NPYSVSSS 3 Way On Off Shower System Instruction Manual
- May 15, 2024
- NPYSVSSS
Table of Contents
INSTALLATION MANUAL
(3-way On-off Shower System )
Please do not hesitate to contact us with your questions, concerns and/or
problems, we’re here to help.
Customer Support:[email protected]
Packing list
PRODUCT DIMENSIONS
(unit:mm)
ACCESSORIES LIST
| Serial numeber | Designation |
|---|---|
| 1 | Valve |
| 2 | Protective cover |
| 3 | Panel |
| 4 | Rubber ring |
| 5 | Knobs |
| 6 | Hexagon screw |
| 7 | Button |
Exploded view
| Serial numeber | Designation |
|---|---|
| 1 | Valve |
| 2 | Switch valve core |
| 3 | Check valve |
| 4 | Temperature valve core |
| 5 | “C” limiting stopper |
INSTALL SHOWER VALVE
Step 1: Determine the position of the valve. Then drill, hammer in the
anchors, fasten the valve body to the wall. Step 2: Connect each
takeover,then connect the water source to confirm that there is ‘no
leakage.
Step 3: Adjust the embedded body to the horizontal line,and fix the
embedded body on the wall with a cross screwdriver to lock the 4 self-tapping
screws.Seal the pipeline with cement filler. Step 4: Balance the panel on
the main body,Put on the knobs and accessories. COMPLETE DIAGRAM
Something you may need to know: 
Align the marks on the temperature valve stem. Sleeve
the plastic ring onto the valve stem with the “”C” shape opening facing the
right.
INSTALL SIDE SPRAY
- Set the decorative cup on the nozzle.
- Roll the teflon tape on the thread of the nozzle.
- Tighten the 4 nozzles clockwise on the outlet hole of the nozzle by hand.
INSTALL SHOWER SEAT
- Wrap supply elbow thread with Teflon tape and attach cover plate to it.
- Screw the shower holder clockwis onto te hand-shower outlet.
- Place rubber washers in both ends of the hose. Chnect the shower hose to the supply elbow and shower head. Note the ends of shower hose to be connected correctly.
INSTALL OVERHEAD SHOWER
(Only include one kind of shower arm depend on what kind of shower system you
purchase)
Wall Mounted
- Set the decorative Cup on the shower arm.
- Wrap taflon tape on the longer end.
- Tighten the shower arm clockwise on the water outlet hole of the shower arm.Then put the overhead shower on the shower arm.
Ceiling Mount
- Set the decorative Cup on the shower arm and roll the teflon tape on the thread.
- Tighten the shower arm clockwise on the water outlet hole of the shower arm.Then put the overhead shower on the shower arm.
PIPELINES CHEMATIC
