SNAPPER PS-B006WA Universal Power Charger User Manual
- June 1, 2024
- SNAPPER
Table of Contents
SNAPPER PS-B006WA Universal Power Charger User Manual
Product Diagram
Product Parameter
WHAT’S INCLUDED
1 x Universal Power Charger Optional Accessories
□ 1 x AU Adapter Plug
□ 1 x EU Adapter Plug
□ 1 x UK Adapter Plug
User Guide
Note: If the device detects no wireless charging load, the wireless function will enter a dormant state after 32 seconds. To activate wireless charging, users will need to simply short press the power button to wake up the wireless charging function and start charging their device wirelessly, magnetic is only used to facilitate positioning.
CHARGING YOUR DEVICES
Using the Power Bank to charge your devices. Please use the below charging methods. You are able to charge multiple devices simultaneously. (This product supports the charging of laptops through either the USB-C port or a Type-C cable.) 1.Built-in Type-C Cable 2.USB-A Port 3.Type-C Port 4.Wireless Charger
Using as a pass-through Wall Charger
- Pull out the Prongs (or connect an Adapter Plug. There should be a click when inserted fully).
- Connect to a wall outlet.
- Plug a cable into the the USB-A or Type-C charging port and into your device.
- You can also use the Magnetic Wireless Charger whilst connected to a wall outlet.
Checking the Battery Level
- Quick press the power button and the current percentage level will display on the digital screen.
- Double click the power button or in standby for about 30 seconds, the display and power will be turned off automatically.
RECHARGING THE POWER BANK
There are two ways to recharge the internal battery:
- Use the Wall Plug & and an AC Outlet
- Use a Type-C to USB Cable connected to the Type-C Port.
WARNING
The power bank is NOT a toy and should be kept away from children.
Please do NOT use the power bank in direct sunlight or extreme heat for
extended periods of time.
Please do NOT submerge the power bank in water.
Please do NOT leave the power bank near the fire.
Please do NOT subject the power bank to harsh chemicals.
Please do NOT use the power bank if it has been damaged and/or modified.
Please do NOT insert any foreign objects into the openings or port of the
power bank.
Please do NOT attempt to disassemble, repair, or open the power bank in any
way.
FCC Caution
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
Any Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates uses and
can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
-Reorient or relocate the receiving antenna.
-Increase the separation between the equipment and receiver.
-Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
-Consult the dealer or an experienced radio/TV technician for help.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>