DORMAN 924-793 Mechanical Key Relearn Ignition Lock Cylinder Instruction Manual
- June 1, 2024
- DORMAN
Table of Contents
DORMAN 924-793 Mechanical Key Relearn Ignition Lock Cylinder
Product Information
Specifications:
- Product Name: Mechanical Key Relearn Ignition Lock Cylinder
- Manufacturer: Dorman Products, Inc.
- Model Number: 924-793
- Key Coding Compatibility: Allows repinning of new lock cylinder to existing key
- Tool Requirements: No specialty tools required
Product Usage Instructions
Key Coding Instructions:
- Step 1: Check key slot alignment with raised indicators. Use a slotted screwdriver to turn key slot clockwise until aligned.
- Step 2: Ensure key can be inserted easily. If not, repeat Step 1. Do not force or turn key counterclockwise.
- Step 3: Rotate key clockwise until aligned with raised indicators.
- Step 4: Remove cap from tumbler shell and install tumbler assembly with key into the vehicle.
Before You Begin: Perform the key coding procedure before installation. Contact Technical Support at 1-866-933-2911 for assistance.
Frequently Asked Questions
- Q: Do I need any specialty tools for the key relearn process?
- A: No, this kit does not require any specialty tools for repinning the lock cylinder to your existing key.
- Q: What should I do if the key cannot be easily inserted during the coding process?
- A: Repeat Step 1 to ensure proper alignment of the key slot with the raised indicators. Do not force the key or turn it counterclockwise.
- Q: How do I contact customer service for further \assistance?
- A: You can reach Dorman Products, Inc. Corporate Office and Customer Service at 1-800-523-2492.
BEFORE YOU BEGIN
- Always wear proper safety equipment when performing repairs.
- Ensure at your point of purchase that this part fits your exact vehicle configuration.
- Reference the appropriate service manual for your vehicle. If you do not have a service manual and do not have the training or experience to perform the necessary procedures correctly, seek the services of a qualified technician.
NOTE: This kit allows you to repin your new lock cylinder to your existing keywithout requiring any specialty tools. Be sure to perform this key coding procedure prior\ to installation.
KEY CODING INSTRUCTIONS
STEP 1:
Key slot must be aligned with raised indicators. Use a slotted screwdriver to turn key slot clockwise ONLY (when facing key slot opening) until it is aligned with the indicators.
STEP 2:
Check that key can be inserted completely. If it cannot be easily inserted, repeat Step
- Do not force the key into the tumbler assembly or turn it counterclockwise to aid insertion.
STEP 3:
Rotate the key one-half turn (180°) clockwise until you hear a click and stop.
NOTE: If you rotate past click, turn the key clockwise until it is aligned with raised indicators again, as in Step 1.
STEP 4:
Rotate the key one-half turn (180°) counterclockwise until the key and tumbler assembly release.
STEP 5:
Remove the cap from the tumbler shell, then install the tumbler assembly with the key into the vehicle
Dorman Products, Inc. Corporate Office and Customer Service: 1-800-523-2492.
Disclaimer : It is impossible in these instructions to account for all possible circumstances or situations that you may experience when attempting to install this product. Please consult with a qualified auto technician before attempting to perform any work you are not qualified to do. Automobiles can be hazardous to work on; be sure to take all necessary safety precautions. Failure to do so may result in property damage or personal injury. Certain motor vehicle standards and performance requirements may apply to your motor vehicle (such as Federal Motor Vehicle Safety Standards by the National Highway Traffic Safety Administration). Be sure that your work is performed in accordance with such standards and that you do not disable any motor vehicle safety features.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>