BUNKER 33196, 33162 Wall Cabinet with Wall Brackets Installation Guide
- October 30, 2023
- BUNKER
Table of Contents
BUNKER 33196, 33162 Wall Cabinet with Wall Brackets
Product Information
This user manual provides instructions for installing the back panel or wall cabinet with wall brackets. The product is available in two variants, single and double, with stock numbers 33196 and 33162, respectively. The assembly requires the use of M8 x16mm bolts, 18 x 8 x 1mm washers, 14 x 8.8 x 2.6mm spring washers, M6 x 16mm bolts, M6 nuts, and 12 x 6.5 x 0.8mm spring washers. The product is manufactured and distributed by Draper Tools Limited, a UK- based company located in Eastleigh, Hampshire.
Product Usage Instructions
- Before starting the assembly, it is recommended to have two persons aid one another in the process.
- Attach the wall bracket to the cabinet using M8 x16mm bolts, 18 x 8 x 1mm washers, and 14 x 8.8 x 2.6mm spring washers. Tighten the bolts using a wrench.
- Attach the back panel to the wall bracket using M6 x 16mm bolts, M6 nuts, and 12 x 6.5 x 0.8mm spring washers. Tighten the bolts using a wrench.
- Attach the wall cabinet to the wall bracket using M8 x 16mm bolts, flat washers (8 x 8 x 1mm), and spring washers (14 x 8.8 x 2.6mm). Tighten the bolts using a wrench.
- If connecting two cabinets, remove the drawers and open the doors before starting the connection process.
- Connect the side panels of two cabinets using M6 x 16mm bolts and M6 nuts. Tighten the bolts using a wrench.
INSTALLATION INSTRUCTION
To make assembly easier we recommend having two persons aid one another in assembly.
STEP 1:
- Attach wall bracket (single and double) to cabinet with bolt M8 x16mm, washer 18 x 8 x 1mm and spring washer 14 x 8.8 x 2.6mm, and tighten with wrench (not included).
STEP 2:
- Attach back panel to wall bracket (single and double) with bolt M6 x 16mm, nut M6 and spring washer 12 x 6.5 x 0.8mm, and tighten with wrench (not included).
STEP 3:
- Attach wall cabinet to wall bracket (single and double) with bolt M8 x 16mm, flat washer 8 x 8 x 1mm and spring washer 14 x 8.8 x 2.6mm, and tighten with wrench (not included)
STEP 4:
- Connect the side panels of two cabinets with M6 x 16mm and nut M6, and tighten with wrench (not included).
CABINET CONNECTION
- Connect the side panels of two cabinets with (4) bolt M6 x 16mm and nut M6, and tighten with wrench (not included).
- Note: remove the drawers and open the doors before cabinet connection.
- drapertools.com
- Draper Tools Limited, Hursley Road, Chandler’s Ford, Eastleigh, Hampshire. SO53 1YF UK.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>