NINJUTSO NM031-4K Sora Wireless Superlight Gaming Mouse User Manual
- June 15, 2024
- ninjutso
Table of Contents
NINJUTSO NM031-4K Sora Wireless Superlight Gaming Mouse
Product Information
The Sora is a plug-and-play mouse designed for easy use. It features adjustable DPI settings and a battery indicator.
Specifications
- DPI Settings: 400, 800, 1600, 3200
- LED Indicator: Flashes for DPI 400 and 800, stays lit for DPI 1600 and 3200
Product Usage Instructions
Changing DPI and Report Rate
To change the DPI value, follow these steps:
- Locate the DPI button on the mouse.
- Press the DPI button to cycle through the available DPI settings.
- Observe the LED indicator to determine the current DPI setting. The LED will flash for DPI 400 and 800, and stay lit for DPI 1600= and 3200.
Battery Status
The Sora mouse does not provide specific battery status information. Please ensure that you have fresh batteries or a charged battery pack to maintain optimal usage.
FAQ (Frequently Asked Questions)
- Q: How do I know which DPI setting is currently selected?
- A: The LED indicator on the mouse will provide feedback on the current DPI setting. It will flash for DPI 400 and 800, and stay lit for DPI 1600 and 3200.
- Q: Is the Sora mouse compatible with both Windows and Mac operating systems?
- A: Yes, the Sora mouse is compatible with both Windows and Mac operating systems. Simply plug it into a USB port and it should work without the need for additional drivers or software.
- Q: Can I use the Sora mouse wirelessly?
- A: No, the Sora mouse requires a wired connection via a USB cable to function.
How to Change DPI and Report Rate:
Sora is designed to be plug-and-play. You can change the DPI value by pressing the DPI button. The value and indicator status of both settings are as below:
DPI:
- 400:
- 800:
- 1600:
- 3200:
LED Indicator Status: Battery Status:
- Flashes: <10%
- Flashes” Charging
- Stays” FullFor more advanced settings such as macros, profile, DPI power management, etc., please download the software from https://ninjutso.com/pages/download
Warranty:
For any products or parts that become defective within one year from the date of purchase, you may send back the product and request for warranty. Purchase evidence, such as a receipt, order number, and such, and proof of the issue, like pictures, videos, and such, have to be provided for redeeming the warranty. Warranty only covers defects of parts or products caused by mis- manufacturing of functionality. It does not cover regular wear and tear, including but not limited to breakage due to abuse, water damage, improper usage, etc. The warranty expires if the product is opened without permission from Ninjutsu. To redeem the warranty, please contact the retailer where you purchased from or email us at support@ninjutso.com.
Federal Communication Commission Interference Statement
Changes or modifications not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment. This
equipment has been tested and found to comply with the limits for a Class B
digital device, under Part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference in a residential
installation. This equipment generates uses and can radiate radio frequency
energy and, if not installed and used by the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment
does cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try
to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and the receiver.
- Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
WEEE
This product must be disposed of with your other household waste or treated in compliance with the local regulations or contact your local city office, your household waste disposal service or the shop where you purchased the product.
Europe -EU Declaration of Conformity
Hereby, Poetry Society Technology Co., Ltd. declares that the equipment complies with directive RoHS 2.0(2015/863/EU), EMC Directive(2014/30/EU), and LVD(2014/35/EU) which are issued by the Commission of the European Community. Poetry Society Technology Co., Ltd. hereby confirms, to date, based on the feedback from our supplier indicates that our products shipping to EU territory comply with REACH(Registration, Evaluation, Authorization, and Restriction of Chemicals – (EC)1907/2006) compliance program. We are fully committed to offering REACH compliance on the products and posting accurate REACH compliance status for the all of products.