Joy-IT ESP-01S Remotely Controllable Relay Module User Manual
- June 4, 2024
- JOY-It
Table of Contents
Joy-IT ESP-01S Remotely Controllable Relay Module
GENERAL INFORMATION
Dear customer, thank you very much for choosing our product. In following, we will introduce you to what to observe while starting up and using this product. Should you encounter any unexpected problems during use, please do not hesitate to contact us.
PROGRAMMING THE ESP-01S RELAY MODUL
To use the ESP-01S relay module, you must first program the ESP-01S supplied on the product. For this, we recommend programming the ESP-01S with the ESP8266 PROG from 3. First, the Arduino development environment must be prepared for use with the ESP8266. To do this, the following URL is entered in the global settings of the pro-gram as an additional board administrator URL: https://arduino.esp8266.com/stable/package_esp8266com_index.json
Next, an additional board library must be installed. Open the board ma-nager and install the ESP8266 library. Please note that your Arduino development environment must be restarted if the board library is not displayed.
Once you have successfully installed the board, you can select the Gene-ric ESP8266 Module from the list of available boards.
Your Arduino development environment is now prepared for the use with an ESP8266.
CODE EXAMPLE
Now you can simply copy the following code example into your Arduino IDE and upload it to your ESP-01S.
After you have uploaded the code to your Esp-01S, you need to pull the ESP-01S programmer out of your PC and set the small switch on the side of PROG to UART so that you can see the serial output of the ESP-01S in your IDE. Once you have flipped the switch, you can put the programmer of your ESP-01S back into your PC and view the serial output of your ESP-01S to see if the connection to your WiFi was successful.
CONNECTION OF THE ESP-01S ON THE RELAY MODULE
After programming the ESP-01S, you can now unplug the ESP8266-PROG from your PC and remove the ESP-01S. In the next step, you have to make sure that you plug your ESP-01S cor-rectly on the relay module. In the following figure it is color-coded which pin of the ESP-01S belongs to which pin on the relay module.
After plugging the ESP-01S into
the relay module, you can now connect a supply voltage of 5 – 12 V. After
that, you can go to the website by simply entering the IP address you saw in
your serial output in your browser (enter the IP address in your browser on a
device that is in the same network as the ESP-01S).
ADDITIONAL INFORMATION
Our information and take-back obligations according to the Electrical and Electronic Equipment Act (ElektroG)
Symbol on electrical and electronic equipment:
This crossed-out dustbin means that electrical and electronic appliances do
not belong in the household waste. You must return the old appliances to a
collection point.
Before handing over waste batteries and accumulators that are not en-closed by
waste equipment must be separated from it.
Return options:
As an end user, you can return your old device (which essentially fulfils the
same function as the new device purchased from us) free of charge for disposal
when you purchase a new device.
Small appliances with no external dimensions greater than 25 cm can be
disposed of in normal household quantities independently of the pur-chase of a
new appliance.
Possibility of return at our company location during opening hours:
SIMAC Electronics GmbH, Pascalstr. 8, D-47506 Neukirchen-Vluyn, Germa-ny
Possibility of return in your area:
We will send you a parcel stamp with which you can return the device to us
free of charge. Please contact us by email at Service@joy-
it.net or by telephone.
Information on packaging:
If you do not have suitable packaging material or do not wish to use your own,
please contact us and we will send you suitable packaging.
SUPPORT
If there are still any issues pending or problems arising after your purcha-
se, we will support you by e-mail, telephone and with our ticket support
system.
Email: service@joy-it.net Ticket system:
http://support.joy-it.net Telephone: +49 (0)2845
9360-50 (10-17 o‘clock) For further information please visit our website: www
.joy-it.net
References
- ITnet | Servizi di Colocation e Cloud
- Joy-IT Helpdesk
- For Makers and Professionals | Joy-IT
- arduino.esp8266.com/stable/package_esp8266com_index.json
- ESP8266 PROG | Joy-IT
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>