ALFOX AF-BH011 Surround Wireless Earbuds User Manual

SURROUND WIRELESS EARBUDS

SAFETY INSTRUCTIONS

Please read the instructions thoroughly before using this product and retain it for future reference.

• Do not use abrasive cleaning solvents to clean it.
• Do not expose the earbuds to liquids, moisture, or humidity.
• Remove and clean the ear tips regularly.
• Do not expose the earbuds to extremely high or low temperatures as this may damage the battery or deform the plastic parts.
• Do not throw the earbuds in a fire or dispose of them casually.
• Do not try to disassemble the earbuds. No user-serviceable parts inside.
• Try not to drop the earbuds or apply any force to the earbuds.
• Charge the earbuds from 5V USB ports such as phone chargers or computers.
• Do not use earbuds in thunderstorms to avoid malfunction or electric shock.
• Never listen to music at high volumes, or you may permanently damage your hearing.
• Never wear earbuds while riding, driving, or walking in traffic. Always stay aware of your surroundings.
• Always ask a professional technician or authorized personnel for repair.

PACKAGE CONTENTS

1SURROUND WIRELESS EARBUDS
1Type-C Charging Cable
6Ear Tips
1User Manual

KNOWING YOUR EARBUDS

Accessories

SETTING UP YOUR EARBUDS

Charging
We highly recommend that you fully charge the earbuds before using them for the first time.

1. Unplug the silicone cover on the charging port.
2. Plug in the Type-C cable to the charging port.
3. Connect to the power supply and it will start charging automatically.

Power ON/OFF

ON
Press MFB BUTTON for 2 seconds
OFF
Press MFB BUTTON for 3 seconds

USING YOUR EARBUDS

Bluetooth Caution

• Place the two devices to be connected close to each other and turn off the other Bluetooth devices.
• The maximum effective Bluetooth range may vary with the environmental circumstances. Obstacles (walls, fences, etc.) between the two devices may shorten the effective range.

Bluetooth Pairing

1. When the headset is not connected to the device, it will directly enter the pairing mode when it is turned on
2. Disconnect the phone, the headset goes directly into pairing mode
3. When the device is already connected, press and hold the Vol+ and Vol- buttons for 1 second to disconnect, and the Bluetooth will automatically enter the pairing mode

Status Indicator
Pairing: Blinking White/Red Alternately
Connected: The white light flashes every 10 seconds

Note:

• Each time you power on your earbuds, they will automatically connect to your last successfully connected device if available within the Bluetooth range.

Controls and Functions

| Previous Track| Press Vol – for 1 second
---|---|---
| Next Track| Press Vol + for 1 second
| Volume Down| Single press Vol –
| Volume Up| Single press Vol +
| Play / Pause| Single press MFB button
| Answer Call| Single press MFB button
| Hang Up| Single press the MFB button (during calling)
| Reject Call| Two-click MFB button
| Voice Assistant| Two-click MFB button
| Gaming Mode| Single press the G button

Note:

• To pair with another Bluetooth device, deactivate the Bluetooth function on the paired device, connect with a new device and turn on the Bluetooth of the original device.

CLEANING AND MAINTENANCE

Wipe only with a dry, soft cotton swab or equivalent. Never insert anything into the nozzle.
Remove the ear tips and rinse with mild detergent and water. Thoroughly dry before reattaching to your earbuds.

• Clean the ear tips and ear hooks regularly.
• Keep away from sharp objects to avoid scratches.
• Place in a dry and shady place if it is to be idle for a long time.
• DO NOT clean with detergent or chemicals.

FCC COMPLIANCE

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and the receiver.
• Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help

Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1)this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

WEEE COMPLIANCE
Correct Disposal of This Product (Waste Electrical & Electronic Equipment) (Applicable in countries with separate collection systems) This marking on the product, accessories, or literature indicates that the product and its electronic accessories should not be disposed of with other household waste at the end of their working life. To prevent possible harm to the environment or human health from uncontrolled waste disposal, please separate these items from other types of waste and recycle them responsibly to promote the sustainable reuse of material resources. Household users should contact either the retailer where they purchased this product, or their local government office, for details of where and how they can take these items for environmentally safe recycling. Business users should contact their suppliers and check the terms and conditions of the purchase contract. This product and its electronic accessories should not be mixed with other commercial wastes for disposal.

Email: support.jp@alfox.co
Manufacturer: Shenzhen Danya Technology Co., Ltd.
Address: Room 3323, Building C, Galaxy World Phase II, Mile
Community, MinZhi Street, Longhua District, Shenzhen, Guangdong, China

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>