ALDI MAL 4030-039A Brilo LED Pendant Light Instruction Manual

ALDI MAL 4030-039A Brilo LED Pendant Light

Safety Directions

Please read this information carefully before installing or using this product. Please keep this user manual for further reference.

1. The lamps may only be installed by authorized and qualified technicians according to the valid regulations for electrical installation.
2. The manufacturer does not accept any responsibility for injuries or damage resulting from improper use of the light.
3. Maintenance of the lights is limited to the surfaces. When doing this, no moisture must come into contact with any areas of the terminal connections or main voltage control parts.
4. Attention! Before starting the installation work, make sure that the mains power line is voltage-free – turn off the safety cutout or unscrew the protection fuse. The switch must be “OFF”.
5. Warning! Before drilling the mounting holes, make sure that no gas, water or electricity pipes and wires can be drilled through or damaged in your chosen mounting location.
6. When mounting, ensure that the attachment material is suitable for the subsurface and that this surface is capable of carrying the weight of the fixture. The manufacturer is not liable for improper installation of the item on the relevant subsurface.
7. The symbol of the crossed-out garbage can on the product or the packaging means that the product must not be disposed of with ordinary household waste. At the end of its useful life, the product must be returned to a point of acceptance for the recycling of electric and electronic devices. Please ask your local municipality for the point of acceptance.
8. Safety class II S. This light is specially insulated and must not be connected to an earthed conductor.
9. Protection class II. Take note that when switching on that the building site supply lines available have double or reinforced insulation up to the terminal connection area. The enclosed terminal box ensures that when the building site conductors with basic insulation have a maximum length of “80 mm“.
10. Description of the supply terminals: L = Phase N = Neutral conductor G = Earthed conductor.
11. Protective covers and end covers for mains voltage control parts must always be mounted.
12. Do not install the light on a damp or conductive subsurface.
13. Please make sure that no cables get damaged during the installation work.
14. Attention! During operation, lamp parts and illuminants can reach temperatures of more than 60°C. Do not touch during operation!
15. The lamp may only be adjusted and positioned after having cooled down.
16. The lights have a protection class rating of “IP20“ and are solely intended for indoor use only of private households.
17. Do not look directly into the light source (illuminant, LED, etc.).
18. The light source of this lamp is not replaceable; when the light source reaches its end of life the whole luminaire shall be replaced.
19. ( The operating device (transformer, ballast, control unit, etc.) may only be replaced by the manufacturer or trained personnel.
20. LED colour deviation when using different chargers may occur. The light colour and luminous strength of the LEDs can also change as a result of life span level of the lamp.
21. This article is not suitable for use with dimmable electric circuits.
22. This light features an electronic step dimmer. The “3” dimmer settings of the light can be cycled by repeatedly switching the power on and off within “>1” second each. In this respect, it is irrelevant how the light is switched (off, two-way or cross-circuit). It is only important the mains is connected and disconnected from the light.
23. memory function: The lamp is switched on using an external light switch after a minimum off period of approx. “5” seconds with the last selected function or switch position.
24. This product contains a light source of energy efficiency class “F“, based on the EU regulation 2019/2015.

Mounting Iinstructions

Verehrter Kunde
Sollten sich trotz neuester Fabrikationsmethoden und genauesten Qualitätskontrollen wider Erwarten Mängel herausstellen, wenden Sie sich bitte unter Angabe des Kaufdatums, des Kaufortes und der Artikelnummer des Produktes an folgende kostenlose Hotline: 00800/BRILONER (00800/27456637)
Briloner Leuchten / Im Kissen 2 / 59929 Brilon.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>