ZEBRA L10 Kickstrap Kit User Guide
- June 1, 2024
- ZEBRA
Table of Contents
ZEBRA L10 Kickstrap Kit
Specifications
- Product Name: L10 Kickstrap
- Package Contents: Kickstrap, M3 x 14.3 Silver Screw (2)
Install Kickstrap
- Unpack the package contents.
- Install the Kickstrap using the provided M3 x 14.3 Silver Screws (2).
Secure Kickstrap
- Ensure the top handle is installed.
- Secure the Kickstrap using the silver screws provided. Do not remove top handle screws from the right side.
FAQ (Frequently Asked Questions):
Q: Can I use the Kickstrap without the top handle?
A: No, the top handle is essential for proper installation and usage of the
Kickstrap.
L10 Kickstrap Quick Start Guide
Install Kickstrap
- If Top Handle is installed proceed to step (1a).
- Keep Kickstrap closed during installation.
- Place Kickstrap as shown. Screws are captive.
Package Contents
- Kickstrap
- M3 x 14.3 Silver Screw (2)
Secure Kickstrap
- Hand tighten all 9 captive screws.
Top Handle Installed
- Remove only left bracket of handle.
- Install Kickstrap.
- Install left top handle bracket using long silver screws provided.
Notice: The information in this publication is subject to change without
notice. Zebra Technologies Corp shall not be held liable for technical or
editorial errors or omissions contained herein nor for accidental or
consequential damages resulting from the furnishing, performance, or use of
this material.
ZEBRA and the stylized Zebra head are trademarks of Zebra Technologies
Corporation, registered in many jurisdictions worldwide. All other trademarks
are the property of their respective owners. ©2019 Zebra Technologies
Corporation and/or its affiliates. All rights reserved.
PN: 176028