DAEWOO WVD301 Wireless Vibration Sensor Installation Guide
- June 9, 2024
- Daewoo
Table of Contents
WIRELESS VIBRATION SENSOR
WVD301
QUICK INSTALLATION GUIDE
WVD301 Wireless Vibration Sensor
DAEWOO SECURITY Alarm system accessories
PRODUCT DESCRIPTION
It adopted the detected theory of vibration. Once it detects any vibration, it
will automatically send wireless signal to the control panel for alarm. It
needs to work with alarm panel together, can’t work alone.
It protects in 24 hours to prevent violence (drill, strike, saw etc.) from
entering the protected door, window and ceiling and so on. Popular used for
window, door, safe guard box, cash box, ATM, night safe guard box, wall,
ceiling, device, file cabinet, electrical contacted door and so on. With the
high quality sensitive units, it guarantees using life and performance. Long
life, high performance rate ratio, low so effectively to prevent from false
alarm.
SPECIFICATION
- Power supply : Dry battery : A23. 12V DC
- Max current : 20mA ; Mini current : 10mA
- Pulse output time : .5ms~50msRF
- Low battery alarm: Low battery LED is on when it is lower than 8V DC.
- Wireless frequency : 433 MHz, eV1527area )
- Transmitting distance: noninterference ≥100m: indoor about 30~50 m
- Operating temperature: indoor -10 ~ 50°C related humidity ≤ 95%
- Chip : 1527,330k resistance
INSTALLATION
After having correctly installed your AM301 central to your Daewoo Home Connect control application, you can add your vibration detector.
- Click on “add an accessory +” from the page of your AM301 alarm control unit.
- Choose the section dedicated to your vibration detector.
- Then remove the safety tab from the detector
- Shock the detector so that it is recognized by the control unit.
- Stick the vibration sensor vertically by the double adhesive tape on the target you want to protect. For example, window glass, door, etc.
Adjust the position of your detector according to its sensitivity. The further the shock is from the detector, the less effective its detection will be.
LED INSTRUCTION
Blue LED lights : It will flash 1 time for alarm
Red LED lights : it will be always on for low-voltage 8V
MAINTENANCE
Do not hesitate to consult the assistance page of our website to answer the
problems encountered with this device or find the complet user manuel.
www.daewoo-security.fr
You have not found the answer to your question ?
Our technical department can be contacted by e-mail at the following address :
support@daewoo-security.fr
STANDARS
This product bears the selective sorting symbol for waste electrical and
electronic equipment (WEEE). This means that this product must be handled
pursuant to European Directive 2012/19/EU in order to be recycled or
dismantled to minimize its impact on the environment. For further information,
please contact your local or regional authorities. Electronic products not
included in the selective sorting process are potentially dangerous of
hazardous substances.
In compliance with European Laws. This product is in the essential
requirements and other relevant provisions of Directive 2014/53/EU ( RED )
substances
This product was designed and manufactured in compliance with Directive
2011/65/EU of the European Parliament and of the Council on the restriction of
use of certain hazardous substances in electrical and electronic equipment (
RoHS Directive – RoHS ) and is deemed to comply with the maximum concentration
values set by the European Technical Adaptation Committee ( TAC )
Manufactured in China
References
- SECURITY Développement informatique
- Daewoo | Systèmes de sécurité personnalisables et sans abonnement.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>