wopet FT70 Castle Automatic Feeder User Guide
- May 15, 2024
- WOPET
Table of Contents
QUICK OPERATION GUIDE
Castle Automatic Feeder
Model: FT70 & FT70 Plus
DISPLAY OVERVIEW:
BUTTONS OVERVIEW:
NOTE:
Will lock automatically after 2 min of inactivity. Hold for 2s to unlock.
| Button | Description | Operable Mode Function |
|---|---|---|
| Set /Save | ||
| Unlock button | • Press to save and move to the next step. |
• Press and hold for 2s to lock/unlock other buttons and screen.
| Return /
Cancel button| • Return to the previous step.
• Return to interface after setting up.
| Number Increase button| • Press to increase the value.
| Number Decrease button| • Press to decrease the value.
| Manual button| [Must be Unlocked] Press to feed 1 portion.
| Recording button| • [Must be Unlocked] Hold for 3s and start recording after
a beep is heard {max 10s}.
• Recoding saved after a double beep is heard.
SCREEN PANEL INTRODUCTION:
| ICON | Function of ICON |
|---|---|
| • Locks automatically after 2 min of inactivity. |
• Hold button for 2 seconds to unlock.
| Flash Indicates:
• Powered by adapter or battery.
Note: when flashing, press button to set up/ modify the
current time.
| • Local time.
| • Number of meals.
| • Lights up when running on battery power.
Turns red to indicate low battery.
INSTRUCTION MANUAL:
STEP 1 — Setting Current Time
Note:
Clock icon flashes when powered as shown in fig.(01).
[If Screen is Locked]
Press and hold for 2s to unlock screen as shown in fig.(02).
TIP: Please note the conversion between 24-hour format and 12-hour
format.
Example: 9:00AM = 9:00; 10:00PM = 22:00 More as below:
12-hour Clock 24-hour Clock Comparison Chart
| 00:00 (Midnight) | 00:00 (Beginning of the day) |
|---|---|
| 01:00AM | 1:00 |
| 02:00AM | 2:00 |
| 03:00AM | 3:00 |
| 04:00AM | 4:00 |
| 05:00AM | 5:00 |
| 06:00AM | 6:00 |
| 07:00AM | 7:00 |
| 08:00AM | 8:00 |
| 09:00AM | 9:00 |
| 10:00AM | 10:00 |
| 11:00AM | 11:00 |
| 12:00AM (noon) | 12:00 |
| 01:00PM | 13:00 |
| 02:00PM | 14:00 |
| 03:00PM | 15:00 |
| 04:00PM | 16:00 |
| 05:00PM | 17:00 |
| 06:00PM | 18:00 |
| 07:00PM | 19:00 |
| 08:00PM | 20:00 |
| 09:00PM | 21:00 |
| 10:00PM | 22:00 |
| 11:00PM | 23:00 |
| 12:00PM (Midnight) | 24:00 (End of the day) |
STEP 1.1— HOUR SETTING
[ Must be Unlocked ]
Press to set the “hour”of the time. The two hour digits flash, press to set
the “hour”.
STEP 1.2— MINUTE SETTING
[ Must be Unlocked ]
After setting hour, press to move to set the “minute” of the time. press to
set the “minute”. Press to save.
Note:
Press to modify if needed.
STEP 2 —Setting Meal
STEP 2.1
Press then “1” flashes to set up the first meal.
STEP 2.2
Press to set the “hour” of the time, Press to set the “hour”. Press to move
to set the“ minute” of the time. Press to save.
STEP 2.3
Press to set up portion then press button to save.
Note:
Press to modify if needed. STEP 2.4
Press to move to set other meals.
Repeat above step to set up meal time and portion. STEP 3 —Return to
Interface
STEP 3.1
Press to return to interface when setting up as shown in fig.(01).
(Numbers NOT displayed when portion set to 0 as shown in fig.(02)).
STEP 3.2
Press to modify local time, feeding time and portion if needed.
STEP 4 — Locking & Unlocking
Lock:
Press to return to interface when setting up, press for 2s to lock the
screen, the lock icon will display.
(Note: Locks automatically after 2 min of inactivity).
Unlock:
Press and hold for 2s to unlock the screen, the lock icon will disappear.
STEP 5 —Recording
[ Must be Unlocked ]
Hold for 3s and start recording after a beep is heard (max 10s).
Double beep indicates recording is saved.
STEP 6 —Manual Feed
[ Must be Unlocked ]
Press to feed 1 portion.
STEP 7 —Reset to Factory Default
[ Must be Unlocked ]
Press and hold and at the same time for 3s until a beep is heard.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>