beurer FC 52 Silicone Face Cleansing Brush Instruction Manual

: June 1, 2024
: Beurer

Table of Contents

beurer FC 52 Silicone Face Cleansing Brush
Product Information
Product Usage Instructions
Device description
Included in delivery
Cleaning
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

beurer FC 52 Silicone Face Cleansing Brush

beurer-FC-52-Silicone-Face-Cleansin-Brush-PRODUCT

Specifications

Input: 5.0 V 1.0 A
Dimensions: 11.3 x 7.8 x 4.8 cm
Weight: Approximately 80 g
Battery : 200 mAh 3.7 V Li-Ion

Product Information

This product is a handheld facial brush designed for use on the human face (excluding the eye area). Please read the instructions carefully before use.

Product Usage Instructions

Included in Delivery:

Check that all components are present and there is no visible damage before use.

1 x Hand-held device
1 x USB-C charging cable
1 x Holder
1 x Instructions for use

Warnings and Safety Notes:

Only use the device for its intended purpose as described in the instructions. Do not use on the eye area.

Specialist personnel should handle repairs on electrical devices. Contact a certified specialist workshop for repairs.

Initial Use:

Charge the device for at least 2 hours before the initial operation
Insert the mains cable into the charging socket on the side of the facial brush.
Insert the USB plug into a suitable mains adapter and connect it to the mains socket.
While charging, the white LED light above the On/Off button will flash. When fully charged, the LED light will remain on.

FAQ

Q: Can this facial brush be used on sensitive skin?
- A: This facial brush is suitable for most skin types but may not be suitable for extremely sensitive skin. It is recommended to perform a patch test before regular use.
Q: How often should I replace the brush head?
- A: It is recommended to replace the brush head every 3-4 months for optimal performance and hygiene.

Device description

beurer-FC-52-Silicone-Face-Cleansing-Brush-FIG8

Cleansing area
Massage area
ON/OFF button
Intensity control – / +
Charging socket with waterproof sea
LED light for displaying the battery level, charging process and changes in intensity
Support

Read these instructions for use carefully and keep them for later use, be sure to make them accessible to other users and observe the information they contain.

Included in delivery

Check that the exterior of the delivery cardboard packaging is intact and make sure that all components are present. Before use, ensure that there is no visible damage to the device or accessories and that all packaging material has been removed. If you have any doubts, do not use the device and contact your retailer or the specified Customer Service address.

1 x hand-held device
1 x USB-C charging cable
1 x Holder
1 x instructions for use

Warnings and safety notes

WARNING

The danger of sublocation by packaging material. Keep packaging material away from children.
Before use, inspect the device and accessories for visible damage. If you have any doubts, do not use the device and contact your retailer or the specified Customer Service address.
The hand-held part must be disconnected from the connection cable before it is cleaned in water.
When using the device in the bathroom, unplug the plug after charging as water in the vicinity constitutes a danger, even when the device is switched.
Keep the device away from extended exposure to direct sunlight, extreme heat or boiling water.
Avoid using corrosive cleaning products or care products which are clay or silicone-based.
The device is only intended for domestic/private use, not for commercial use.
This device may be used by children over the age of 8 and by people with reduced physical, sensory or mental skills or a lack of experience or knowledge, provided that they are supervised or have been instructed on how to use the device safely, and are fully aware of the consequent risks of use.
Children must not play with the device.
Cleaning and user maintenance must not be performed by children unless supervised.
If the mains connection cable of this device is damaged, it must be disposed of. If it cannot be removed, the device must be disposed of.
Under no circumstances should you open or repair the device yourself, as faultless functionality can no longer be guaranteed thereafter. Failure to adhere to this instruction will void the warranty.

WARNING

Do NOT use the device
on broken skin.
on open wounds.
if you suffer from a skin disease or irritated skin.
immediately after sunbathing.
if you are taking medication that contains steroids.

Intended use

The device is only to be used on the human face (apart from the eye area). The device is only intended for the purpose described in these instructions for use. The manufacturer is not liable for damage resulting from improper or careless use.

