DORMAN 99164 Keyless Entry Remote Instruction Manual
- June 1, 2024
- DORMAN
Table of Contents
DORMAN 99164 Keyless Entry Remote
REMOVAL/INSTALL INSTRUCTIONS
ATTENTION: Refer to the appropriate shop manual for your vehicle to obtain specific service procedures for this part. If you do not have a service manual or lack the skill to install this part, it is recommended that you seek the services of a qualified technician. Pay special attention to all cautions and warnings included in the shop manual. Read and follow all instructions carefully. This product is only designed to function properly on specific vehicle applications. Please verify that the vehicle requirements match the product specifications and application notes for this part.
REMOVAL/INSTALL OF KEYLESS ENTRY REMOTE (99164) Chrysler 2003–00, Dodge 2005–00, Plymouth 2001–00
GENERAL TECH TIPS:
- DISCLAIMER: All currently programmed and new remotes must be reprogrammed to your vehicle. Please have all remotes in hand at time of programming.
- Due to the programming process being sensitive to voltage drops, it is recommended that a battery charger is hooked up to the vehicle before beginning the programming process.
Programming Instructions
- STEP 1: Turn vehicle ignition key to ON position, without starting the engine (Key-On Engine-Off—Position “1”).
- STEP 2 : Insert the programmer into the OBD II port, located under the steering column, near the pedals.
- STEP 3: Wait 10 seconds then press the LOCK and UNLOCK buttons on the key fob simultaneously for three seconds. Press the LOCK button for two seconds.
- STEP 4: Repeat Step 3 for all additional remotes.
- STEP 5: When all key fobs have been programmed, turn the ignition key off and remove the programmer from the OBD II port.
- STEP 6: Wait two minutes and verify each key fob functions properly. If programming was unsuccessful, restart the procedure.
Still need help?
Please call our Technical Support team for assistance from our team of
certified automotive
experts.1-800-523-2492
Disclaimer:
Even though every attempt is made to ensure this information is complete and
accurate, it is impossible to account for all possible circumstances or
situations. Please consult with a qualified auto technician before attempting
to perform any work you are not qualified to do. Automobiles can be hazardous
to work on; be sure to take all necessary safety precautions. Failure to do so
may result in property damage or personal injury. Certain motor vehicle
standards and performance requirements may apply to your motor vehicle (such
as Federal Motor Vehicle Safety Standards by the National Highway Traffic
Safety Administration). Be sure that your work is performed under such
standards and that you do not disable any motor vehicle safety features.
Dorman Products, Inc. | Corporate Office and Customer Service: 1-800-523-2492 ©2021 No reproduction in whole or in part without prior written approval.