LITEHAWK BRAVO R Exclusive Helicopter User Guide
- June 1, 2024
- LiteHawk
Table of Contents
LITEHAWK BRAVO R Exclusive Helicopter
8+
Please read warning and safety information guide included in the box before operation.
Calibrating and Pairing
Make sure your vehicle is on a flat, level surface
- Turn the helicopter on first, and then your controller.
- Move the left control stick all the way up, then all the way down.
- When your heli and controller are paired, you will hear a beep.
Getting Started
Charging the Battery
- Plug your USB charger into a USB port.
- Connect the USB charger located on the bottom of the helicopter. Make sure the helicopter is OFF.
- Charging takes around 45 minutes.
Infrared Camera
The BRAVO is equipped with an Infrared Camera! When the BRAVO detects a surface infront of it, it will avoid the obstacle automatically.
Installing the Controller Batteries
- Locate the battery door on the back of the controller. Unscrew and remove the door.
- Install 3 x AAA batteries. Note the correct polarity.
- Re-install the battery door.
3 x AAA 1.5v alkaline batteries (not included) are required.
LiteHawk Parts & Tech
There’s nothing worse than buying a new toy, having a question, or needing a
replacement part, and then being left out in the cold. No worries! We pride
ourselves on the very best customer service!
We have all the parts you’ll ever need to keep your new LiteHawk in tip top
shape! Like we always say,”accidents happen, even to the best of us” …. with
that in mind www.litehawk.ca is available 24 hours a day, 7 days a week!
We ship your parts Same Day! Except weekends of course – that’s when we are out playing too!
LiteHawk Guarantee
All LiteHawk products have been tested and designed to perform as claimed out of the box. If you have an issue with a product or part of a product please contact us directly. We cover claims towards manufacturing defects. We know that there is nothing worse than having a question or needing a replacement part and having nowhere to go. LiteHawk is not responsible for covering the costs of replacement parts or repair on products that have been damaged due to product use.
Controller Setup
Controller Functions