Notes on handling batteries

If your skin or eyes come into contact with fluid from the battery cell, flush out the affected areas with plenty of water and seek medical assistance.
Risk of explosion! Never throw batteries into a fire.
Do not disassemble, split or crush the rechargeable batteries.
Only use chargers specified in the instructions for use.
Batteries must be charged correctly prior to use. The instructions from the manufacturer and the specifications in these instructions for use regarding correct charging must be observed at all times.
Fully charge the battery prior to initial use.
In order to achieve as long a battery service life as possible, fully charge the battery at least twice per year.

IMPORTANT

Only specialist personnel may perform repairs on electrical devices. Improper repairs may subject users to considerable danger. In the event of a fault or damage, have the device repaired by a certified specialist workshop.

Signs and symbols

The following symbols are used on the device, in these instructions for use, on the packaging and on the type plate for the device:

beurer-FC-52-Silicone-Face-Cleansing-Brush-FIG2

Initial use

Charge the device for at least 2 hours before initial operation. To do this, proceed as follows:

Insert the mains cable into the charging socket on the side of the facial brush.
Insert the USB plug into a suitable mains adapter and connect this with the mains socket.
Whilst charging, the white LED light above the On/O button of the facial brush will flash.
When the battery is fully charged, the LED light will remain on.

Note

If the battery level is very low, the white LED light will light up three times in succession when pressing the On/OFF button.

IMPORTANT

Do not use the device while it is charging!

Use

Moisten the FC 52 facial brush with water. Never use the device while it is dry, as this can irritate the skin.
Apply the cleansing gel to your facial skin.
Press the On/OFF button once to switch on the device. The LED light will briefly flash once and the facial brush will begin to vibrate.
The device has a total of 15 intensity levels and when turned on, will begin to vibrate at a moderate speed setting. To switch between the individual intensity levels, press the – / + button. The LED light will briefly flash 1x each time the intensity level is changed.
Now apply the device gently to your face and cleanse your face using even movements. For cleansing the delicate skin around the eyes, use a lower intensity level. The massage area can also be used for massages.
After use, switch the device oFF by again pressing the On/OFF button again.
Cleanse your face thoroughly with water to remove any residue from your skin.
Pat your face dry with a towel and then apply a moisturizing cream using even, circular movements.

IMPORTANT

Stop use immediately if use of the facial brush leads to reactions, and consult your doctor.

Note

To ensure comfortable treatment, do not press the silicone nubs too firmly against the skin. Treat each section of skin for a maximum of 20 seconds. We recommend a daily cleansing routine of 1 minute mornings and evenings. To achieve an efficient result, the duration of use should not exceed 3 minutes. The facial brush switches oFF automatically after 15 minutes.

Cleaning

IMPORTANT

Never clean the device with cleaning products containing alcohol, petrol or acetone.
Clean the device using only the methods specified.
Thoroughly clean the device after every use. Clean the silicone nubs with soap and water. Afterward, rinse oFF the soap residue with water.
Pat dry the device with a lint-free cloth.
Ensure that no water gets inside the charging socket. If this occurs, only charge the device once the opening has fully dried.

Disposal

The empty, completely flat rechargeable batteries must be disposed of through specially designated collection boxes, recycling points or electronics retailers. You are legally required to dispose of the batteries.
The codes below are printed on rechargeable batteries containing harmful substances:
Pb = Battery contains lead
Cd = Battery contains cadmium
Hg = Battery contains mercury

For environmental reasons, do not dispose of the device in the household waste at the end of its service life.
Dispose of the device at a suitable local collection or recycling point in your country. Dispose of the device in accordance with EC Directive – WEEE (Waste Electrical and Electronic Equipment).

If you have any questions, please contact the local authorities responsible for waste disposal. The device battery must be disposed of separately. The battery must not be disposed of with domestic waste.
To remove the battery, remove the plastic cover at the bottom of the device and then unscrew the housing. Remove the battery from the device and dispose of it at a suitable collection point. For information on disposal, please contact the authorized seller or the public authority of a suitable collection point.

Technical data

beurer-FC-52-Silicone-Face-Cleansing-Brush-FIG7