DORMAN 929-1032 Utility Trailer Leaf Spring Instruction Manual
- June 1, 2024
- DORMAN
Table of Contents
DORMAN 929-1032 Utility Trailer Leaf Spring
Product Information
Specifications
- Product Name: Leaf Spring Measurement Tool
- Usage: Measure leaf spring dimensions accurately
- Application: Vehicle leaf spring measurement
Product Usage Instructions
Before You Begin
Ensure that you follow the necessary procedures correctly. If unsure, seek the services of a qualified technician.
Measurement Procedure
- Refer to the illustrations provided in the manual for accurate measurements.
- Measure the leaf spring dimensions with the spring in a relaxed state of the vehicle.
- Take measurements as follows:
- Length A: Measure along the leaf surface on the short side (inches).
- Length B: Measure along the leaf surface on the long side (inches).
- Arch: Measure the arch of the leaf spring (inches).
- Pack Thickness: Measure the thickness of the leaf pack (inches).
FAQs
Q: Can I measure the leaf spring dimensions while it’s still on the vehicle?
A: It is recommended to measure the leaf spring dimensions when the spring is off the vehicle and in a relaxed state for accurate results.
Q: What should I do if I have multiple leaf spring options for my vehicle?
A: Use the provided illustrations and follow the measurement procedure to accurately measure each leaf spring option before making a selection.
BEFORE YOU BEGIN
- Always wear proper safety equipment when performing repairs.
- Ensure this part fits your exact vehicle year, make, model, and configuration.
- You can verify at your point of purchase using the part number on the box, or using the part number above at DormanProducts.com.
- Reference the appropriate service manual for your vehicle. If you do not have a service manual and do not have the training or experience to perform the necessary procedures correctly, seek the services of a qualified technician.
- Some vehicle applications have multiple leaf spring options.
- Use the following illustrations to help obtain accurate measurements.
- Take spring measurements on the relaxed spring of the vehicle.
Slipper Style Spring
KEY
- A. Length A (in) Short Side
- Measure along the leaf surface
- B. Length B (in) Long Side
- Measure along the leaf surface
- C. Arch (in)
- D. Pack Thickness (in)
Disclaimer: Even though every attempt is made to ensure this information
is complete and accurate, it is impossible to account for all possible
circumstances or situations. Please consult with a qualified auto technician
before attempting to perform any work you are not qualified to do. Automobiles
can be hazardous to work on; be sure to take all necessary safety precautions.
Failure to do so may result in property damage or personal injury. Certain
motor vehicle standards and performance requirements may apply to your motor
vehicle (such as Federal Motor Vehicle Safety Standards by the National
Highway Traffic Safety Administration). Be sure that your work is performed
per such standards and that you do not disable any motor vehicle safety
features.
Dorman Products, Inc. | Corporate Office and Customer Service:
1-800-523-2492 | Tech Line:
1-866-933-2911
©2022 No reproduction in whole or in part without prior written approval.