MOTOROLA SOLUTIONS APX N70 Smart Portable Radio User Guide
- June 3, 2024
- Motorola Solutions
Table of Contents
MOTOROLA SOLUTIONS APX N70 Smart Portable Radio
Important Safety Information
RF Energy Exposure and Product Safety Guide for Portable Two-Way Radios
ATTENTION!
Caution:
This radio is restricted to Occupational use only. Before using the radio,
read the RF Energy Exposure and Product Safety Guide for Portable Two-Way
Radios which contains important operating instructions for safe usage and RF
energy awareness and control for Compliance with applicable standards and
Regulations.
Radio Overview
-
RF Antenna
-
Status LED
-
ABC Switch
-
Touch Screen
-
a Display Sleep/Wake
(Short Press)
b Home button (Long Press) -
P1 to P6 Programmable buttons
-
Battery Latch
-
2-Dot (Side Bottom) Feature button
-
1-Dot (Side Middle) Feature button
-
Push-to-Talk (PTT) button
-
Purple (Side Top) Button
-
High Dynamic Range (HDR) Mic 1
-
On/Off/Volume Control knob
-
Channel Selector knob
-
2–Position Concentric Switch
-
Top Display
-
High Dynamic Range (HDR) Mic 2
-
3-Dot (Speaker Grill) Feature button
-
Speaker
-
Near Field Communication (NFC) Antenna
-
Battery
-
Charging Contacts
-
Accessory Connector
-
Emergency button
Attaching the Battery
Slide the battery into the radio frame until the side latches click into
place.
Attaching the Antenna
Rotate the antenna clockwise.
Turning the Radio On or Off
Ensure that the battery is fully charged before the first use.
Turning the Radio On
Turn the On/Off/Volume Control knob clockwise until it clicks.
Turning the Radio Off
Turn the On/Off/Volume Control knob counterclockwise until it
clicks.
Adjusting the Volume
- To increase the volume, rotate the On/Off/Volume Control knob clockwise.
- To decrease the volume, rotate the On/Off/Volume Control knob counterclockwise.
Selecting Zones and Channels
- Tap Zone/Channel in the Radio Control Widget.
- Tap Current Zone.
- Tap the desired zone.
- Tap the desired channel.
Radio Control Widget shows the selected zone and channel.
LED Indications
Notice:
- Z is the zone friendly name.
- C is the channel friendly name.
- V is the volume variable value as indicated:
- Low (10%)
- Medium (50%)
- High (100%)
- 1–10 (10%–100%)
P is the profile name.
Transmit and Receive Indicator
Color : Call State
- Light Blue Open
- Yellow Receiving
- Red Transmitting
- Grey Unprogrammed
Status Icons
- Battery
- Bluetooth®
- Global Positioning System (GPS)
- Long Term Evolution (LTE)
- Wi-Fi
- Downloading Data
- Unread Notification
- Direct Mode
- Power Level
- Monitor
- Received Signal Strength Indicator (RSSI)
- Scan
- Secure Operation
- User Login Indicator (IP Packet Data)
- Zone Bank
https://learning.motorolasolutions.com/User_Documentation
MOTOROLA, MOTO, MOTOROLA SOLUTIONS and the Stylized M Logo are trademarks or registered trademarks of Motorola Trademark Holdings, LLC and are used under license. All other trademarks are the property of their respective owners. © 2022 Motorola Solutions, Inc. All rights reserved.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>