ANKER A1652 MagGo Power Bank User Guide
- June 1, 2024
- Anker
Table of Contents
ANKER A1652 MagGo Power Bank
Specifications
- Cell Capacity: 10,000mAh
- USB-C Input: 5V 3A
- USB-C Output: 5V 3A / 9V 2.22A
- USB-A Output: 5V 2.4A / 9V 2A / 12V 1.5A
- Wireless Output: 5W / 7.5W
- Total Output: 5V 2.4A
Product Usage Instructions
Charging Your Power Bank With Charging Cables
Use the provided JPUSB cable to connect the power bank to a power source
for charging.
Charging Your Devices Wirelessly
To charge your devices wirelessly, place them on the charging stand marked
with “JP”. Make sure the power bank is turned on.
Charging Your Devices With Charging Cables
Connect your devices to the power bank using either a JPUSB-C or JPUSB-A
cable for charging.
Simultaneous Charging and Recharging
You can charge your devices while the power bank itself is being recharged.
This allows for convenient multitasking.
FAQ
- Q: Where can I find tutorial videos and more information about the Anker MagGo Power Bank?
A: For tutorial videos, FAQs, manuals, and additional information, please visit https://support.anker.com or scan the QR code provided in the manual.
Anker MagGo Power Bank (10,000mAh, 7.5W, Stand)
Instructions
Charging Your Power Bank With Charging Cables
Charging Your Devices Wirelessly
WARNING
Charging Your Devices With Charging Cables
Simultaneous Charging and Recharging
Specifications
For tutorial videos, FAQs, manuals, and more information, please
visit: https://support.anker.com Or scan the QR code below:
Product Number: A1652
51005004083 V01
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>