password or the default password ‘000000’. You will then be asked to enter your new password. To confirm re-enter your new password.
Once it is confirmed, press EXIT to exit the Menu.
Restore Factory Default
Reset your Set Top Box to the Default Factory Settings. In Main Menu select [Restore Factory Default] and press OK or RIGHT to select. Enter your password or the default password ‘000000’ and press OK to confirm. This option will delete all preset channels and settings.
Information
View model, hardware and software information.
Software update
After selected, it will begin searching for new software from USB device.
USB
To access the Menu, press the SETUP button and select USB
Multi-Media
Switch to USB mode and plug in USB to view files. Photo Configure
Set the parameters for viewing photographs. Movie Configure
Set the parameters for displaying movie subtitles.

Technical Specifications

Tuner

| Input Frequency| 170~230MHz
470~860MHz
RF |nput level| -79dBm (T), -75dBm (T2)
IF Bandwidth| 7MHz and 8MHz
Modulation| QPSK, 16QAM, 64QAM, 128QAM (T2), 256QAM (T2)
Video| Decoder Format| mpeg-2/4, h.264, h.265, vc-1, avs/avs+, VP8, VP9
Output Format| 480i, 480p, 576i, 576P, 720P, 1080i, 1080P, 4:3 and 16:9

Troubleshooting

Make sure cables are connected correctly
The program is a radio program| Press <TV/RADIO> key to shift into

TV mode

Remote Control is not responding| The battery is exhausted| Change battery
Remote Control is not facing or close enough to the Set Top Box| Adjust the position of the Remote Control and move closer to the unit
The image stopped suddenly or mosaic| The signal is too weak| Strengthen the signal

Important remarks for the reception o he TV channels:

• The base o he antenna is c; forester reception o he TV signal, if available, put he base of the antenna on a metallic surface like the bodywork of a car, a fridge, a heating…
• The DVP-125 can only receive non encrypted free TV channels.

Guarantee

Lenco offers service and warranty in accordance with the European law, which means that in case of repairs (both during and after the warranty period) you should contact your local dealer. Important note: It is not possible to send products that need repairs to Lenco directly. Important note: If this unit is opened or accessed by a non-official service center in any way, the warranty expires. This device is not suitable for professional use. In case of professional use, all warranty obligations of the manufacturer will be voided.

Disclaimer
Updates to Firmware and/or hardware components are made regularly. Therefore some of the instruction, specifications and pictures in this documentation may differ slightly from your particular situation. All items described in this guide for illustration purposes only and may not apply to particular situation. No legal right or entitlements may be obtained from the description made in this manual.

Disposal of the Old Device
This symbol indicates that the relevant electrical product or battery should not be disposed of as general household waste in Europe. To ensure the correct waste treatment of the product and battery, please dispose them in accordance to any applicable local laws of requirement for disposal of electrical equipment or batteries. In so doing, you will help to conserve natural resources and improve standards of environmental protection in treatment and disposal of electrical waste (Waste Electrical and Electronic Equipment Directive).

Service
For more information and helpdesk support, please visit www.lenco.com Lenco Benelux BV; Thermiekstraat la, 6361 HB, The Netherlands.

References

• Lenco.com | Officiële Lenco Webshop‎

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>